This Yamaha Blaster Engine was hanging on by a THREAD! Full Tear Down
Вставка
- Опубліковано 20 гру 2022
- This Yamaha Blaster Engine was hanging on by a THREAD! Full Tear Down
#2stroke #yamaha #build
How much longer do you guys think this engine would have ran before something broke?
PARTS AND TOOLS IN THIS VIDEO - (These links may be affiliate links that I get a kick back for; there is no added cost to you)
Tusk Stand - bit.ly/3WCVVm0
JIS Screw Drivers - amzn.to/3WgdN6F
Milwaukee M12 Impact Drivers - amzn.to/3WCwLUy
Milwaukee M18 Impact Driver - amzn.to/3hJTjE9
Milwaukee Driver Set - amzn.to/3HSrzrC
Exhaust Grommets - ebay.us/Vlv5nP
FMF Header - bit.ly/3WC5guA
FMF Silencer - bit.ly/3HUb6mF
Clutch Holding Tool - bit.ly/3ViSzUh
Flywheel Puller - bit.ly/3G8uqeS
Milwaukee Hackzall - amzn.to/3FNlAlm
Milwaukee Pick Set - amzn.to/3v6F27C
Adobe Photoshop - amzn.to/3Gc5Mdc
Adobe Illustrator - amzn.to/3YEmr0i
Blaster Graphics Template - ebay.us/sgBfd1
SPONSORS/COMPANIES I TRUST
Rocky Mountain ATV MC - bit.ly/32OHs02
Bonehead Performance Coatings - boneheadperformance.com/ (Mention my name and get 10% off)
Rocket Ron - www.rocketronracing.com/
DRW Performance - bit.ly/34dxWEp (Code SABO10 for 10% off)
Urmosi - urmosi.com/
Power Sports Nation - www.powersportsnation.com/
Vito's Performance - www.vitosperformance.com/
MotoBlast - www.njvaporblast.com/
MERCH - michael-sabo.creator-spring.com/
Add me on Instagram @michaelsabo350 for Channel Updates!
Companies and Sponsors please contact: michaelsabo350@gmail.com
I own the license to use any and all music in this video. - Авто та транспорт
How much longer do you guys think this engine would have ran before something broke?
prolly like 20 minutes 😂😂
20 minutes sounds accurate 😂
About an hour to five before seeing the full video.
-By second thought, I'm thinking 10-45 minutes.
2 seconds
That banshee carb was the only reason it ran and with that janky hardware I don't think it would have ran for much longer. My guess is 2 or 3 more rips. By the way I named mine "Finger Blaster" and have the two in the pink one in the stink hand logo on the side of the tank😆
I was day dreaming so hard that I was starting at the thumbnail for like a minute and then realized… OHHH FUCKK ANOTHER VIDEO FROM MIKE LETS FUCKING GOOOO!!! 🔥🔥🔥🔥🔥 AMMPPPEEED YO AMPED!
hahaha love the intensity bro!
I realize this is just a blaster, but for some unknown reason I am fully locked in on this build. In fact I am super pumped on the whole lower performance quad shoot out you’re building these quads for. Amazing job on your videos
I feel the same. I my case is because going all out on a banshee of course is rad, but everybody does it, and the same for top of the line quads, bikes, cars, etc. But modding these kind of quads, those are not so common and I'm eager to future vids and watch how good performance can a blaster give being modded, and pf course see the process.
Awesome feedback from both of you guys; glad to hear you're excited; I am too!
People underestimate a blaster mostly because of the fact most people only get to ride them in their stock form they can be a highly competitive machine if built properly
Mike man seriously thank you. You go the extra mile with everything, weather it’s the edits, the build quality, the little details, or simply putting links in the description for pretty much every product used. Usually weather sponsored or not. That to me says so much…… this is going to be your year dude. These last few builds killed it with views and after that bullshit you had to deal with splitting up with partners, losing friends all of it was all meant to be. They didn’t want to respect your view on things..::: you’ll be well on your way to 2 million this time next year and you deserve it bro
Dude comments like this keep me going. I love making big goals; 2 million would be amazing and nothing short of incredible if by this time next year!
The effort you put into your video editing alone is outstanding! I love that you put links to EVERYTHING that you use, your graphic design is also next level! Have you considered doing graphic kits for customers? I’d be down to support that!
Thank you for the love man! I've been considering offering my designs as purchasable kits possibly with semi-editing, like you can change the words, add your number etc but it's essentially the same design.
@@MichaelSabo That would be awesome man! Hope to see you do a ATC 250R or Tri-Z in the future!!
Everytime I watch your videos I notice more and more how meticulous and non corner cutting your builds go that attention to detail is top tier level stuff and honestly the only way to go because pay for it now and u won't later on down the trail.
Thank you for noticing and saying that. I've learned the hard way that cutting corners usually comes back to bite you down the road (or the next guy)
Theres a reason there called the baby banshee and you can see why because of the similar ways the engine is built and the way its put together and also the older model blaster has that banshee look to it
☝️Dm me on Telegram with the above username I have a surprise for you 🎁
Now I want to get a 2stroke!
Highly recommend!
so glad you changed the color scheme didn’t like the original designs this one loooks badass
Glad you like it man!
26:30 I always use an impact screwdriver. The hammering force keeps the bit from camming out, and supplies a rotational impact to the fastener to loosen it.
I’ve done a bunch of YFZ450s, LTZ 400, Blasters, KX85s and that manual impact screwdriver is a lifesaver! Invaluable tool for anyone working on powersports machines
I do have one of those; I break it out when they really don't want to spin. Good info!
Those clutch screws were wild!
Mad sketchy 👀
Had to be a clutch dump or two away from exploding
@@MichaelSabo I'm glad you caught it in time, best of luck on all your builds
Cant wait to see this one
Dude! In my opinion this is the sharpest build ever. Color combo & graphics are an A+! That brain of yours is impressive. Bravo
The only complaint I have had with the ebay special kits is the wrist pin bearings exploding! Best of luck!
Love these videos about the quads you putting together for this future series stuff. Really enjoying it.
Thanks for all your hard work man, these videos are so awesome to watch, keep it up!
Thank you for the compliment and for watching man!
I think this is one of your more out there designs meanwhile being subtle.
I love how you basic do OEM + builds. I've followed you for a long time, never imagined it would come to this. But one thing for certain is that I enjoy every single video you post man, great job!!
So excited to see how this turns out
Keep these good Videos up Man ,appreciate them.
Great tear down, love the bin explosions. Really pleased you tore this all the way down, pretty cool having all original untouched innards even if the outside bits were mutilated!
Great video Mike as always !!
I’m so thankful to have somebody I can really learn from, you are a beast at what you do. Please keep up the good content.
Best looking color combo and graphics I have seen. Has that same type of style that is popular with the overlanding/truck builds, super cool.
That shifter blowing up caught me off guard, I laughed so hard!
Can't wait to see when it's done I love ur vids u inspired me to fix up my 400ex before I sold it getting a blaster soon.
Glad to hear I inspired you man; good luck in your Blaster search!
súper nice video keep up the good work never fails
Thank you Albert!
Can't wait to see all those parts!!!
What's up Lannie! 🤘
@@MichaelSabo I HOPE YOU AND YOUR FAMILY HAVE A VERY MERRY CHRISTMAS BUD AND THANK YOU FOR ALL THE AWSOME CONTENT!!!
@@lanniewiant8269 merry Christmas to you and your family as well Lannie; thank you for always watching and supporting what I do for so many years.
So excited for this one!!!!
🤘🤘
I always look forward for another video from basket case garage!!
Thank you Jacob!
This build is gonna be awesome! Looks like the 02 color way I love it man cannot wait I think you will have fun with this build! Baby banshee coming on up !!!
Dude I needed this video so bad. Been home sick and been so bored. Cant wait to watch it. Thanks man love the videos
Glad I can brighten your day bro! Get better!
I redid a blaster and all the seals and bearings were great including the swing arm bolt. Testament to Yamaha
I just got a blaster, this is super good for me, thank you
Love this channel. Been rocking with you for some years. Keep it coming.
Thank God I'm early Michael If it wasn't for you I would've never got into race quads I've rebuilt 5 now my favorite so far is my ltz 440 big bore high compression fcr swap thank you for the new hobby best of days to you friend!
This is awesome to hear man; this just made my day! I bet that Z rips!
The graphics on your bikes are awesome!!!!!
Loving these vids.
Awesome video mike, i love how detailed you are during the tear down. Feel like I’m right there with you Can’t wait to see the progress !
☝️Dm me on Telegram with the above username I have a surprise for you 🎁
that hose with the bolt in it is the crankcase vent. people never cease to amaze me. All the hardware store junk blows my mind. I cant stand when people don't use the correct hardware. Glad you are bringing this thing back to life the right way.
I can’t wait to get a blaster, this series motivates me a lot to get one
Good luck in your search man!
I have been waiting for this. I'm so happy
Thank you for watching Damon!
I had a blaster motor puller out and new bottom end seals and top end rebuild and put back in the quad In less then 3 hours
☝️Dm me on Telegram with the above username I have a surprise for you 🎁
Mannn I absolutely love you're videos
I watch a lot of UA-cam. I think you're my favorite youtuber... thanks for the videos and putting so much effort into them. One of my favorite parts are the trash can edits/acting. They make me laugh. Not much on UA-cam is actually funny and your attention to detail and content combined with the humor... it's very well done. Merry Christmas and happy new years!
Looking great man can’t wait to see all the smaller quads stacked up against each other
I'm excited too man!
Always awesome to watch your videos, all the way from South Africa !
Thank you for the love on my videos!
Love these videos!!! Been waiting for days!!❤
I appreciate you waiting!
Just stumbled across your videos. I am in the market for a Yamaha Blaster (I used to have one years ago) to build up. Thanks for creating such great content.
I appreciate you watching man! Good luck with your search and build!
Me , my brother, and my stepbrother have owned many blasters years ago… this brings back so many me memories lol. Good stuff!
Glad I can bring back the memories man!
Looks like it’s going to be a cool build man.
Thanks for following it man!
I like the design! Excited to see the quad take shape!
Thank you!
Very nice work as always. Can’t wait for the next video
Thank you man!
Love the detailed build content. Wish more creators were doing these types of small engine videos. I'd love to see an lt230s build!
Man Sabo you got me reliving the glory days and wanting a sport quad again!! I miss waiting for the next months issue of dirtwheels with qaud vs quad and also the readers rides. Looks like I'm on the hunt to save one myself!! #savesportquads
Great video as always. I literally always look forward to your new videos. Helps me make work go by faster! Time to kill a hour 😎
I appreciate the love Dylan!
This guys videos always make me want to go work in the garage haha
Mate I am in Bed with Bronchitis here in the UK 🇬🇧 and this is the best medicine I can get.
Quality channel mate 👌
Dude it just made my morning that I could make you feel a little better; being sick is the worst. Get better ASAP!
@@MichaelSabo
How long till next video mate?
Another great video, favorite atv/dirt bike building channel on youtube no question.
Thank you man!
Love it Micheal keep it up!
Thank you Bryce!
Love the vids and absolutely love the humor. Being a small engine mechanic myself. There is always more than one way to skin a cat. Keep up the great vids man!!!
Awesome to hear from another mechanic! Thank you for watching my videos!
Love black and gold motorcycles - ie. vintage Ducati, but looks great on a Blaster too. Enjoying the series so far. Nice job.
Thank you man, glad you're enjoying the series!
Awesome tear down can't belive how new the inside of the crank case is. The graphics look amazing! Love your videos always exited for the next one to be released watching all the way from England 🏴 keep up the good work Mike
Greetings from the US! Thank you for the love on my videos man!
The cut in the piston is for higher rpm because of more exhaust duration
Lmaoo u throwing away stuff is soo funny the timing and effects r it😂😂
Dibs on the FMF exhaust. 😜
Looks awesome!
Thank you!
Decals are bad ass man
Quality of videos is outstanding!
Thank you for the feedback on that!
Mike I’m so stoked you’re doing a blaster build!! Hey when you go all out after quad wars I’ve got a 3mil Vito’s crank and an HPM billet flywheel cover that’s been polished if you’re interested. I sold my blaster and the parts are just sitting, would love to see them put to good use! Keep crushin it!!! 💪🏼
Another freshy Mike nice 👍
Man i love your videos. I am trying to get hand on blaster myself but I am watching you all the way from Czech Republic 😅 so it’s kinda hard to find a good piece. I hope you will never end with this cause it really helps with learning how each machine works and comes together🔥
Great video
Love ur vids mike inspired me last year too flip bikes and my first one was a blaster keep up the good work 👍❤️
That's awesome man; thank you for the love on my videos, I'm glad I could inspire you!
Always a great video from Mike, the attention to detail in everything, editing, building, disassembly, best channel out there to see the right way to make something look better than new! btw Mike, I work in chino CA, 😂😂
Haha that's crazy, go tell these guys to stop selling Chinese pistons with Wiseco on them 😂 Thank you for the love on my videos man!
It's a little shocking when people say a 2-stroke 19 year old engine is crazy, my blaster is a 1988 model and still runs very nicely, all stock and straight out of the factory. It's probably the oldest gift my father handed down to me
I love it Mike
Excited for the blaster build. Was my first quad, killing it Mike 🔥
Thank you bro!
gonna be sick!
🤘🤘
Always enjoy watching your videos. Not a fan of the color scheme but it's your bike and I'm sure it will come out great.
I got a 2006 blaster, modified intake exhaust and transfer ports, +2 rear axle, +3 a-arm extender kit, toomy exhaust, boyseen carbon reeds, weisco piston and rings, pro-taper bars, Douglas alloy rims, ebc brake pads, k&n filter, tusk grab bar/nerfs/bumper.
Lovely Channel dude, I really like it. Keep up the good work!
Thank you for the love on my videos man!
Mike you always have awesome color combinations and outstanding graphics!!👍🏻
I appreciate that man; thank you 🤘
After your done with this I want to buy it. You are the only one who builds things correctly.
I appreciate that man! There are plenty of other great mechanics and builders out there; but yes I agree it can be hard finding them.
Use white diamond polish on plastic I bet they will look like new after it works great on almost anything.
I'm going to check it out; thank you man!
Digital camo graphics with the black/gold/white color scheme lookin real sharp! Lookin forward to seeing the Blaster come back to life brotha.
Thank you for the feedback man!
Oh man! Finnaly another Sabo Video!
🤘🤘
You got this blaster just in time. It wouldn't of survived unscathed for much longer. 👍
☝️Dm me on Telegram with the above username I have a surprise for you 🎁
Cool build
Makes me miss my old Blaster, had one I think of this same year with a CPI In frame drag pipe along with a k&n filter with a drilled airbox and the oil box delete. Thing ran like a scalded dog and I had no problem keeping up with some fairly big stock bikes if I really rode it hard. Ran up in Winchester Bay Oregon a lot and loved Banshee hill up there so much but that was years ago.
Making me want to find a cheap Blaster to rebuild and maybe do a 240 kit in.
Another brilliant video i could watch this for hours , how that quad didn't fall apart with all those miss match bolts is so lucky 🙈 , neat trick with the mini impact to crack those screws . Love the graphics looks sick 👌
Thank you for the love on my video Mark!
Great work! Always enjoy watching your uploads! Like the graphic and color combo. Happy holidays 👍 👍
Thank you Blake, happy holidays to you as well!
Great video!
Thank you!
Nice vid as always. You show basic shop skills anyone can learn. Good job. FYI, my son and I just finished a 250R build. Yes, I used all the Dave Moore videos 😂.
Graphics are awesome!
Glad you like them man!
Hey man love your vids from Australia am a dirtbike rider but love your builds love itan 🥳🥳🥳
Hell yea man; glad you enjoy the build!
I retract my previous statement of not needing rebuilt😂 you the man Sabo, I will never question you again!
Hahaha, dude I've been wrong plenty of times!
Doesn't seem like such a li'll ole engine could cause so much enjoyment ! Merry Chtistmas & Happy New Year ! ☮PEACE ☮
thank you for the video, hello from france
Greetings from the US; thank you for watching!
Another great video mike🤘🏻
Thank you bro!
Nice!
That Quad looks 🔥..
Glad you like it Shawn!