Is the Coleman B200 Mini bike faster with a Juggernaut ?
Вставка
- Опубліковано 15 бер 2024
- Is the Coleman B200 Mini bike faster with a Juggernaut?
Installed a juggernaut driver on the 196-powered Colman B200 mini bike.
Tested the bike for 0 to 30 and top speed.
212 Ghost kart racing engine playlist - • 212 Ghost VS 206 Brigg...
Mega moto e-bike playlist - • Raced the QS120 e-bike...
Predator 224 playlist - • Predator 224 gets a 26...
Mega moto performance playlist - • Mega Moto 80/105 unbox...
Bonanza minibike playlist - • 1.3 ratio rockers vers...
Coleman cc100x Predator 212 playlist - • Free Predator 212 perf...
Road rebel go kart playlist - • Kart vs scare chair / ...
Coleman cc100x/DB003 minibike micro bike playlist - • Will a Trumpet exhaust...
Coleman cc100x playlist - • Coleman CC100x Minibik...
Doodlebug playlist - • Is the Doodlebug minib...
Coleman CT200U-EX playlist - • Coleman CT200U EX mini...
Azusa minibike playlist - • Is a Ghost faster with...
Coleman CT200U playlist - • Coleman CT200U minibik...
Predator /Tillotson playlist - • Free Predator 212 perf...
Minibike playlist - • Mega Moto 212 goes 60 ...
Subscribe for more minibike content: ua-cam.com/users/Black66fea...
Instagram - Doubledown555Black66
Don't forget to leave a comment to let me know if you enjoyed this video! :)
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so. The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Keep building that 196. I have one one on my bt200x that will get me going to around 60 and I'm 200 pounds. I made it a 2 seater and I know it will go 50 with me and my wife both on it, not saying that is something anybody should be doing but that 196 hauls. They're not just boat anchors. Great video as usual 👍
Thanks! I like the Bt200x . Check out the video coming this Wednesday on this bike.
This bike is making me consider having my Mega Moto powder coated red eventually.
Best series yet, thanks!
Thanks for watching!
@@Black66you should put a smaller sprocket in the rear if you have one that will fit. The b200r that I have went around 50 top speed with the stock carb, governor, rod and flywheel. I just took the chain driven jackshaft off and put a straight chain to the 50 tooth rear sprocket while keeping the original 10 tooth clutch. Love the vids!
I really enjoy your videos, I’ve watched most of them, some of them several times. I’d like to see a tachometer on your top speed runs. RPM data is valuable when making decisions on sprocket selection.
will you ever get into big blocks like the 301/420 or 440 duromax could be far in the future but just asking
sickk ! 🔥
Please do a video on the B100!
Interesting stuff
Great series of mods. Thanks.
B100 next
Try adding some thin washers to the roller assemblies in the Juggernaut with the goal of reducing the engagement 2-300 rpms. This should allow the Juggernaut to shift into a higher range on the top speed run. Might need to go back to the 50 tooth to make up for the lower engagement rpms on the 0-30, but the wider operating range on the Juggernaut might improve performance.
I have added a juggernaut tuner kit on one of the bikes.Its in the CT200U-EX playlist. In the video coming out Wednesday the bike does much better with the Juggernaut because of the internal engine mods and the added RPM potential of the engine. It really picks up on the top end. A lot of the combos on the bikes only stay that way for a short time and then I switch it out for something else just for fun to see what will happen. Thanks for watching the videos! ua-cam.com/video/TRW-5IaOIGY/v-deo.html
Wonder if you ran some VP racing 94 octane in it if you could gain more speed out of it ?
oh thats a sweet little ride. i have a b200 as well. for the life of me i cant find the proper belt part number for it. would you have any suggestions?
Will a torque converter kit work with the jackshaft setup? Just picked one of these bikes up and cant find much info about it🤔
You need to remove the jackshaft to install the torque converter. Check out the B200 playlist for the torque converter set up. ua-cam.com/video/jjtfBiuCFOM/v-deo.html
What app do you use to track you times? Also, just picked up a B200 based on your videos!
I use a Dragy performance meter for 0 to 30 and digiHUD on the phone for top speed.
Ya kno I got my kp mini on the way but man I still wanna get my hands on that b200 rsv frame and swingarm 💪🏼💯💨💨💨💨 good flex up
Video coming out on the RSV soon!
@Black66 can't wait boss and it's black too
@@Spacecruizer203Yes, camo and black
@Black66 that's fire I'm def gonna get a fresh one ✨️
@Black66 you think a wildcat will be a good match up or tilly 265
Where can I get a 42 rear sprocket for the b200
Compare a pwk28 and a 33mm mikuni pumper carb
will it go any faster if I have everything just stock with a torque converter plus the Juggernaut ?
Check out the B200 playlist for this bike mildly modded with a juggernaut. ua-cam.com/video/pfwWWwAWSgM/v-deo.html
What’s all the mods you’ve done to this bike? Need a list.
Check out the B200 playlist for all the mods on this bike ua-cam.com/video/jjtfBiuCFOM/v-deo.html
I love the video’s but what setup is your fastest
Thanks! The QS138 electric bike or the 263 GTS bike are the fastest so far. . I haven't put out the speed run on the GTS bike yet.
Nothing wrong with them 196's. Cant wait to see a stage 4 build... You know you want too🤣🤣🤣 Any tips on building a vintage Briggs 5hp?
Check out the billet build on this bike . The video comes out Wednesday . Yes, I have a 5 hp I'll do some videos on sooner or later. We used to race the 5hp Briggs on karts back in the day.
@@Black66 Sounds good. Appreciate it.
You say only external mods and immediately say you got inside and removed the governor 🤔
I would say internal mods and governor removal are two different things. Internal mods would be billet rod, cam etc.
Idk what’s wrong with mine I took gov out put 26 pound springs and vm22 carb and put a juggernaut converter on it and it goes 40 mph
I think its gearing on this bike. Check out the B200 playlist for the entire 196 engine build. ua-cam.com/video/9Tk-t17M-ww/v-deo.html
@@Black66 speed isn’t great and the torque isn’t knock ur socks off or even close to a wheelie. It’s got the 50 tooth whatever comes stock on them. I’m thinking about trying a 60 for off roading and some sit you back torq if it will do it haha. My straight chain bikes have more off the line then this one
Can you do a 223 wildcat build?
Yes, I would like to.
Would it be soon or what?
Do you prefer straight chain or tourqe converter?
I like straight chain for the small tire bikes and a torque converter for the big bikes. Its hard on the clutch with the tall tires on the big bikes,especially if you are a heavier rider.
Timing advance key is another external mod
be curious to see how many degrees actually help and how much hurt on these stock cam engines.
Yes, true but I am gonna skip ahead and do the build. The video comes out Wednesday the 20th.
Anyone ever slap a good head on a stock motor? Just curious 🤔
I have a few GX160 videos. Check out the playlist.