Fantastic Video, answered a lot of queries in one Video. Thanks a ton. Just one Question. - I have 3 Deco M4 and was looking for Wired Which has only 2 Ethernet ports, and now i have 4 Tapo Cameras which i want to connect via Ethernet, Can we connect a Switch to the Main Deco and then connect other Deco to that Switch?? would that create the Ethernet Link in between them and bring all the IOT devices into the LAN?
Nice video! I have a network set up with 5 of these, the first one configured as an access point and the rest as mesh, all connected by cable. It is good to say that when I connect a sixth device in mesh mode, the network no longer seems to work as well, it seems that its maximum limit is 5 units. To solve this, I put 2 range extenders at the ends of the network and that is how all 7 units work.
Great video! I have a question: How can I connect the Reyee router with the Deco router so I can take advantage of the Reyee router's many antennas for better coverage, instead of letting it go to waste?
Thanks for mentioning the cat 6/7/8 cables! I have one question to ask though, if you’re paying for 1000mbps speed, will they go above or be capped at 1000? Also, what do you recommend better between the Wi-Fi 6E mesh and wifi7 knowing I have the 1000mbps service? Thanks in advance!
Typically they stop at 1000Mbps, some of them or most actually stop at 940Mbps for "gigabit". Either one is fine, wifi 6e is fast enough for gigabit if that's what you're asking.
I have Deco XE 75 three units system in my house And I also have M9 with 1.6.4 firmware that is not being used right now I am wondering if I can repropose the M9 for the coverage of the backyard Would there be a problem if I add M9 to XE75 network? Is it OK to mix different units on the same network under the same management console ??
Haw do you test lan speed Can you explain this in little more detail please? I have gigabyte size file stop watch and a calculator There’s got to be a better way 😅
there's a VPN option in the deco app. You have to set it up with your VPN in there, once that's enabled. Then all devices within the deco's network is under VPN
Product Link(s):
TP-Link Deco BE63 (3 Pack): www.amazon.com/dp/B0CN8QLS4K?maas=maas_adg_B8C1349305A83F9350DA87F5557A7885_afap_abs&ref_=aa_maas&tag=landpet05-20
TP-Link Deco BE63 (2 Pack): www.amazon.com/dp/B0CN8WBXY2?maas=maas_adg_22B3BD264DC4820978B0D3E5BF619867_afap_abs&ref_=aa_maas&tag=landpet05-20
8 Port Gigabit Ethernet Switch: amzn.to/3WayU9O
Cat7 Ethernet Cables: amzn.to/3Yf7pxD
NETGEAR Cable Modem (CM3000): amzn.to/3X3SfvD
As an Amazon Associate I earn from qualifying purchases
Fantastic Video, answered a lot of queries in one Video. Thanks a ton. Just one Question. - I have 3 Deco M4 and was looking for Wired Which has only 2 Ethernet ports, and now i have 4 Tapo Cameras which i want to connect via Ethernet,
Can we connect a Switch to the Main Deco and then connect other Deco to that Switch?? would that create the Ethernet Link in between them and bring all the IOT devices into the LAN?
Nice video! I have a network set up with 5 of these, the first one configured as an access point and the rest as mesh, all connected by cable. It is good to say that when I connect a sixth device in mesh mode, the network no longer seems to work as well, it seems that its maximum limit is 5 units. To solve this, I put 2 range extenders at the ends of the network and that is how all 7 units work.
Thanks for the video help me a lot. Make so easy to set up
Great video! I have a question: How can I connect the Reyee router with the Deco router so I can take advantage of the Reyee router's many antennas for better coverage, instead of letting it go to waste?
You can run it in access point mode by going to the options but I personally don't like to mix and match
This was super helpful👍
Glad you think so!
Thanks for mentioning the cat 6/7/8 cables! I have one question to ask though, if you’re paying for 1000mbps speed, will they go above or be capped at 1000? Also, what do you recommend better between the Wi-Fi 6E mesh and wifi7 knowing I have the 1000mbps service? Thanks in advance!
Typically they stop at 1000Mbps, some of them or most actually stop at 940Mbps for "gigabit".
Either one is fine, wifi 6e is fast enough for gigabit if that's what you're asking.
I have Deco XE 75 three units system in my house
And I also have M9 with 1.6.4 firmware that is not being used right now
I am wondering if I can repropose the M9 for the coverage of the backyard
Would there be a problem if I add M9 to XE75 network?
Is it OK to mix different units on the same network under the same management console ??
Haw do you test lan speed
Can you explain this in little more detail please?
I have gigabyte size file stop watch and a calculator
There’s got to be a better way 😅
So i cannot connect two wires directly from the modem to the mesh system !?
No
How to connect all devices to vpn on deco wifi system ?
there's a VPN option in the deco app. You have to set it up with your VPN in there, once that's enabled. Then all devices within the deco's network is under VPN