I cannot express how thankful I am for this video. Of course I decided to twist some corners on an already solved 2x2. Then a corner came off, and I tried to fix it, but could not. I didn't want to disassemble the entire thing so I just tried to do the last layer. I was able to fix it, but the turning was all over the place. I finally caved in and disassembled it. I was weary about it working if I did manage to reassemble it, and after a few failed attempts (which were my fault), I finally fixed it! Thanks so much, it even turns nicer than before!
thank you so much, my 2x2 popped out of no where and when I somehow assembled it, it was turning SO MUCH WORSE, with your video I managed to take it apart again and assamble it again and it works just like it was before. thank you.
I actually was able to take the piece off without taking out the screws, but I had to pull the piece apart, and had to take out all the screws anyway to clean the cube lol. But I really like how you mentioned to beware of losing pieces.i did a couple turns before tightening down my cube today, and it literally exploded 🤣 🤦♂️ but luckily no peices were lost in the process.
Lol rip cube. Regarding why I said you should take out the screw, it’s because to set it up you take it out anyway but even if I wasn’t trying to set it up I would still take out the screw to make it easier. :)
I did it with my brother. I did it but its we noticed a piece was broken rip 30 bucks cube and I almost can do EG 1 And EG 2 and so on The broken piece was also the reason why i wanted to take it apart and put it back together. But the piece was broken since the beginning Anyways thanks for the tutorial
My YuXin little magic v2 has a very weird corner and since I disassembled it completely I can’t put the core piece back. I tried putting it first but that piece is very weird because I can’t have this piece in the cube without removing some edges. Can you help me?
@@leeleecuber I know but the piece is like that it is not made for the cube since if you try to put the edges to see their contact there is no part that they seem to do so. Maybe I’ll have to get a new 2x2. Who knows. Thank you for your response !
@@spystoudios if it was like that originally and you didn’t put a different cubes piece in it then it belongs in that cube. Maybe try loosening the cube then trying again. U might be having a problem just assembling the last piece which is very common.
I did it! It was just the fact that I had to put the edges in a very specific way but yeah it works fine but it turns horribly so I will still buy a new cube but thank you !
My 2x2 was not in shape for years and now I assembled it 😊 This is my luckiest summer vacation ever 😅 I got me 2x2 back to normal a new gear cube as a gift from my uncle and mirror blocks given by my father
I have 3 pieces with the locking tabs. I watched your video many times, and cant figure out where you placed them. Please advise. My cube is locked due to misplacement. Thanks
You see all of your followers comments and react to them or answer their questions. Your one of the only youtubers i know who does that. Good support to all your fans and followers. 👍👍👍
My cube has been saved thank you I really don’t know how I got the main piece out when I was trying to put my cube back together I was concerned about it not turning right you have saved me thank you 🙏🏾 😊
Thank you so much I really needed this and I had no idea how to solve this the pieces kicked on getting jammed and I didn’t know what to do and then I seen your video so thank you so much for helping me
hey thanks for the vid Uhm i was done assembling it and it keeps like popping in the inside when i turn the cube (like after 20 seconds)of putting it down it just keeps popping in the inside like it keeps dislocating the Edges can you please explain why?
Thank you soo much, tofay was my 7th day cubing and I wabted to corner twist cos I was bored, but then the whole cube decintegrated, I was going to buy a new 2x2 but I thought, how about lets just google how to assemble it back, this was the first video, and yes when he tells you to cover the doors and stuff DO IT I dropped a peice, and searched my room for 15 mins and did not find it, I was getting annoyed so I went to get some water, as soon as I stepped out of my room I saw the peice😂. I would recommend you to assemble it in a box ect. But thanks you so much you saved me a few bucks
Thanks, bro! It's been a while since my 2x2 was broken, and the first corner pieces... well, I was about to cut the thingy on them... fortunately, tough, I didn't! Thank you very much!
I can't fix my last piece and i fixed it but then cube is not working as before it is strucked. Tell a solution for this. I tried loosing tha screws but it didn't work 😢.
Hi, my cube is weipo wrs. Thanks for the video . I can't place the last corner piece. When i try to place it, second layer is popped. I tried to place edge pieces, but at this cube, i can't place edge pieces. Can you help? I'll edit this comment if i did it. Edit: i placed the edges but i can't place the last corner. Second edit : i placed the pieces but when i turn the cube i am having a click sound and cube was so slow
@leeleecuber I can't put the last corner like you. It can happen from my placing method. I placed last 2 corners without any edge, and then I am placing the last edge by loosing and stretching it.And i am having this problem. If when I try to put it like you the edges are popping out.
My 2x2 center has these cut out like a line at the side and there is 3 pieces the has a line of plastic and it's locked in to the line and when I turn 1 axis can't turn (my grammar is bad and I don't know the much words)
I have the same thing and what he means is like there is some lines going in the center pieces of the base and there are peices that have a little line going out of it and if you put the piece there then it locks and won't move
tip: if u cant get the last corner piece in take out the thing that separates them put the 2 corners in together and then push them in opposite directions and put in the piece again.
@@leeleecuber hmmm i think like you send me a Ao5 so i can make a vedio on that adding yours and mine and you can add mines to yours and make a vedio can we?
Is it just me or are yj screws sooooo fragile? If you unscrew your Yj cube too much, the hole in your screwhead where you put the screwdriver, that hole will start to erode. The screws in my mgc elite2 are almost eroded to the point where I can’t unscrew them out, so I’m probably going to order some spare screws from scs since it’s cheap there.
@@leeleecuber ah its ok it as an rs2m evolution whitch is 10 bucks so its not a big deal. The big deal is that i compete in 2 weeks so lets hope my new one arrives on time
I cannot express how thankful I am for this video.
Of course I decided to twist some corners on an already solved 2x2. Then a corner came off, and I tried to fix it, but could not. I didn't want to disassemble the entire thing so I just tried to do the last layer. I was able to fix it, but the turning was all over the place. I finally caved in and disassembled it. I was weary about it working if I did manage to reassemble it, and after a few failed attempts (which were my fault), I finally fixed it! Thanks so much, it even turns nicer than before!
Thank you for your support! I’m glad I could help :)
thank you so much, my 2x2 popped out of no where and when I somehow assembled it, it was turning SO MUCH WORSE, with your video I managed to take it apart again and assamble it again and it works just like it was before. thank you.
Jhlgjhkvhjfkhjfkjhfkhjkfhkjfhjfkjhfkhjfkkhjffjgkgjkfjkgf
I actually was able to take the piece off without taking out the screws, but I had to pull the piece apart, and had to take out all the screws anyway to clean the cube lol. But I really like how you mentioned to beware of losing pieces.i did a couple turns before tightening down my cube today, and it literally exploded 🤣 🤦♂️ but luckily no peices were lost in the process.
Lol rip cube. Regarding why I said you should take out the screw, it’s because to set it up you take it out anyway but even if I wasn’t trying to set it up I would still take out the screw to make it easier. :)
Right, I figured that out the hard way 😆 or should I say, the hardware way! LOL
@@tjzero0008 LOL :)
lol smae
😅@@leeleecuber
I dont know if i can do it . The first piece i put in always aglines wrong or wierd with the cube
Keep trying and following the vid, you’ll get it.
Ok thanks
I did it with my brother.
I did it but its we noticed a piece was broken rip 30 bucks cube and
I almost can do EG 1 And EG 2 and so on
The broken piece was also the reason why i wanted to take it apart and put it back together.
But the piece was broken since the beginning
Anyways thanks for the tutorial
Thanks i spended 1hour on fixing by my self but tjis helped a lot
Your welcome I’m glad I could help
Thx bro i wad just fidgeting with my 2x2 then it popped out for some reason. Really helped 👍
That u so much my cube was fully broken and yiu helped thanks
glad i helped :)
My YuXin little magic v2 has a very weird corner and since I disassembled it completely I can’t put the core piece back. I tried putting it first but that piece is very weird because I can’t have this piece in the cube without removing some edges. Can you help me?
You’re either putting it in wrong, or the piece is broken. Kind of ur call you’re gunna have to figure it out.
@@leeleecuber I know but the piece is like that it is not made for the cube since if you try to put the edges to see their contact there is no part that they seem to do so. Maybe I’ll have to get a new 2x2. Who knows. Thank you for your response !
@@spystoudios if it was like that originally and you didn’t put a different cubes piece in it then it belongs in that cube. Maybe try loosening the cube then trying again. U might be having a problem just assembling the last piece which is very common.
I did it! It was just the fact that I had to put the edges in a very specific way but yeah it works fine but it turns horribly so I will still buy a new cube but thank you !
Can u tell me what specific way since I can’t put the last piece in since it has these weird parts on it that blocks it from going in
thanks man hahahh 2x2 is just like a puzzle when assembling it after cleaning but its fun after i know this
My 2x2 was not in shape for years and now I assembled it 😊 This is my luckiest summer vacation ever 😅 I got me 2x2 back to normal a new gear cube as a gift from my uncle and mirror blocks given by my father
Nice bro
Idk what cube your using but I’m using a gan. One of the pieces are slightly sticking out and I don’t know how to fix it.
u might wanna look at some pictures of ur cube disassembled because i don't have it and unfortunately can not help with that.
I only have 2 pieces in and I can’t put the things that don’t make it leave in 2:30
I don’t really understand ur problem but if ur missing pieces ur cooked
does this work on all 2x2 rubix cube ?
I have 3 pieces with the locking tabs. I watched your video many times, and cant figure out where you placed them. Please advise. My cube is locked due to misplacement. Thanks
There will be holes underneath the centers that they need to slide in. And if your cube is locked you can just take it apart again:) hope that helps
@@holoholevictim7876 sorry I don’t understand your question
@@leeleecuber CAN YOU PLEASE MAKE A VID
You see all of your followers comments and react to them or answer their questions. Your one of the only youtubers i know who does that. Good support to all your fans and followers. 👍👍👍
Thank you
so how many center cornerd are there? my 2x2 had 3 centers
Yes there should be 3 that’s what I showed in the video
My cube has been saved thank you I really don’t know how I got the main piece out when I was trying to put my cube back together I was concerned about it not turning right you have saved me thank you 🙏🏾 😊
No problem
Thank you so much I really needed this and I had no idea how to solve this the pieces kicked on getting jammed and I didn’t know what to do and then I seen your video so thank you so much for helping me
No problem
I got everything but the last corner piece, the edges keep inverting inwards
U can loosen it a bit :)
hey thanks for the vid Uhm i was done assembling it and it keeps like popping in the inside when i turn the cube (like after 20 seconds)of putting it down it just keeps popping in the inside like it keeps dislocating the Edges can you please explain why?
U probably assembled it wrong, check all the edges
I did everything that is on your vid and the side of the cube keeps like getting jammed like it's lifting the bottom edge piece how do I fix that
Thank you. My 9 year old son broke his 2x2 and as usual, it's "Mommy can you fix this?" So you're my hero today, Lee.
Fun fact -In hindi leelee means take my
Thank you soo much, tofay was my 7th day cubing and I wabted to corner twist cos I was bored, but then the whole cube decintegrated, I was going to buy a new 2x2 but I thought, how about lets just google how to assemble it back, this was the first video, and yes when he tells you to cover the doors and stuff DO IT I dropped a peice, and searched my room for 15 mins and did not find it, I was getting annoyed so I went to get some water, as soon as I stepped out of my room I saw the peice😂. I would recommend you to assemble it in a box ect. But thanks you so much you saved me a few bucks
Glad I could help!
Before it was harded to assembled my cube but after watch this vidioe I assembled it easily.Thank you! This vidioe is important❤️🔥😊
Glad I could help :)
My one all the corners can be removed??
yes all the corners can be removed however it is easier to take out one of the centers and just put it back on :D
@@leeleecuber nooo without taking any spings or others out
@@speedcuberwithnicevedios hmm
@@leeleecuber really
@@speedcuberwithnicevedios hmmmmmmm
Thanks, bro! It's been a while since my 2x2 was broken, and the first corner pieces... well, I was about to cut the thingy on them... fortunately, tough, I didn't! Thank you very much!
You’re welcome:)
I can't asemble the last corner
Loosen the cube a bit :)
can any edge be placed in the original place?
No, there are 3 edges with specific differences from the other edges, those 3 are meant to be the originals.
Thanks, this is harder than solving an actual 2x2 lol
I can't fix my last piece and i fixed it but then cube is not working as before it is strucked. Tell a solution for this. I tried loosing tha screws but it didn't work 😢.
Please explain your problem more clearly
Yo can u make a vid on how to fix a mirror cube pls
I don’t have one so idk about that
That voice tho. Bro sounds like Darth Vader. 💀
lmao
Funny
What cube is this called
Yjmgc
thanks I had to superglue one of my pieces and this guide helped me fix it after I pulled it out
Glad I could help :)
One edge fell out and I thought that you would put an edge in last. It helped.
Glad I could help :)
Blabla
Bcggg
Assembling a 2 by 2 is harder than assembling a 3 by 3 for me
It’s pretty much the same difficulty but if it is it is understandable:)
Yes
@@KTCEditzz indeed
bro thank you so much when it popped i thought i was gonna have to get a new one🙏
Ur welcome:)
What happened to mine is when i fixed it, it won't turn up it can turn the bottom and top but not turn up , front and back
Check all the edges again you probably made a mistake
My only 2x2 popped and this really helped! Thanks🙏
I’m glad I could help bro :)
When I reassembles it, it was stiff as, just loosened it and added springs
Nice
Hi, my cube is weipo wrs. Thanks for the video . I can't place the last corner piece. When i try to place it, second layer is popped. I tried to place edge pieces, but at this cube, i can't place edge pieces. Can you help? I'll edit this comment if i did it. Edit: i placed the edges but i can't place the last corner. Second edit : i placed the pieces but when i turn the cube i am having a click sound and cube was so slow
If the cube is slow that’s likely an indication that you messed up assembling the edges.
@@leeleecuber i gonna try it
I did it And it was better. Just 1 edge is feeeling slow
@@ALIMCUBER_TR either a manufacturing error, or u put it in wrong, or it’s not lubed
@leeleecuber I can't put the last corner like you. It can happen from my placing method. I placed last 2 corners without any edge, and then I am placing the last edge by loosing and stretching it.And i am having this problem. If when I try to put it like you the edges are popping out.
Im stuck on the cube assembly i have two black things left
?
My rubiks brand cube broke and I tried assembling it but the last corner wouldn't budge
Rip :(
Same
Tensioning evenly is the hardest part lmao
Yes! You fixed my cube for me! Thank you!!
No problem
My 2x2 center has these cut out like a line at the side and there is 3 pieces the has a line of plastic and it's locked in to the line and when I turn 1 axis can't turn (my grammar is bad and I don't know the much words)
ur gunna have to explain ur problem a bit better
I have the same thing and what he means is like there is some lines going in the center pieces of the base and there are peices that have a little line going out of it and if you put the piece there then it locks and won't move
So please make another video If you can
To make the exact cube specific it's the nex cube 2x2
@@AyanKhan-vx9ot in some cubes there are 3 centers that the original Pieces must be placed and matched between for it to work if that’s what u mean
tip: if u cant get the last corner piece in take out the thing that separates them put the 2 corners in together and then push them in opposite directions and put in the piece again.
2 by 2 avg?
Like sub 5 :)
@@leeleecuber wow can we battle?
Lol
@@speedcuberwithnicevedios idk how we would do that:)
@@leeleecuber hmmm i think like you send me a Ao5 so i can make a vedio on that adding yours and
mine and you can add mines to yours and make a vedio can we?
Thank you so much I thought I was never going to get mine back together
Yw :)
my cube keeps popping and i just cant get the last piece :{ and I just got it today
.😭
Dw, tighten it at the end and have patience:)
I have a problem where the bottom layer can turn but the others wont, like theres something blocking it from turning. Can someone please help me? 😭
U probably assembled the cube wrong, re do the whole thing
Mine is a nex cube i tried assembling it but it literally the whole frame broke into 100 pieces 😢
I hurt my thumb.
You’ll get it just keep trying :)
Thank you so much for this video! I needed it!
No problem
why do i have 3 of the wierd edges
U put them between 3 centers with the starting corner in the middle
Oh ok thank you it worked 😀😀😀
@@haoyihor264 np :)
Thanks bro this helped a lot bcuz I fully disassembled to change the color scheme
nOO WHY!?!?! Why change the Color scheme…..
@@leeleecuber I’m sorry it just feels right with a different color scheme
@@forsy_reborn nOoo
@@leeleecuber I’m sorry
@@forsy_reborn :(
:( the ball inside the cube just keeps truning when i turn a piece and wont stayin place pls help 😭
I don’t know what ball you are talking about bro u need to specify
Nvm bro I just put the fixed pieces in the wrong place
@@migsplayz472 lol
Lol
thanks leelee buddy
Last step - push agressively - cube is now broken!
Sounds like a skill issue
I can’t put the last piece in becuz the Yukon corner has this weird piece that blocks it from going in
Maybe it’s too tight
*Yuxin
Is it just me or are yj screws sooooo fragile? If you unscrew your Yj cube too much, the hole in your screwhead where you put the screwdriver, that hole will start to erode. The screws in my mgc elite2 are almost eroded to the point where I can’t unscrew them out, so I’m probably going to order some spare screws from scs since it’s cheap there.
Idk man mine are fine maybe u got a defect in urs. I hope u get it fixed :)
bruh this literally happened with my yj mgc 4x4
@@elementballs dang rip cube :(
I forgot to tell you but it has happened to my Mgc square-1 and now the screw is stuck in my square-1 forever :(
@@Seweyy23 sad :( I will be unboxing that cube actually soon. I ordered it on June 19 on pre order. Still out of stock :(
Sir mine all edges are ssmr
?
I was watching this video with earphones so the first thing I notice is the voice quality is satisfying
Thanks, glad u liked it :)
Help i cant put the last piece
Try loosening
The original piece leg literally snapped and i spent almost 2 hours to make it into cube shape, it turns NOTHING like it used to, im sad but im tired
If it snapped it’s broken and your going to have to get a new cube unfortunately
TYSM❤❤❤ I fixed my 2x2!!!
somehow my 2x2 had no original center peice and i was able to take all the peices out easily.🤔🤔🤔
Huh weird
Thank you sm i was trying to fix it but it was weird and kept breaking again ty so much
No problem:)
Mera rubick cube kuch aalg he me use kese solve kru uske h peice black colour ke he or bo muse kese jodne he pta nhi chal rha he
So much agreement
@@leeleecuber ye cube mene messho se order kiya tha
Ye uska link he
Please muse btao ki me 2x2 Rubicks cube ko kese jodu
Bro I’m never gonna be able to fix mine it’s only one piece have not had it for 30 minutes and my brother broke it
I’m sorry to hear that, if u get a replacement piece make sure before you put it in you loosen the cube :)
@@leeleecuber well I order it on Amazon so it came with nothing I’ve been trying forever nothing worked
@@leeleecuber found the problem. He took a PIECE off, not a part of the cube that’s why. So I’m guessing it’s un fixable
@@landofchugs2980 nice
At 1:08 I took it out without loosening
Good for you
At 4:24 I can’t put it in
Loosen the cube
@@leeleecuberhow?
@@Lazx-official with the screws
Do 1x1 next
4:15 Instructions unclear, my Rubik's cube is now shattered. also there's a hammer stuck inside my floor
💀
@@leeleecuber do you have a tutorial on how to assemble the pieces back together? 🙃
Thank u so much man it helped a lot
Glad it helped
Tengo LAS Uñas cortas no puedo romper
If only I understood
Thank you very very much. I thought i will be sad forever :)
your welcome :)
At the end i forgot to tight the screws
Then do it lol
I've been struggling with assembling a 0.000000001x0.000000001 Rubik's cube, could you make a tutorial on how to?
U just eat it :)
@@leeleecuber 😂
@@cubingwithsoyaib261 lol :)
@@leeleecuber bro iam still laughing i don't know why 😂😂😂🤣🤣🤣🤣🤣
@@cubingwithsoyaib261 lolllll
assemble 1x1 cube next
Fr
I finally fixed a cube that friend just bought it and broke it 😀😀
Nice
Putting in the edges almost breaks my hands.
Lock in
I know a nxn cube that you cant show an assembly tutorial on....
A 0x0 cube
I will now be proving you wrong. :)
Lol
@@gabrielbowman1267 lol indeed
The last corner required me a chopstick to asemble it
Lol nice
next assemble a 0.1x0.1 Rubik's cube
no :D
@@leeleecuberpls
@@Pixegonal lmao
@@leeleecuberD:
@@Nadinfamily-j4m never
😭 I cant do step one and My cube cost 100 dollars.. 😭😭
Nah you can u gotta keep with it man Dw u will get it.
it did not work
😭
why not just do it
@ huh
@Sethsstuff jsut do it
I tried to do it and I broke it bruh
Rip
Thanks my cube broke open and i could not fix i by myself❤
np gald i could help :)
Tge last piece stem broke while i was trying to put it back in 🙃
Rip :(
@@leeleecuber ah its ok it as an rs2m evolution whitch is 10 bucks so its not a big deal. The big deal is that i compete in 2 weeks so lets hope my new one arrives on time
@@ΓΙΆΝΝΗΣΤΣΕΡΩΝΗΣ-υ1ψ hopefully
Thanks 😊
Glad I could help :)
My dad is going to kill me
That’s not good
Bro just kidding i am not dead
You are very useful
You made me alive
*Bro thanks it help me😇*
Np glad I helped :)
I still can’t figure out how to put the last one in I’m so frustrated
Make sure it’s loose :)
Actually I did it right my mom said she would punish me but when i searched i did it🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉its
My that last piece got offffffff😢
Aaaahhhhhhhaa
The last piece is very hard
Yes
Are you sponsered?
Can i sponser you?
lol
@@speedcuberwithnicevedios lol I’m not sponsored :)
@@leeleecuber ok :)
But you are gonna get
Sooooooooooon...
@@speedcuberwithnicevedios I mean, I wouldn’t know :)
@@leeleecuber yeah i know you don't know
bros been vaping since 1999
I haven’t touched a vape or cigarette in my life
Min did not work
It takes patience:)
Nice voice bro