Any check engine light show up when you installed the exhaust? I’m looking to get one but I’m worried about the their sensors as it would void my warranty?
Damn, sorry to hear that. Check out my other video showing my wheel install. I run Michelin pilot sport cup 2 connects. Although I took them off for winter, these are the stock pirelli’s in this vid that’s why they didn’t grip on that first launch.
@@BjWraps I'll check it out! Ty sir! Dealer put new rotors and brakes today w only 10k miles on it. Omw to go pick it up today. The stuff your doing is next level. Going to watch wheel install now ty sir.
@@BjWraps The Michelins look better and I hear they are better but I didn't want to default to them. At this point I have no choice. I really wanted to like the pirrellis but they have to go now.
Any drone when cruising at highway speeds with the valves closed? This setup has been on my wishlist for awhile but every other car I've owned with a downpipe had terrible drone when on the interstate so I was really hoping the combo of the resonated DP and valved exhaust would be close to stock (OEM Sport Catback)
It sounds as close to stock as you can get when the valves are closed. I absolutely love this exhaust setup. No drone, with valves closed it’s just a little louder. I will do another video soon of the exhaust on comfortable mode.
how much louder is this than stock catback? I'm getting the uni dp here in a couple days and I have catless mids - looking to get boostlogic around the time they do their black friday sale this year. I kinda wanna get non-valved though, valve rattle annoys the living sh!t out of me and I've got it on my stock catback so not looking to deal with that again. Could you daily this setup with catless mids and no valves? Any drone on the highway with valves open? I'm lucky enough to be neighbors with car guys so they won't mind loud startups in the mornings
Do me a favor and dm me on ig @printcoatwrapit I will give you in-depth info. There is absolutely no rattle with my valved system and it comes with catless mids and I have the uni dp. What your referring to on you stock set up is waste-gate rattle
@@BjWrapsoh no on my stock setup is 100% valve rattle lol. I'm sure some of it is WG rattle but I definitely have a valve problem. It goes away when I open the valves which is how I know it's not a wastegate rattle issue, but my car is basically undrivable with the valves closed.
@@RS3NDIT yikes, well did you throw it on a lift and try to tighten them? I just posted a short of my wife driving my rs3 home. On our block you can hear a pin drop, at this time of night and it was super quiet. I’m also selling my boostlogic on Facebook marketplace if you interested.
Already knew about it. We thoroughly wiped it down with alcohol after installation. Not our first rodeo 😁 Thanks for watching, and consider giving a sub.
You can't lift a cat back like that with one hand if it's stainless also the pie cuts are indicative of titanium. Also I mentioned the price point, at such a high price it's titanium. Thanks for watching.
They sent the springs overnight. Remember it takes many man hours to create titanium pie cuts. And the whole thing being so light made it worth it to me, it’s really a work of art. My buddy had an awe and said it sounded horrible only other one I like is bull x but it’s not lightweight like this one.
Maybe mention in your description that it's mated to the Uni downpipe...glad it was mentioned in the vid. Sounds good mang!
Sounds amazing 👌🏻🏎️💨💥💥🔥🔥🔥🔥
Any check engine light show up when you installed the exhaust? I’m looking to get one but I’m worried about the their sensors as it would void my warranty?
Zero cel
What kind of tires do you use now? I still have those pirellis p zero. Cracked my rim the other day and got a flat 🤔
Damn, sorry to hear that. Check out my other video showing my wheel install. I run Michelin pilot sport cup 2 connects.
Although I took them off for winter, these are the stock pirelli’s in this vid that’s why they didn’t grip on that first launch.
@@BjWraps I'll check it out! Ty sir! Dealer put new rotors and brakes today w only 10k miles on it. Omw to go pick it up today. The stuff your doing is next level. Going to watch wheel install now ty sir.
@@BjWraps The Michelins look better and I hear they are better but I didn't want to default to them. At this point I have no choice. I really wanted to like the pirrellis but they have to go now.
Sounds sick, what is the size of the muffler inlet and outlet?
4 inch, it’s insane looking and sounding in person
Amazing build brother ❗️❗️❗️❗️❗️
Does this rs3 8v have gpf /opf. The later versions do
Any drone when cruising at highway speeds with the valves closed? This setup has been on my wishlist for awhile but every other car I've owned with a downpipe had terrible drone when on the interstate so I was really hoping the combo of the resonated DP and valved exhaust would be close to stock (OEM Sport Catback)
It sounds as close to stock as you can get when the valves are closed. I absolutely love this exhaust setup. No drone, with valves closed it’s just a little louder. I will do another video soon of the exhaust on comfortable mode.
@@BjWraps that would be amazing! I’ll subscribe and keep an eye out!
How’s the drone with this system.. do you get any ???
Beautiful exhaust! Both valves closes?
🙏yes both valves
how much louder is this than stock catback? I'm getting the uni dp here in a couple days and I have catless mids - looking to get boostlogic around the time they do their black friday sale this year. I kinda wanna get non-valved though, valve rattle annoys the living sh!t out of me and I've got it on my stock catback so not looking to deal with that again. Could you daily this setup with catless mids and no valves? Any drone on the highway with valves open? I'm lucky enough to be neighbors with car guys so they won't mind loud startups in the mornings
Do me a favor and dm me on ig @printcoatwrapit I will give you in-depth info. There is absolutely no rattle with my valved system and it comes with catless mids and I have the uni dp. What your referring to on you stock set up is waste-gate rattle
@@BjWrapsoh no on my stock setup is 100% valve rattle lol. I'm sure some of it is WG rattle but I definitely have a valve problem. It goes away when I open the valves which is how I know it's not a wastegate rattle issue, but my car is basically undrivable with the valves closed.
@@RS3NDIT yikes, well did you throw it on a lift and try to tighten them? I just posted a short of my wife driving my rs3 home. On our block you can hear a pin drop, at this time of night and it was super quiet. I’m also selling my boostlogic on Facebook marketplace if you interested.
@@BjWraps oh? Gimme a link bro, if you’re close to VA I’ll come get it for you.
@@RS3NDIT facebook.com/groups/415473076030549/permalink/1306534313591083/?mibextid=9R9pXO
I'm ignorant when it comes to this stuff but is the exhaust legal? I'm between this and Scorpion Resonated cat-back with electric valves.
yes its legal, I'm unfamiliar with the scorpion but I am very happy with this exhaust all around!
@@BjWraps thank you.
Sounds sick!
Nice vids little tip use gloves when touching titanium once it heat cycles finger print stains appear
Already knew about it. We thoroughly wiped it down with alcohol after installation. Not our first rodeo 😁 Thanks for watching, and consider giving a sub.
Yoo enjoyed the vid! Sounds good too,
Does the exhaust vibrate really bad? I have this setup on my TTRS and it vibrates a lot. Also mine hangs really low too.
No, not at all. You might be hearing the Infamous wastegate rattle. Is yours valved? The valves could be loose
I was right in the money with my weight guess on the exhaust
not gonna lie the stock chrome exhaust with the red and black screams old corvette guy
Stock oval tips you mean? It’s a Porsche audi thing representative of racing sports or RS.
This exhaust come with valves ?
@@jenniferlim522 I mentioned it in the video
I can’t really tell the difference.. I have a 2020 with unitronic catless mids stock exhaust.. and I feel like it sounds the same
I was running catless mids at first, and the difference in sound is night and day. It completely wakes up the car, there’s a huge difference
So sick
Hi. Is this a cat back exhaust
yes
10:50 Wastegate rattle at its best :-/ same problem here
Is this stainless or titanium
You can't lift a cat back like that with one hand if it's stainless also the pie cuts are indicative of titanium. Also I mentioned the price point, at such a high price it's titanium. Thanks for watching.
You have any valve rattle?
No, you can still hear the wastegate rattle every now and again though.
5k for the exhaust… no gaskets, no spring for the flaps.. damn man.
They sent the springs overnight. Remember it takes many man hours to create titanium pie cuts. And the whole thing being so light made it worth it to me, it’s really a work of art. My buddy had an awe and said it sounded horrible only other one I like is bull x but it’s not lightweight like this one.