Complete Beginner's Assembly Guide for 2x2 Cubes

This video is a 100% complete beginner's guide for 2x2 Cube assembly. Broken down as much as possible to make sure even the most novice cubers (and some handy non-cubers) can put together their popped 2x2.
TheCubicle - www.thecubicle...
Music: Joakim Karud - Dreams

[@stephanied1919]

Out of all the tutorials this kid is sooo smart he is the only one that fixed my cube.Good job now please add my comment to your next video.I subscribed.liked.shared Excellent job. Every time I need to resemble my cube I will watch you 👍

[@catakuri6678]

When you realize that solving a 2x2 is easier than assembling it

[@theindianspeedcuber5339]

lmao

[@masterboots8890]

Alli

[@janesha6778]

Real

[@mulqitsani]

Real

[@skelabones8153]

Dude, I think I died when my 2x2 poped.
You are a life saver.

[@mokshivlogs281]

i tryed many tutorials but your is the one of a kind. i like your vids alot

[@zeragon7]

Bro you saved me. Finally getting into 2x2 seriously and I had a Valk 2 sitting in my drawer from a few years back that had mis-aligned. I honestly had thought it broke or something, but after following this video, it's properly aligned again and now I can use it! :)

[@SuperUTubeLogin]

Thank you so much. This is the only reason we didn't just throw ours out. You are a life saver.

[@sab1528]

Thank you man, this was a very easy tutorial and it helped me to reassemble my 2x2 which I thought a piece was broken bc I didn’t know about hooked edges. A tip I have is that for my yj yupo v2 M the last step of inserting the very last edge was too hard so what u can try if that’s the case is to insert 1 corner, then the edge, then the very last corner which worked for me after loosening. Thanks for the great video and keep it up man!❤

[@trake3159]

Very helpful. My cube broke and I fixed it thanks to this tutorial.

[@M3ko2]

I remember having the trouble of assembling a friend's Ångström Valk 2M, I didn't want to wipe the lube off while assembling, but although some did happen, I still got to get it together 😂
This one deffo will help, thanks for getting it out in the midst of quarantine! ♥️🙏

[@zacharykai6317]

this is quite possibly the most helpful video on the internet, thanks so much

[@Napoleon69420]

OMG TYSM my cube popped and i tried assembling it but it never worked, this video saved me having a to buy a new 2x2, thank you so much for this video!!

[@jeremybalagot8780]

TYSM I TRIED SO MANY VIDS AND URS IS THE BEST
IM SO HAPPY :D

[@siddharthst2712]

Thank you so much ! I had already assembled it once but i had gotten the sides stuck since i didn't know there were hook edge pieces and normal edge pieces , its working now again , thanks once again

[@cosmonautcy5187]

pov: you thought that assembling a 2x2 would be easier

[@BadShoot372]

yoo thank you so much bro you are the best its a 8 min video but i learned too much ty again

[@murodbektemurov9870]

Thanks so much bro 🇺🇸
Katta rahmat 🇺🇿

[@galou4308]

Well that was harder than I thought
Thanks for the very clear tutorial

[@mysticpickle4564]

Thank you so much, all this time my 2x2 was locking up and not turning. liked and subscribed.

[@lionellthesman3060]

Putting the hook pieces to the notch center is the worse

[@themikeandike13]

I know

[@gamingutkarsh6428]

Yeah it took me 45 min to do all 3

[@sixhundered]

Thanks cuh. Now I can go back to solving my 2x2

[@nunezfam4ever]

Thank u! I finally assembled my 2x2 and solve it again! I better be subscribing in ur channel!

[@xyreljazelacanilao7504]

Thx so much man man 2x2 would turn that well this fix it thx

[@TacoDKing1119]

TYSM I REALLY NEEDED THIS

[@zaaaccccc]

OMG THX FOR THIS VIDEO I THOUGHT I NEEDED A NEW RUBIX CUBE

[@Holy_aro]

Thank you so much and keep the contact up

[@andbenn]

Wow, wish I found this six hours ago. Perfect! Got my YJ Yupo back together. Key was notch pieces surrounding a single piece. Ahhh. And Jules from The Cubicle! Bonus!

[@Teneab]

i also got MY YJ Yupo back together

[@thaiisfood]

I just realized that you are Jules from the Cubicle after watching your noodles video

[@jethromondugar8569]

THANK YOU SO MUCH I FIXED MINE!!!

[@tawhidibnasojib354]

You are a bast cuber Thanks

[@hellshaked6530]

My cube fell apart because I was curious about what the inside looked like and loosened the screws

[@lighteditz4473]

Thinks bro❤❤

[@james-8280]

Thank you

[@faridainamdar1679]

thank you bro

[@sayangharami9326]

Thanks bro love you bro

[@luisfelipecastillo-olivare2232]

THANKS BRO I THOUT THAT I WOULD NEVER PRACTICE AGAIN 2X2

[@colling8709]

I brought my MF2S to school someone broke it and I had trouble reassembling it this video really helped thank you
But my cube feels a little weird and all of my edge pieces had a tiny notch on one side and I did not know which way those went so I put them in randomly

[@romanondreicka4087]

Wow your such a good man u saved my life i nearly lost my 25 dollar 2x2

[@sunrisexsky6633]

Best tutorial thanks

[@dallaskibberacing]

Thanks!

[@cubesandoldstuff]

Good stuff

[@migo.8]

i did it but there one piece that i did not put and i dont know where it goes but the thing is..... the cube is perfect

[@SidharthShivnath]

Can you do a tutorial for how to assemble a 2x2 with a hooked corner? I have the Yuxin Little Magic and I can't figure out how to assemble it

[@HHh-tr4bd]

i like the vid btw

[@VarunAadhithan]

Bro thanks

[@subbaraosubbarao4263]

Tq sm bro ❣️❣️❣️

[@gamingutkarsh6428]

Thanks a lot bro

[@Syed-ze1sv]

Thx

[@readersfan]

Thank you!!!!!!!!!!!!!!!!!!!!m

[@ReddingDoesEverything]

TYSMMMMMMMMMMMMMMMMM

[@unnamedself4845]

When your little brother wants to play with your cubes that's what happened to mine

[@thememefrog3113]

It worked but for some reason it makes really loud notices and feels like it's gonna pop of

[@Lucasthecuber-h2n]

When i popped my 2x2, i assembled the corners and broke again
so the edge peice (pillar) is diffrent to say. So i used a tutorial to
assembled

[@HHh-tr4bd]

yo dude my roxenda 2x2 my brother got all in it and took the entire thing apart i need helpbuilding the core just the core right now

[@flipmlhighlights]

Why my 2x2 so hard to move so many lockups

[@papepo6429]

This is like trying to solve the 2 x 2

[@galacticcuber2058]

um, for some reason on my qiyi ms, i didnt put the last edge piece in, because it has notches, and i dont see nothec on any center, and it turns just fine

[@PizzaSlices2000]

POV: you check your cube for magnets

[@galacticcuber2058]

what do i do if the permanent corner piece comes out? i have a qiyi ms

[@romanondreicka4087]

Wow thank you so much

[@joshwilliams5835]

An upload :O

[@danik0011]

Your edges are tall and thin, while my edges are wide and short. Question:
¿HOW TF DO I INSERT THE LAST ONE-

[@mitanshpatel6764]

THANK YOU SO MUCH I THOUGHT MY DAD WAS GONNA KILL ME IF HE FOUND OUT THAT MY 2X2 WAS BROKEN,

[@denzelnomore]

i overly agressive turning and... this happened.
1 piece just popped out.

[@trilen5088]

No I was too confident I can build it back 😅

[@masterboots8890]

It took me i week todo thes bruh

[@SixtyNime]

trying to hot glue my broken corner xD

[@Goofyahhuncleproduction]

The t3x3 was easy

[@estherkim3103]

Pls moyu 2×2 qi di

[@estherkim3103]

I can't assemble it

[@amvmaster77]

Poda punda mavane