I don’t think that I was even able to get 10 rounds through mine. Swapped out the upper with my X Macro, and the Fuse lower/X Macro upper worked just fine. X Macro lower/Fuse upper was FTF, same as the original configuration. Called the shop where I bought and to tell them about it, and how I should go about getting this fixed. Fast forward to today, the pistol should be in N.H. Today or tomorrow. Customer Service wanted to have a look at it. Hopefully it comes back in working order, and I’ll report back on what the fix was. Thanks a bunch for sharing your issues with your firearm.
Almost every round with mine was a failure to feed for the first 100ish shots. After I sent those 100 rounds through like one at a time slowly I would get more and more feeds until the problem went away. Got about 200 more rounds through without issue. Still pretty wary of it though now.
I’m not sure what all this is about. I have over 1500 on my Fuse so far without a single bobble. Ball, a half dozen different types of hollow points including 200 of my carry round, with and without a mounted RDO and with and without a TLR-7 Sub. Strange. Mine’s a keeper.
It’s very simple - some guns arrive without tolerance issues and some have major tolerance issues. There have been people receive Fuses that would malfunction every other round. I’m glad yours worked well out of the box.
Idk man, idc what company makes the gun. I would always torque and loctite (and clean/lube) anything installed from the factory. It's just good due diligence 🤷🏾♂
Do you buy a new car and make sure the tires were installed properly? Do you order pizza then cook it once it arrives? Makes no sense. The product should be ready to go.
Glass in the Romeo X optics is trash. I have both of the original versions. The glass scratches super easy.. That and sig has something going on with their slide to frame fit. Ton of slop between the frame and slide at the front of the gun that gets worse from use.
It's those magazines.. this is why u wait for the 2nd wave of releases for any gun.. they will make changes and the 2nd wave of releases will be pretty good.. Just like the Xmacro.. im getting mine on black Friday this year
@@averagemarksman I was able to run 100 rounds of 115 Remanufactured Callaway ammo through mine before the range closed today. No problems so far. I did lube the shit out of it though.
Every company produces pistols and rifles with issues. The pistol was purchased so I could make my own informed decision. Who makes a better pistol in your opinion?
@@WettDoggTV And was that a good decision considering all the issues with the 320? They took th cheapest bid and got an inferior product. Fanboys will be fanboys. You can both keep buying them, but people with years of experience with sig will make fun of you. A 365 or a 320 is not a 226.
@@JohnnyBFlossinso you’re saying you’re going to make fun of people for buying Sigs but you have years of experience buying and using sigs? Cool sorry.
@@averagemarksman Yes I clearly have more experience with Sig than you do. Used to love their innovation and quality. That has changed drastically over the years. Now they can't even get the finish on their guns right and as you know the reliability and safety is a huge concern. So yeah, if you act like Sig is worth the money, you'll get made fun. S&W, Walther, CZ, FN, HK, and Glock are all making a better full size than Sig
I wouldn't buy anything from Sig Period, but look at the bright side the gun didn't FIRE on its own. So you're ahead of the game in that aspect 😮
I don’t think that I was even able to get 10 rounds through mine. Swapped out the upper with my X Macro, and the Fuse lower/X Macro upper worked just fine. X Macro lower/Fuse upper was FTF, same as the original configuration. Called the shop where I bought and to tell them about it, and how I should go about getting this fixed. Fast forward to today, the pistol should be in N.H. Today or tomorrow. Customer Service wanted to have a look at it. Hopefully it comes back in working order, and I’ll report back on what the fix was. Thanks a bunch for sharing your issues with your firearm.
Thanks for that update. I have had hiccups but nothing compared to that! Let me know how it goes.
@@averagemarksman WIll do, sir!
I have 2 365x's with pmm barrel/comps and that setup runs great i also have a 365xl with a pmm that runs great but this makes me pause on getting this
I think the issues will get worked out with it in time.
Cool place you’re shooting… sucks it happened out of the factory like that. Nice shots! What state you shooting in?
Thanks. We live in Florida.
Just lovely, SIG still using their customers for BETA testers. And on a gun that's not inexpensive at that !
Almost every round with mine was a failure to feed for the first 100ish shots. After I sent those 100 rounds through like one at a time slowly I would get more and more feeds until the problem went away. Got about 200 more rounds through without issue. Still pretty wary of it though now.
That’s insane. I’ll more than likely end up selling this one. It’s not worth the issues to me.
I’m not sure what all this is about. I have over 1500 on my Fuse so far without a single bobble. Ball, a half dozen different types of hollow points including 200 of my carry round, with and without a mounted RDO and with and without a TLR-7 Sub. Strange. Mine’s a keeper.
It’s very simple - some guns arrive without tolerance issues and some have major tolerance issues. There have been people receive Fuses that would malfunction every other round. I’m glad yours worked well out of the box.
I also had the same issues. Mine also is keyholing
I haven’t had that issue yet.
Shitt !! KEYHOLING !?!That's flukkn ridiculous !! SIG needs new managers.
My Glock 48 had 3 failure to feed in the same range session within 50 rounds yesterday
Uh oh, u better be careful, Glock fuckboi's will try to fight u for this comment 😂😂😂
Happens to every manufacture. Sucks though.
Facts. Glocks don’t fail haha
@@positivereactions4044 Yeah bro you should just buy a sig lmao
@@JohnnyBFlossin I have a few sigs
Idk man, idc what company makes the gun. I would always torque and loctite (and clean/lube) anything installed from the factory. It's just good due diligence 🤷🏾♂
Do you buy a new car and make sure the tires were installed properly? Do you order pizza then cook it once it arrives? Makes no sense. The product should be ready to go.
So are you going to sell it and get rid of it now?
I’m holding on to it. Haven’t had any issues.
SIG beta testing continues... That's why all my Sigs are safe queens and range toys.
Safe queens and range toys are an accurate description.
Glass in the Romeo X optics is trash.
I have both of the original versions.
The glass scratches super easy..
That and sig has something going on with their slide to frame fit. Ton of slop between the frame and slide at the front of the gun that gets worse from use.
That’s good to know. I typically stick with rmr’s.
It's those magazines.. this is why u wait for the 2nd wave of releases for any gun.. they will make changes and the 2nd wave of releases will be pretty good.. Just like the Xmacro.. im getting mine on black Friday this year
The flush fitting magazine is no different than the Tacops or x macro magazine. I don’t think that’s the issue.
I know that’s not the issue cause I got failure to feed 3 times with the fuse shooting 34 rounds out of my x macro mags
I like Sig hammer fired pistols, but their strikers are suspect.
It’s a shame. It’s a nice concept of a pistol.
What ammo are you using?
115 grain Fiocchi. It should run in this gun with zero issues.
@@averagemarksman I think I’d send that one back bud. Lol
@@tomalderman7598let’s hope it doesn’t come to that!
@@averagemarksman I was able to run 100 rounds of 115 Remanufactured Callaway ammo through mine before the range closed today. No problems so far. I did lube the shit out of it though.
Thats great news. I think it's going to have to be lubed up pretty good to run.
The only good Sigs are the 226, 229 and 220. The 320 is unsafe, junk.
I’ve had a couple 320’s over the years. I’m not a big fan.
39
?
I dont even need to watch the video to know that sig is trash 😂😂
Every company produces pistols and rifles with issues. The pistol was purchased so I could make my own informed decision. Who makes a better pistol in your opinion?
The United States Military says differently bud
@@WettDoggTV And was that a good decision considering all the issues with the 320? They took th cheapest bid and got an inferior product. Fanboys will be fanboys. You can both keep buying them, but people with years of experience with sig will make fun of you. A 365 or a 320 is not a 226.
@@JohnnyBFlossinso you’re saying you’re going to make fun of people for buying Sigs but you have years of experience buying and using sigs? Cool sorry.
@@averagemarksman Yes I clearly have more experience with Sig than you do. Used to love their innovation and quality. That has changed drastically over the years. Now they can't even get the finish on their guns right and as you know the reliability and safety is a huge concern. So yeah, if you act like Sig is worth the money, you'll get made fun. S&W, Walther, CZ, FN, HK, and Glock are all making a better full size than Sig
This dude doesn’t know what he doesn’t know. Keep that in mind. This dude doesn’t really know what he’s talking about.
100%. Dudes a bum.