Hi, friend. the red or black cables, is it important to distinguish between the two red ones? each red has a position, or that would not matter? thanks in advance
Not much different and not hard to do if you can solder. The biggest difference is the leg spring joint and some screws you’ll have to find that aren’t like this but not any harder to do.
So I have a question, is this the same method when you are getting a barometer failure notice on screen or is that something else? Thank you in advanced.
It goes by a few names but most common is relay booster board. It is also referred to as a repeater board. There are two types so you need to identify yours. One has a fixed plug in board location and one has a wire from the board to plug in.
@@QCGUY mine is with the plug fixed on the board. And boy howdy you weren't kidding bout them being so fragile. Thankfully I've gotta replace it anyways, cause the damn thing came right off the board. Thank you so damn much man. I was getting sick of getting a headache from looking for the name of that board. Their not easy to find in the USA online either. Now I'm going to hace to wait months for China to ship this damn thing......anyways thank you man
@@QCGUY I definitely played the waiting game. So I apparently ordered a repeater board some time ago, March 14th to be exact, but hey not like I looked a million times while tracking the package when I realized I ordered it. But I had a situation happen to occur to me, I was done flying and my trusty ol hubs (my drones name lol) was almost home it was around 200-300 feet away or so and right at 100 feet up. Because of trees and stuff, when I have hubs above me I like to bring it down myself if possible, I live in southern Missouri in the Ozarks. So there's plenty of trees. But I see hubs n I take control, n thought a good ol twisty turnt thingy was a good idea, n boy was it not!!!! It started flipping towards the ground, and so damn fast to! I thought it's aim was a pond out in front of my house. Thankfully no, just a thorn bush the size of Texas. But I got it back eventually. With a broken motor housing on one of the arms. That's when I realized that I had ordered the board. N I needed it, from the circus flip act it did, it also said hello to that board. So yeah that happened lol....sucked a lot. But now I can't get the new board to power the fan at all. Im getting the first set of tones before the pause on start up. But no second set. I dunno what I'm doing wrong ill figure it out but it's just a little grrrrrrrr so I keep walking away from it every now and again lol. I have another pro plus for some parts. Sorry so long of a story. Funny how I subconsciously knew I was going to be breaking the part I ordered a while ago for some reason lol. Take it easy man. Thanks again.
Hey man, do You still do fixing for ppl? If so how do i go about sending this to ya. I can't figure it out and im done with it. I have two like I said, one for parts and the one I use/used. If you could maybe send me a e mail I can get ahold of you at. And if your ok with it I'll send my phone number in an email or how ever and whatevvr I need to do.
Sir i ihave a problem on my hubsan zino pro..i brought for a replacement of rear arm left then the wirings color is different on my actual hubsan zino pro the colors of the replacement is red and red stripe black..but the wirings of my hubsan zino is all black i really really confuse how i can connect what will i do...coz i tried twice but not work the rare arm left..i hope you read my message and hoping for youre reply thank you..
Please be advised that: after falling , 2 times of replacement the new esc and motor for hubsan zino pro plus, it still alway one motor right rear leg not working , please be advised or do you have some advised what to do next ....????
Hello my friend, I would like your help, I have a hubsan zino pro, and suddenly the rear right engine stopped ... what could have happened, the engine burned out, or something else ....
26:00 To start the replacing back leg portion.
I hope this helps..Thanks ✌️
Tnx
Great video, glad to see you back! Dave from OKC⚓️
Hi, friend. the red or black cables, is it important to distinguish between the two red ones? each red has a position, or that would not matter? thanks in advance
They determine the rotation Of the motors. Both A motors should be the same and both B motors should be the same but opposite between A and B.
@@QCGUY thanks!
Are spare parts of Zino and Zino Pro the same?
Several things are and several aren’t...
Was wondering if this is the same process for the Zino 2+? Thanks for doing these videos!!! Very helpful!!!
Not much different and not hard to do if you can solder. The biggest difference is the leg spring joint and some screws you’ll have to find that aren’t like this but not any harder to do.
So I have a question, is this the same method when you are getting a barometer failure notice on screen or is that something else?
Thank you in advanced.
Replacing arms is nothing in relation to a barometer failure so I’m not sure what you’re asking here...sorry
What is the barometer wire called or maybe the part # thanks
I broke it. I took care and it still broke. Damn
Gyroscope FPC
Sry to bother ya, but what in God's good green earth is the board called that the fan plugs into on the zino pro plus?
It goes by a few names but most common is relay booster board. It is also referred to as a repeater board. There are two types so you need to identify yours. One has a fixed plug in board location and one has a wire from the board to plug in.
@@QCGUY mine is with the plug fixed on the board. And boy howdy you weren't kidding bout them being so fragile. Thankfully I've gotta replace it anyways, cause the damn thing came right off the board. Thank you so damn much man. I was getting sick of getting a headache from looking for the name of that board. Their not easy to find in the USA online either. Now I'm going to hace to wait months for China to ship this damn thing......anyways thank you man
@@jacobcooley242 Glad to help and yes the waiting game is the worst part but hopefully it won't be as long as you expect.
@@QCGUY I definitely played the waiting game. So I apparently ordered a repeater board some time ago, March 14th to be exact, but hey not like I looked a million times while tracking the package when I realized I ordered it. But I had a situation happen to occur to me, I was done flying and my trusty ol hubs (my drones name lol) was almost home it was around 200-300 feet away or so and right at 100 feet up. Because of trees and stuff, when I have hubs above me I like to bring it down myself if possible, I live in southern Missouri in the Ozarks. So there's plenty of trees. But I see hubs n I take control, n thought a good ol twisty turnt thingy was a good idea, n boy was it not!!!! It started flipping towards the ground, and so damn fast to! I thought it's aim was a pond out in front of my house. Thankfully no, just a thorn bush the size of Texas. But I got it back eventually. With a broken motor housing on one of the arms. That's when I realized that I had ordered the board. N I needed it, from the circus flip act it did, it also said hello to that board. So yeah that happened lol....sucked a lot. But now I can't get the new board to power the fan at all. Im getting the first set of tones before the pause on start up. But no second set. I dunno what I'm doing wrong ill figure it out but it's just a little grrrrrrrr so I keep walking away from it every now and again lol. I have another pro plus for some parts. Sorry so long of a story. Funny how I subconsciously knew I was going to be breaking the part I ordered a while ago for some reason lol. Take it easy man. Thanks again.
Hey man, do You still do fixing for ppl? If so how do i go about sending this to ya. I can't figure it out and im done with it. I have two like I said, one for parts and the one I use/used. If you could maybe send me a e mail I can get ahold of you at. And if your ok with it I'll send my phone number in an email or how ever and whatevvr I need to do.
Beau boulot comme dab😉
Sir i ihave a problem on my hubsan zino pro..i brought for a replacement of rear arm left then the wirings color is different on my actual hubsan zino pro the colors of the replacement is red and red stripe black..but the wirings of my hubsan zino is all black i really really confuse how i can connect what will i do...coz i tried twice but not work the rare arm left..i hope you read my message and hoping for youre reply thank you..
Phil Casapao Sounds like they sent you the Zino arm and it won’t work because it has a different esc. Did it just sit there and beep at you?
@@QCGUY yes i try to see the esc and its diffirent to my arm esc
Please be advised that: after falling , 2 times of replacement the new esc and motor for hubsan zino pro plus, it still alway one motor right rear leg not working , please be advised or do you have some advised what to do next ....????
My drone is zino pro plus , thanks
facebook.com/groups/HubsanQC/?ref=share_group_link
Thanks
Hello my friend, I would like your help, I have a hubsan zino pro, and suddenly the rear right engine stopped ... what could have happened, the engine burned out, or something else ....
Motors burn out and so do esc's but I never change just one. I change motor and esc every time. Never have any issues that way...
@@QCGUY Thank you very much for the information, I hope the spare parts come soon, and I fly again 🇬🇷✈️
One question, if you get the gibbal erorr 0x0080 what can it be, more problem ... Should I change something in it? 🇬🇷✈️🇬🇷
@@user-djipilotthymios usually it’s a problem with the gimbal flex cable but I would have to see video and know more.
@@QCGUY
how to send you a video .... in gmail,
does not send video here