Hi! Thank you for the video, friend :) I check for the latest version of the software and I found QPS5555N_II_Setup_3.00, (instead QPS5555N_II_Setup_2.03) It's a type error in your video information or just a different update in Oct 2024? Thank you so much again!
Good stuff! Have you gotten roger beep 7 and 8 to work? I played around for hours and 7 and 8 don't appear on the radio menu at all. Max on radio shows 6. I even made the most basic roger tune, uploaded and no option for 7&8
I have the QT60, which is the Radioddity version of this radio. I also have the programming cable from Radioddity, but there is nothing on the Radioddity site for the QT60. Is the Anytone software the same?
They have software for it on there website. Go to support then radioaddity then others then choose QT60 and 💥 software download with manual download will pop-up. 73.
So if I buy the radio I would have to buy the computer cable separately. Correct! With CB channels is it plug and play or is the software required to use as a CB 11 meters
check one of my first videos. you have to convert to the cb. easy. Cable is sold separately, not regular USB cable. Has to be cable specifically for this radio. I would encourage you to go and buy Radioaddity QT-60, it's the same radio different company with better warranty terms in USA. Get from a good source if you want radio untouched. If your mind is set to buy one my good friend Scott's Radios sells them. Check his UA-cam channel. You can buy from other sources if you like just make sure the radio wasn't open and returned, lot of them are messed up by people and returned back to stock. Major pain in ........... 73
regular cable as far as I know won't work and I saw some comments somewhere that may cause some issues, you need to get a programming cable for that radio made by any company. As far as I know programming cable has some kind of circuitry embedded in it to make radio and PC work together. If someone knows more and reads this please explain and advise.
A "standard" mini USB to USB A does not have any circuitry, just a straight run. The REAL programming cable does have a communication chip circuit that provides data transfer with the proper protocol. I bought the 16 dollar ASIN B01N7OFAT5 and it DOES work great....
Your saying if you mess up the software in the radio from the PC, you can then do a reset from the radio to bring it back to factory settings? I would like to see that in your next video.
I was talking about a factory reset. If I change channels, freq, Roger beeps etc with software from PC I can go to the radio menu and do a factory reset, that's what I was referring to. Radio has that option. I think it is under menu#23 then you press All. If you mess with the engineering menu and you like to reset that then there is no option like that. Let me know if I understood the question. 73.
www.anytone.net/download. try above website, find your model and download it. I see they change the web little bit so the software is either at page one or page three.for 5555N II. let me know if you got it to work. 73
kept getting the Windows doesnt recognize.. turned out to be the wrong cable for my radio!! got the correct cable, plugged it in and windows recognized, turned on radio and no problems, reading and writing! and the wrong cable is what they sent with the radio....
😳. Good to know that the radio is still good. I was always wondering what would happen if the wrong cable was plugged into the radio. Glad you got the software running. Thanks for sharing. 73
Hi! Thank you for the video, friend :) I check for the latest version of the software and I found QPS5555N_II_Setup_3.00, (instead QPS5555N_II_Setup_2.03) It's a type error in your video information or just a different update in Oct 2024? Thank you so much again!
What is the name light under radio
Good stuff! Have you gotten roger beep 7 and 8 to work? I played around for hours and 7 and 8 don't appear on the radio menu at all. Max on radio shows 6. I even made the most basic roger tune, uploaded and no option for 7&8
Never tried but if radio has only 6 options then I think that's all we can get.
Hi can you send me the Drive website for the anytone 55555n 2
Getting the cable tomorrow. Thanks very much for this information.
👍,73
I have the QT60, which is the Radioddity version of this radio. I also have the programming cable from Radioddity, but there is nothing on the Radioddity site for the QT60. Is the Anytone software the same?
They have software for it on there website. Go to support then radioaddity then others then choose QT60 and 💥 software download with manual download will pop-up. 73.
So if I buy the radio I would have to buy the computer cable separately. Correct! With CB channels is it plug and play or is the software required to use as a CB 11 meters
check one of my first videos. you have to convert to the
cb. easy. Cable is sold separately, not regular USB cable. Has to be cable specifically for this radio. I would encourage you to go and buy Radioaddity QT-60, it's the same radio different company with better warranty terms in USA. Get from a good source if you want radio untouched. If your mind is set to buy one my good friend Scott's Radios sells them. Check his UA-cam channel. You can buy from other sources if you like just make sure the radio wasn't open and returned, lot of them are messed up by people and returned back to stock. Major pain in ........... 73
I have this radio stopped tx out of no where could this problem be firmware issue? Tried different microphone still no tx 🤔🤔
Not sure what to tell you. Should work with original microphone. Mine working fine over a year already, no issues.
Thanks for sharing!
Are you saying that if you use a regular cable, something happens to the radio? does it have to be original cable?
regular cable as far as I know won't work and I saw some comments somewhere that may cause some issues, you need to get a programming cable for that radio made by any company. As far as I know programming cable has some kind of circuitry embedded in it to make radio and PC work together. If someone knows more and reads this please explain and advise.
A "standard" mini USB to USB A does not have any circuitry, just a straight run. The REAL programming cable does have a communication chip circuit that provides data transfer with the proper protocol. I bought the 16 dollar ASIN B01N7OFAT5 and it DOES work great....
Is the Anytone 5555N ii the same as the QT60 ?
Anytone 5555 N II same as Radioaddity QT60. My buddy sales them. check his channel and store Scott's Radios . 73
exacatactly the same
Your saying if you mess up the software in the radio from the PC, you can then do a reset from the radio to bring it back to factory settings? I would like to see that in your next video.
I was talking about a factory reset. If I change channels, freq, Roger beeps etc with software from PC I can go to the radio menu and do a factory reset, that's what I was referring to. Radio has that option. I think it is under menu#23 then you press All. If you mess with the engineering menu and you like to reset that then there is no option like that. Let me know if I understood the question. 73.
Hi can you send me the programming software for the anytone 55555n 11 pls
www.anytone.net/download. try above website, find your model and download it. I see they change the web little bit so the software is either at page one or page three.for 5555N II. let me know if you got it to work. 73
Hi did get the programming software for the anytone 55555n thx
Hi I got the programming software thx you
73
That station in Melbourne is about 20km from me. Great conditions!
Nice. You guys are coming strong late night to States.
@@myszaca its a bit quieter now, but I am standing-by on 27.365 if you want to try. 73
@@mostlypostie1 I can here Australia but cant make it somehow, I am at 36
@@myszaca hahaha that was so cool! de 43PIG140
well that was cool skip, will post video soon. Nice to talk to you over the air. 73
kept getting the Windows doesnt recognize.. turned out to be the wrong cable for my radio!! got the correct cable, plugged it in and windows recognized, turned on radio and no problems, reading and writing! and the wrong cable is what they sent with the radio....
😳. Good to know that the radio is still good. I was always wondering what would happen if the wrong cable was plugged into the radio. Glad you got the software running. Thanks for sharing. 73
Pity the weather channels cant be changed.....
why would i need the software i use for its purpose 10 meters legally here in the usa
You can use it for 10 meters if you like. That's what is designed for by the factory. Most radios have it to program the frequency etc on the PC. 73
@myszaca you can always clip the white wire inside and more the jumper diod over and it goes to 27mhz
Buscando o conhecimento foco na missão bazuka Foz do Iguaçu PR Brazil 🇧🇷🇧🇷