GDI Seal Replacement
Вставка
- Опубліковано 7 вер 2024
- To learn more about installing the GDI seal and other gaskets and seals, visit Garage Gurus fmgaragegurus.com.
When working with the gasoline direct injector, all manufacturers recommend replacing the Teflon seal if the injector is removed from the cylinder head. Master Technician Mark Ingram of Garage Gurus guides you through this important repair job in this instructive video.
Designed to hold back pressure and heat in the combustion chamber, the cylinder head could be destroyed if this seal fails. From removing the old seal to getting the new seal in place, Mark takes you through the entire process. Count on Garage Gurus to help you get your vehicle repair done right.
Feel free to share this video: • GDI Seal Replacement
Like us on Facebook: / garagegurus
Follow us on Instagram: / garagegurus
For informational purposes only. We are not liable for any damages resulting from your reliance on this content.
Real stuff you actually need to know to do the proper job, and why. Thank you.
Super helpful! I am a shade tree mechanic trying to clean injectors on a 2018 Honda Fit instead of replacing them. Have the seals but had no idea how to get them on the injector. Just picked up a tool (that I hope is compatible) that should help me finish the job!
did you get the tool for honda fit ?
@@karachioilchangeNo, I just used the fuel line/hose clamp hack and it worked.... OK
The trick to shrink the seal with your fingered first help so much. I deformed two seals trying without knowing this trick.
Great Job on the video!!
Even no Superlube teflon lubricant? Or creates lubricant a channel to slip pressure along?
But is noted!
Thanks for the tutorial. FIAT 1.8 ahead. Injectors to clean.
Can a high pressure pump be clogged? Have a fail code and according hick-ups once in a while...
Are the Teflon rings all the same size?
I just put new injectors, then i took them back out of the head because tney were in the way of getting another part out, am i now screwed and need to replace all the teflon rings again? Even though they were new and car never ran?
How put the rail injectors in is to tie for gm and Buick
Hi, can you tell me if you put any oil on the outter o-ring that connects to the fuel rail? Thanks in advance
Yes you should
Not oil!!
That might swell up the seal
Silicone lubricants or even soap
hi, please Can you tell me the measurements of the conical tool for Teflon?
César Scheid i would like to know myself these tools are ridiculously expensive for what they are. What did you end up using?
Surprised, no lube required during seal expand/resize operation
This tool is next to impossible to find. The SST in the Hyundai catalogue isnt even available anymore. Are these gdi combustion seal tools pretty much standard? If so, where do you recommend I purchase without cutting off a leg?
gmtoolsandequipment BWD They do not take leg parts as payment
ECS Tuning and Deutsche Auto Parts both have a similar toolset in stock: www.ecstuning.com/b-schwaben-parts/fuel-injector-puller-installer-tool-kit/p-695a/
Thanks.