Sharpening Spyderco Paramilitary 2 S30V On DMT Diafold 302m Ceramic Stone And Balsa Strops W/Diamond
Вставка
- Опубліковано 23 січ 2020
- In this video I sharpen a Spyderco Paramilitary 2 s30v On DMT diafold coarse / fine, then move to a Spyderco medium 302m ceramic stone and finish on small balsa strops loaded with 5 micron, 2.5 micron and lastly 1 micron mono diamond paste.
DMT Diafold Coarse 45 Microns: 0:44
DMT Diafold Fine 25 Microns: 5:35
Spyderco 302m Medium Ceramic Bench Stone: 8:51
Balsa Strop Loaded with 5 Micron Diamond: 15:25
Balsa Strop Loaded with 2.5 Micron Diamond: 17:05
Balsa Strop Loaded with 1 Micron Diamond: 17:47
#Spyderco #DMT #Sharpening - Навчання та стиль
Simply: Wow. This is truly inspirational. Thank you! - Jonah
Thanks!
Highly informative- thanx
Thanks for watching.
Pretty dang sharp mate
Thanks man, appreciate it.
Perfect
Thanks!
How did your diafold holdup? Wear? I’d like to try dmt but their 6 inch stone is too thin to hand hold, my preference for sharpening, and scrubbing the blade on such a small area makes me wonder how long it will last.
They're actually quite durable, been using them for quite a few years. I recommend using a little soapy water and not too much pressure and they'll last you a long time.
THK diamond paste or Kent’s Diamond paste? They are the same thing. Just different names. That’s the stuff your using though right?
They are the same but made by a large manufacture that also sells it to others, really a decent paste overall and cheap especially if you buy in bulk, you can get large tubs of this stuff.
I’ve always wondered about the bass/balsa grain orientation. End grain or side grain?
I get the balsa in large sheets that are along the grain and cut to size.
I've just recently been experimenting with that. I've noticed end grain giving me
better results, especially with basswood. But: When it's thin (+/- 1/4"); it's brittle, and might snap on you mid-sharpening.
I haven't seen that handle on the DMT sharpener. Is that an older design?
Get these from home depot, it's made by DMT exclusively for them I think.
Got mine at the auto store by the counter
What did you spray on the dmt
Normally use water with few drops dawn dish soap.
I’m on Northwest_Knife_Guy marathon if your wondering why I’m commenting on all of your videos. I’m not trying to spam