Це відео не доступне.
Перепрошуємо.
How to Replace Window Regulator 00-04 Ford Focus
Вставка
- Опубліковано 11 лип 2019
- In the video, 1A Auto shows how to replace a broken, seized, or stuck window regulator. The video is applicable to the 00, 01, 02, 03, 04, Ford Focus.
🔧 List of tools used:
• Phillips Head Screwdriver 1aau.to/o2d/1AX...
• 10mm Socket 1aau.to/oKa/1AX...
• 8mm Socket 1aau.to/oKa/1AX...
• Trim Tool Set 1aau.to/oks/1AX...
• T15 Torx Driver 1aau.to/onB/1AX...
• Ratchet 1aau.to/o3w/1AX...
• Painter's Tape
For More Info visit us at 1aau.to/h/bJf/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
So many videos out there purporting to show this repair/installation but yours, hands down, is the best! Thank you for posting it.
Thanks, I just replaced my window regulator in my 2000 Focus Wagen. It took a few hours, but it wasn't the easiest of work environments trying to change the regulator on a busy NYC street.
READ FIRST!!! This video was 99% AMAZING and 1% overlook. Only problem I had was that at the 5:27 he pulls the Door Panel off and it pops the Door Handle off along with it. Mine did not do this and I did in fact end up breaking a clip off. However it appears to be functioning just as good. Did it in 1.5 hours after I got off work at midnight. These videos are so helpful! Thank you very much!
he did get really lucky with that door lever just coming right off. I used a plastic pry tool to pry from BEHIND the circle clip in the center of the door lever and it comes right out. Had to do it 3 times in fact because I forgot the order in which things go back together!
thank you for this video! i know it's over a few years old but it helped me fix my window today. my older neighbor stopped to tell me how handy i was and i showed her this video. she was impressed, said "you really can find anything online!"
the guy is a legend love the way he works
Excellent job shows exactly what you need to do.
Perfect description, everything you need to know and nothing you dont
I just did my drivers side... Thanks for the excellent video!
+Chris Kellas Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Use an old credit card as a scraper to separate the vapor barrier. Excellent video. Thanks
Done today, thanks this done step by step, never done it. Replaced whole unit including motor same as shown.
My watershield was heavey glued was most work to not destroy it. Helped me a lot! Thanks Ed
I just did my Driver Side Ford Focus 2001 today with the help of this video, Thanks!
+Loco Shinobi Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
Thanks 1A for your help in replacing my Focus frt dvr side regulator
Thanks for sharing.. managed to change regulator easily
Great video tutorial! Thanks for sharing.
Thank you for the positive feedback and for watching! +Patriot / Kenneth Burlingham
Excellent video. I used it to replace my regulator. The window comes out pretty easy, so I didn't tape mine up. I just pulled it out through the top.
Thank you for doing these videos.
Thanks you so much. It was just as you did. Thanks
Great video mate. Any advice if the window is currently all the way up and cannot lower it to loosen the clamp bolts holding the glass?
Did you find a solution to lower it? I have the same issue, my window is all the way up.
use a combination of extensions and u-joints on the end of a ratchet to get a bit or socket up to those bolts, that's the only way. small hands/arms help
Try combination or open end or box end wrenches, or whatever tools you have that will loosen the bolts, remember the bolts don't have to come all the way out, they just have to loosen enough to get the clamps on the glass open enough so you can pull the regulator & cables down enough to start maneuvering the regulator out the big hole near the bottom of the door. Once you get the old regulator out, you can re-position the glass with tape again so you can get the clamps good and snug through the larger holes farther down the metal inside door panel. Don't over-tighten and crack the glass!
Plastic putty scraper from Walmart or local tub and tile/paintstore....could work in place of that blue scrapper...
I'm going to have a Ford focus soon and this type of window problem has happened before in I think it was a Buick we had. But learning how to fix the car myself and always is my goal.
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +Sara Wilcker
great video, thanks a lot
Great video.
Do y'all have a video on how to do a manual regulator? Crank came off in my hand lol
Thanks!
What is the part number for the scraper you used at 8:30?
What I have to do if the window is all the way up and the switch isn't working, how can I lower the window manually?
14:47 I'm trying to put a window in my focus, and this piece is broken on my regulator. The metal part seems okay, but the plastic part is broken, and won't mount to the shaft. Can I replace this one section, or am I stuck paying for an entire regulator?
My passenger window will go up and down no prob from the drivers side door but not on the passenger side door
+@kieranst6155 We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
My driver side window wont move up or down but i hear the motor spinning. What could be wrong with it? Focus 1.8 tdci 2002
+vgbh G We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
My window is not moving. How can i know if it is the window switch or a window regulator?
Use a multimeter for the switch.
Great job on the video…unfortunately not a lot of emphasis on the difficulty of actually manipulating the motor out of the space…and it being almost impossible to do without the spool and cable coming out of the transmission. Once that happens, you’re done! I ended up having to replace the whole regulator with the motor purchased as one part and that was far easier and quicker without the risk of everything falling apart! Good video otherwise though!
Your videos focus on the fronts, but the problems occur mostly on the rear windows.
+Ed Korotasz Thanks for the feedback!