Clutch Replacement For Classic Mini Cooper

Поділитися
Вставка
  • Опубліковано 2 жов 2024
  • Join us in the workshop as we replace a faulty clutch on a customer's Classic Mini Cooper.
    If you are looking to support the Hickey Race Engineering channel you can make a donation at ko-fi.com/hreirl
    Please follow us on our other platforms
    Website: www.hre.ie
    Facebook: / hreirl
    Instagram: / hre_irl
    Tiktok: vm.tiktok.com/...
    Twitter / hickeyraceeng

КОМЕНТАРІ • 78

  • @unclekevin5094
    @unclekevin5094 3 роки тому +7

    Many years ago a Man called Mark Evans made 10 thirty minute videos about his trip taking a dead MGB from a scrap yard and completely re-building it.After the first episode it was compulsive viewing. He approached the Discovery Channel and the series was so popular that he made several further series, rebuilding an E type Jaguar, a motorcycle, a racing car, a helicopter and an airplane among other things. You have as much personality and skill as he has and I really feel that you should try and approach your local TV station or Discovery again and propose something similar because what you show each week deserves to reach a wider audience. I am now resorting to buying extra large bags of popcorn getting ready for Gretel.

    • @HREIRL
      @HREIRL  3 роки тому

      I am honered you put me in the Same catagory as Mark Even, I have watch all the "is born" series and I have to say they where very well produced and a joy to watch. Maybe some day we can produce somthing simlar here but with the freadom of youtube to put our own stamp on it 👍👍👍

    • @williamowen2203
      @williamowen2203 3 роки тому

      A Car Is Born... Brilliant series. I think he did an AC Cobra kit as well. Thanks for that reminder.

    • @unclekevin5094
      @unclekevin5094 3 роки тому +1

      @@williamowen2203 He did a helicopter, an airplane, a motocycle and many cars. He also did a miniseries where he traveled around Britain visiting people who were doing their own restorations and who had stopped because of various problems and he helped them finish the job. A very talented man who got his big break because as a vet he did not agree with the advice a BBC vet program was giving and when they invited him on to defend himself he was so eloquent that they made him their spokesman.

  • @ToddDunning
    @ToddDunning 2 роки тому

    Best mini clutch replacement video out of hundreds, short and to the point.

  • @28854david
    @28854david 3 роки тому +2

    Great video Paul. Super glue and me probably ambulance and skin graft 😊

    • @HREIRL
      @HREIRL  3 роки тому

      Thanks Dad, that gave me a laugh I can honestly imagine it

  • @Conor.Twomey
    @Conor.Twomey 3 роки тому +1

    Great explanation on the clutch settings.

    • @HREIRL
      @HREIRL  3 роки тому

      Thanks Connor 👍

  • @normanporter743
    @normanporter743 3 роки тому +1

    I used a length of welding rod rapped it round the bolt put the washer and nut on pulled the wire off worked great

    • @HREIRL
      @HREIRL  3 роки тому

      Great idea thanks for shareing

  • @daryldeuter683
    @daryldeuter683 3 місяці тому

    Fantastic video, just a question about the locking tab on the centre bolt ? Are you able to lock it with the pressure plate on ?

  • @classicminidetails8887
    @classicminidetails8887 3 роки тому +2

    22 minutes to fit a clutch, take me that long to fit my reg plate 🤣

    • @HREIRL
      @HREIRL  3 роки тому

      Haha I do like to drag things out 😁😁

  • @minidoido1
    @minidoido1 3 роки тому +1

    Very educational. Thank you. On another subject where did you/customer get those bonnet hinges from?

    • @HREIRL
      @HREIRL  3 роки тому

      Im not sure, but I do know there not available anymore unfortunately

    • @minidoido1
      @minidoido1 3 роки тому

      ​@@HREIRL Ok. Thanks. Do you have happen to have close up photos of the hinges? Curious to see how they worked.

  • @2tall4shorts12
    @2tall4shorts12 3 роки тому +2

    How do you tab over the crank lock washer with the diaphram in place, or don't you bother with a lock washer?

    • @HREIRL
      @HREIRL  3 роки тому +1

      Hi Colin, not a case of not bothering, I have designed and machined my own key washer when used in combination with a good qulity OEM flywheel retention bolt omits the need for a lock washer 👍

    • @2tall4shorts12
      @2tall4shorts12 3 роки тому

      @@HREIRL Is this covered in one of the other vids and is this part available to purchase from you as it's a PITA to get the flyweel off without taking the diaphram off to flatten out the lock washer?

  • @CTRLaltKNIFE
    @CTRLaltKNIFE 3 роки тому +2

    nice minivation hinges those are not made anymore i dont think.

    • @HREIRL
      @HREIRL  3 роки тому +1

      They are such and awsome piece of engineering its very unfortnate they are still not in production

  • @franciscomelendez3894
    @franciscomelendez3894 3 роки тому +2

    Paul ;
    Great instractional Video, much better than the usual manual...!
    It's a tough gob, for anyone, but you make it look easy!
    Thought of building a motorcycle type dry open clutch, modified right hand engine suport and clutch activator.
    👍👍

    • @HREIRL
      @HREIRL  3 роки тому

      Thanks francisco Im glad you enjoyed, Intresting idea 👍

  • @TheGentlemensMotorRacingTeam
    @TheGentlemensMotorRacingTeam 3 роки тому +2

    Genius idea with the super glue - I can see me trying that technique - keep up the good work sir.

    • @HREIRL
      @HREIRL  3 роки тому

      Thanks sir, It dose work exceedingly well 😁

  • @javierrubio4434
    @javierrubio4434 Місяць тому

    Hi! Great video. My mini shifts worse when the engine is warm. I have noticed that it is a clutch problem, do you think it is a wear or adjustment problem. Thank you very much.

  • @midgelambert3880
    @midgelambert3880 Рік тому

    Hi Paul, I was wondering if you had any ideas on why my clutch refuses to disengage when I push the clutch pedal in. I have bled the slave cylinder and adjusted the clutch arm return stop to .020 " Also I have adjusted the throw out stop. When I start the car after putting it in gear with the clutch depressed it lurches forward indicating that that there is no pressure being put on the pressure plate. I would appreciate any ideas on what could possibly be wrong.

  • @thomasfarrell9482
    @thomasfarrell9482 3 роки тому +2

    The best demonstration and set-up of a mini clutch I have ever seen. I don't know how many times I have changed a mini clutch to find the awkward bolt missing. Superglue was a good idea, I often got away with putting a small rubber hose over the top of the bolt. I doubt many go to the. trouble you do; nice to know what separates the best. Again I say, the video is excellent, clear and helpful, nothing hidden. Great as usual; this should be on the curriculum.

    • @HREIRL
      @HREIRL  3 роки тому

      You are welcome! thanks for the awsome feedback 👍👍

  • @jerrooney8714
    @jerrooney8714 3 роки тому +2

    You make it look so easy Paul I always look forward to seeing how you overcome problems it's always an education, great video.

    • @HREIRL
      @HREIRL  3 роки тому +1

      aww thanks Jer I aloways look forward to reading your coments thanks for stoping by 👍👍

  • @tyronecorbin9982
    @tyronecorbin9982 3 роки тому +1

    Good evening i have a question for you .i am have serious problems with duties importing tyres and rims for my classic mine .A tyre shop here can supply me with a set of 8x13 with a 7 degree offset will these touch the shocks.

    • @HREIRL
      @HREIRL  3 роки тому

      Very hard to tell with out seeing them Tyrone, what brake and hub setup is you mini running and do you know how much of the "8 is offset to the inside is it 50/50 or a different bios?

    • @tyronecorbin9982
      @tyronecorbin9982 3 роки тому

      I try the 8x13 this morning they came nearly 2inches from under the arches i am using 8.4 vented disc.

    • @tyronecorbin9982
      @tyronecorbin9982 3 роки тому

      They are -7 offset.

  • @milanbauer4226
    @milanbauer4226 3 роки тому +1

    the engine head is cool :-)

    • @HREIRL
      @HREIRL  3 роки тому

      It top class 👍

  • @63MIJ63
    @63MIJ63 Рік тому

    Can you change the primary gear without taking the engine out and doing what you did?

  • @carlreeve
    @carlreeve 3 роки тому +2

    Another great video, do you know the paint code of that blue as its stunning!

    • @HREIRL
      @HREIRL  3 роки тому +1

      Hi Carl I will check with the customer Im not 100% sure it however is a stunning colour couldnt agree more

    • @tobymiddleton6763
      @tobymiddleton6763 3 роки тому

      Also would like to know this 😀

    • @tonycamplin8607
      @tonycamplin8607 3 роки тому +1

      Going from my memory of BMC colours I think that it's ocean blue.

  • @CooperSTraveller
    @CooperSTraveller 3 роки тому +1

    That’s a job I do not like doing one bit with the engine in the bay ... you made it look easy. Great tip with the super glue and taped finger for getting the mounting bolt back in.

    • @HREIRL
      @HREIRL  3 роки тому +1

      Thanks Ian, just one of those things you come up with on the spure of the moment and you be lost with out now hahaha

  • @specdel
    @specdel 3 роки тому +1

    Oooh Paul! Heart in mouth all the time watching this! If it had been me (accident prone by profession) within 5 minutes of taking off the breather for the drop gear housing I would have lost a 5/16 UNC bolt or washer down the orifice! Lovely clean engine, and thanks for the tape on finger super glue tip - does it work for the master cylinder clevis pins too? How does that mini ride with those Minitastic type coil springs? Thanks yet again for a super video.

    • @HREIRL
      @HREIRL  3 роки тому

      Haha as yet touch wood I have never droped anything down there 😅. Not sure about the coils yet I will retain my verdict untill I have driven it a bit more :)

  • @robuk8682
    @robuk8682 3 роки тому +1

    I baulked at changing my verto clutch with the engine in, took me days of work mind, but won in the end! Also gave me a chance to sort the oil leaks, fit new water pump and timing chain etc, and clean, tidy and paint things in general. It was helpful to have the engine out for all that. Hope my nuts don’t come off as my bolts are ‘wrong way in’, however I did make them captive with a spot of weld having determined their correct positioning. Another great video Paul, the’re all most appreciated, keep them coming! Rob

    • @HREIRL
      @HREIRL  3 роки тому

      Thnaks rob glad you enjoyed 👍

  • @paulp96275
    @paulp96275 3 роки тому +1

    Great Paul I think I learned my bad language from that engine mounting bolt install you made it look easy ,the cylinder head looks the real deal I remember a lot of the cross flow minis from racing with 40 or 45s carbs thanks Paul for a great vid 👍👨🏻‍🏭🇬🇧

    • @HREIRL
      @HREIRL  3 роки тому

      It has and will always be a royal pain in the posteriour lol, Yes cylinder head is a series piece of kit very well engineered

  • @russell5790
    @russell5790 3 роки тому +2

    Never realised it was possible to change the clutch without removing the engine. Another day of learning something new. :)

    • @HREIRL
      @HREIRL  3 роки тому

      Ya its not one of the nicer jobs but its doable and can save a bit of faffing around

    • @russell5790
      @russell5790 3 роки тому

      @@HREIRL My engine is out so maybe I should replace the clutch (if I can work out if it needs a new one) before it goes back in.

    • @DannyTipple
      @DannyTipple 3 роки тому

      Try doing it with a servo 😂

  • @rhysdigby-gu9ql
    @rhysdigby-gu9ql 3 роки тому +1

    hi paul,another great episode,you make these videos a lot more enjoyable than mine,found the superglue trick funny,with me being accident prone not sure that would end up well with me,i have in the past with tricky bolts drilled a hole through them and sent a length of welding wire through them,,only need to get the bolts near then pull the wire and the bolt come through the hole,,some people i know elongate the holes for ease but im not a fan of that,a hole is that size for a bolt that size in my mind..keep up the great work...

    • @HREIRL
      @HREIRL  3 роки тому

      Hi N, thanks for you lovely coments as always, thats a very intresting Idea with the welding wire never seen it done that way but dose make sense nice 👍

  • @gavinivers8941
    @gavinivers8941 3 роки тому +1

    Good Video

    • @HREIRL
      @HREIRL  3 роки тому

      Thanks Gavin

  • @nrhobson
    @nrhobson 3 роки тому +1

    Again another use for a magnet to put that bolt in, small magnet under a cutoff finger of rubber glove.

    • @HREIRL
      @HREIRL  3 роки тому

      Love it I will deffo be trying this 👍👍

  • @ryancamilleri9473
    @ryancamilleri9473 2 роки тому

    Hi hre i have some problems with my.mini clutch at the moment any help? Maybe email? Tks keep it up

    • @HREIRL
      @HREIRL  2 роки тому

      sure Ryan bang us an email hickeyraceengineering@gmail.com

  • @LoneStarMini
    @LoneStarMini 3 роки тому +1

    Why am I just now finding your channel.... good stuff.

    • @HREIRL
      @HREIRL  3 роки тому +1

      Hi Friend, delighted you found the channel as now I found yours and I will be catching up on your videos over the coming weeks. thanks for stoping by.

    • @LoneStarMini
      @LoneStarMini 3 роки тому

      @@HREIRL HRE.. my learning curve on all things mini has begun, I have just removed my first flywheel. After watching this video, I am left wondering what exactly is the ‘diaphragm’ you refer to within the flywheel complete assembly?

  • @patrickcallaghan1714
    @patrickcallaghan1714 3 роки тому +1

    Another great video, I shall have to try the super glue trick !!!

    • @HREIRL
      @HREIRL  3 роки тому +1

      Its the boom Patrick works everytime, some of the time hehe

  • @michaelneubauer6141
    @michaelneubauer6141 2 роки тому +1

    Best clutch video by far, thank you!

    • @HREIRL
      @HREIRL  2 роки тому

      Thanks Michael, glad you enjoy it 👍

  • @tobymiddleton6763
    @tobymiddleton6763 3 роки тому

    That was brilliant. Once again some great little tricks and tips. This video will be really helpful for setting up clutches in the future. Thanks HRE

    • @HREIRL
      @HREIRL  3 роки тому

      Your Welcome Toby thanks for tuning in 👍

  • @2tall4shorts12
    @2tall4shorts12 3 роки тому

    When taking the breather off the dropgear housing always cover the hole with a bit of masking tape. Got the same 7port on my project mini :)

    • @HREIRL
      @HREIRL  3 роки тому

      Thanks for your coment Colin 👍

  • @garydempsey3332
    @garydempsey3332 3 роки тому +1

    Top work Gentleman!

    • @HREIRL
      @HREIRL  3 роки тому

      Thank you kindly sir

  • @thebluep0tat0
    @thebluep0tat0 3 роки тому +1

    Great video!