Try bypassing the kill switch, remove the black wire going from the coil to the kill switch and try again. This got it sparking again for me, had exactly the same issue
Make sure you’re getting 12volts at the voltage regulator on the red wire ! If not that then remove wire from circuit at cdi that grounds out ignition. This will bypass all kill switches that shut down the ignition circuit
Hey man I had this exact same problem on my 97 Xplorer 500. My issue was the stator. Threw a cheap eBay one in and it sparked like crazy and hasn’t had a problem since.
I had tried 3 different plugs just apparently it didn’t make it in the video 😅. It wasn’t 0 spark, so the likely cause is something electrical not the plug.
Try bypassing the kill switch, remove the black wire going from the coil to the kill switch and try again. This got it sparking again for me, had exactly the same issue
Man you’ve been uploading a lot lately! Love it!
Thank you for watching!
Working on chasing my dream of doing it full time, I truly appreciate your support!
Make sure you’re getting 12volts at the voltage regulator on the red wire ! If not that then remove wire from circuit at cdi that grounds out ignition. This will bypass all kill switches that shut down the ignition circuit
Thanks for the tip! I’ll give it a shot!
This is what I came here to say.
I came to say the same thing , also check the thumb throttle they have a cut off in the switch
Dam yall bet me too it, I've had a couple of 335 and one never gave me any electrical issues only carburetor issues and the other just the opposite.
@@johnb3240that would be something to consider once you remove the black ignition ground out wire at cdi , but you’re going in the right direction
Hey man I had this exact same problem on my 97 Xplorer 500. My issue was the stator. Threw a cheap eBay one in and it sparked like crazy and hasn’t had a problem since.
It unfortunately already has a new stator on it. Did the same thing before and after
I believe you will get it going.you gotta fix someone elses"Well lets just say its not running now.. No worries you will find the problem.🍀😄
Sad you couldn't get it running! That's a weird problem to have!
It really is a weird one to have!
I had a similar problem, turned out to be the throttle shut off, gotta be somewhere in that jumble
I did give that a try but didn’t seem to do anything
Bad CDI ??
I tried 2 different ones and that didn’t seem to work… both could be bad tho
Was the Polaris run in salt water? It's very hard on metal's, wiring etc
I don’t know the full story on it. But that’s definitely very possible unfortunately
Its bizzare problem is its a polaris aka JUNK 😂
Can’t say I disagree haha
Holy hell. No spark and you dont put a new plug in it? Change the spark plug and go from there.
I had tried 3 different plugs just apparently it didn’t make it in the video 😅. It wasn’t 0 spark, so the likely cause is something electrical not the plug.
Is the bizarre problem the owner? I bet it's the owner.