What would electricity look like without following NEC (National Electrical Code) standards?
Вставка
- Опубліковано 26 сер 2024
- Discover a different perspective on electrical systems without adhering to NEC (National Electrical Code) standards. Explore alternative approaches to wiring, discussing their safety, efficiency, and innovation implications. See how diverging from NEC guidelines can reshape electrical installations, offering insights into challenges and potential advantages of alternative methods. Whether you're an electrician, engineer, or curious about electrical standards, this exploration will broaden your understanding of managing and deploying electricity.
As a Canadian Electrician, i love the cleanliness of the install and how easy I would be to repair these installs however I can say that the main reason we avoid this method of installation is that each plug and light having its own dedicated path to the circuit breaker panel is extremely expensive.
The smallest breakers we can use in a residential installation is 15Amps as required by the NEC / CEC as such the wires we pull minimum size must be 14 AWG.
However this allows us to create MWBC (Multi-Wire branch circuits) or Edison Circuits which massively saves on the required amount of copper.
Also our building standards are much different, Our high-rise buildings tend to only have concrete walls between units, all interior walls are either wood frame or steel frame which allows us to run wire behind drywall (before its installed) and the ceilings would have a small gap above them for wires and plumbing to be ran before drywall would also be installed.
Both methods have their reasons for existing and both have their drawbacks.
All that conduit looks like it takes some time to install + the time to pull each individual circuit where in north America I can wire a small 6 office floor in a few days. but it can be a pain to add or renovate, especially if the client wants to avoid damaging the drywall for new installations.
I understand we now can use a 10A breaker (and smaller wire) here in the US.
@@steveurbach3093 It may be allowed (I'm not sure on that) but you wouldn't really want to because with the exception of maybe an isolated circuit that only hanndles LED lighting, it's gonna blow the minute anyone puts any real amps through it. The reason most small appliances in the US cap out at 1800 watts is because that will pull about 12.5 Amps at 120 volts. You try putting a standard 1800 watt microwave on a 10 amp circuit and you're blowing it every time.
@@steveurbach3093Much to the pain of people who actually run appliances in their house and end up redoing their house electrical themselves. 😐
But these instruments are cheaper in India and Asia so cost is comparatively less but for Canada or west indeed its costly affair.
As an American Electrician. None of this shit is allowed. Piss off. Everything this guy does is wrong.
5:53 - guess the structural engineer agreed to chiseling out the corner of the concrete beam? 🧐
What if it was already broken
@@Brickwall4769 haven't been much to constrictions, right? ;)
@@Brickwall4769 at the exact spot, with the needed cut angle… right :)
@@tamaskovats frfr
Yeah stuff your stability.
'without following NEC" Proceed to draw a summoning circle on the ceiling.
Next video: "Why I got 666 missed calls from NECA."
Great worksmanship as always! Thanks for the amazing installation work!
thanks
Master electrician, 40 years, really don’t see anything wrong, work was executed in a workmen like manner, regardless of lack of NEC ; codes & technical specifications worldwide are very similar and based on NEC. Grounding, Wire protection, flame spread, physical protection of conductors, only problem I saw was with damaging that beam.
"codes & technical specifications worldwide ... based on NEC" - No. Not in Europe. Not in Russia. Not in countries that were former colonies of European countries.
"Master" electrician XD There's no such thing
@@xaerothehero in Poland we have MAASTER ELECTRICIAN
@@xaerothehero Yes there is here in Canada, in this province they are also able to inspect and pass their work.
In the UK we use metal containment like basket or tray. The cables are then secured using metal braces if above head.
The reason:
A few years back, there was a fire on a construction site. The fireman entered into the building to tackle the fire. It got so Hot that the plastic cable ties (tie wraps) and plastic conduit melted, and the cables fell on to the fireman. He then got tangled up in the copper wires and eventually died from the fire.
It was an apartment building, the wires were retrofitted coaxial cable, and you are correct about the outcome.
As an European Engineer we avoid this because it's cheaper and faster to lay down the cables on a tray
And yet we pay infamous prices, noting beats quality ❤
It’s closer to IEC standards, especially the circuit breaker box. Conduit is commonly used in many countries, for example Australia. Less common in Europe due to the additional cost. As long as the wire gauges and circuit breakers are of the correct size, I do not see how the installation in the video would violate the NEC or any IEC based electrical code.
There are various details that may be required in some countries such as the sizing of junction boxes or exclusive use of UL listed components, but in general this electrician is delivering a system that is commendable and looks safe as well as easy to maintain.
It makes U.S. Electrical Systems look like the 4th world country
America as whole😂
maybe only residential, but Conduit and wire systems like this are used everywhere in US commercial and Industrial spaces. this method is not substantially different from American conduit systems save for the breaker panel, which I gotta say, American breaker panels are better than these.
The see more benefits using the split 240V/120V phase system. But i do agree the U.S residential panels look like a mess.
No it doesn't.
@@nhitc6832no they don’t? If following the NEC, they aren’t supposed to look like messes. You guys are nuts to think that US isn’t superior in our codes. Follow the codes properly, not only do you have save, hidden, and more clean looking electrical installations. Not sure what type Electicians you guys are, but I take serious pride in all my jobs and my stuff looks fucking mint.
Hello, as a German "Elektromeister" , I see many problems here. I don't know if you are familiar with the 'DIN VDE'. It precisely regulates how electrical installations should look and the technical requirements they must meet. I claim that, although we might not build as aesthetically pleasing in Germany, our electrical installations are technically much safer than those here.
What’s in this case less save compared to a installation according to VDE?
Would something just like the conduit work be possible in Germany? I thinks it’s a beautiful work and it allows for easy repairs and adjustment compared to putting cables into the wall without conduit.
@@maxmustermann9858 DIN 18015-3 specifies installation zones as an example. This ensures that no cables are accidentally drilled into, as all cables and lines are laid in specified zones. This means that other tradesmen always know where cables are laid and where they are not. This is completely disregarded, for example. Without good documentation, there is a high risk that someone will accidentally drill into a cable at some point.
The only real "bad" aspect of this install is jamming loads of cables into one terminal, copper bus bars are much more effective, better connections, faster install time and less space taken up in the enclosure. Bunching lots of small cables in one terminal can lead to uneven tightness in the connection
@@cal5566 same concerns, is that terminal "12:00" really capable of handling that many cables?
in my opinion a DIN distribution block would be a perfect addition for this situation.
Germany, Where they plaster cables without pipe into walls...
I would hire him for my home in a heartbeat! This installation exceeds NEC standards so in theory it would definitely pass inspection in the US.
Very nice work, though NEC guidelines are less for people like this and more for those that do a crappy job.
The electrical system is installed so artfully; it's beautiful.
thanks
When comparing NEC against a 220/240 Volt system out of the NEC code area it is important to keep in mind the voltage difference. A 120 Volt (NEC) installation will require the dobbed amount of copper to be comparable to a 220/240 Volt system that deliver the same wattage to the end-user, that fact alone makes a NEC installation much more expensive as the 220/240 Volt.
I enjoy your videos , I might not agree with and like the way a lot of the stuff is done and find some stuff just not practical BUT I do appreciate you showing us the way other countries do electrical .
Thanks a lot
After watching this video the tenants understood why all dead spirits appear from the ceiling lights
There would be no reason to pipe a closed loop for all 5 boxes in the circle. When you go to wire it, one of those conduit chases will be left empty. Looks good like that but not practical. Very nice work
After making the plaster ceiling, those 5 boxes will have 5 light bulbs.
He's just making a demon trap sigil. Sam and Deam would approve.
As senior electrician in Kenya and east Africa, i recommend this system 🎉 brilliant.
thanks
Thank here in kenya everbody is electrician. They do dirty and dangerous connection
@@georgendigawhat do you use for electrical installations in Kenya?
@@JeffPenaify Let me guess: Whatever you can get your hands on for cheap. Just like many other places in this world.
US isnt world's centre. Every country has its own standards for all kinds of things, electrical wiring included. US has a grid-to-resident supply of 110v. Some countries have 220v. Also, I see that power sockets in US households don't have a dedicated switch beside them. I personally find that to be dangerous, especially because whenever you plug in something that draws a lot of electricity (like a toaster, heat gun, refrigerator etc...), it sparks when you plug them in. I get that you have breakers as a safety measure but as someone who grew up in a country where we have dedicated switches next to each power outlet, I find this to be much safer and reassuring.
US has grid-to resident supply of 240v with a split phase neutral used to provide two legs of 120v for common outlets and fixtures while maintaining 240v to higher-demand items like stoves.
Degree in electronics and spent 35 years in the field and never heard this before
Now you know, congratulations
I worked in telecommunications and never saw anything other than metal conduit and boxes used in all our facilities. There are reasons for this.
The installation in houses in the Netherlands is similar. The difference is that all pipes are embedded in concrete. Pipes and boxes are placed on special formworks before pouring concrete.
4:12 when you trying to make an electrical installation but end up summoning a demon
Oh don't think too much, I just need 5 equal points on the circle
If people talk about something this minute to critique how clean you do it. They have never seen any switchbox out in the field. That simple
I just want to easily add 15amp fused sockets and relocate 220 for my pressure washer without dealing with horrible garbage made by people who don't care 😐
4:55 never leave your safety squints at home guys!
Very nice work,! Love watching you work your craft!! I just wish the US would adopt the metric system. It would make life a whole lot easier! 🤠
thanks, I wish your wish could come true
The measurement system doesn't matter. The measurements aren't any more or less useful in any system. This is a silly comment.
@@Sauvenil The metric system is ten times faster and easier. It's OK, your not the first apprentice to try to sound like an adult. 😄
@@christopherhayden7422 "ten times faster and easier" is a lie people like to tell. Almost like it's bragging, when it's not actually that way: it ISN'T any faster than imperial, and "easier" you have to prove in every situation to prove it true.
6 feet is basically 2m, so it's not like you are just working with ones and tens and scaling back and forth, and you still need basic math to do anything human-sized. If someone decided that ~6ft (average sized man) was 1 meter, THEN it would probably be easier. But they had to pick a relatively arbitrary size and call it a meter. (Yes, I know why the meter is the size it is.)
No, it's usually just a way for arrogant people to attempt to say they're better.
@@Sauvenil metric is by far easier , stop defending the undefendable.
OSHA’s mind blown😂😂. It all looks great. Live from New York. A lot of Romax used now. Torn down a lot of BX cable throughout the years.
Best tip I see here is the bucket for loose cable rolls. Looks very nice but is very space and time inefficient in my opinion.
Please make more in depth electrical installation videos. I wanna see everything. ❤❤
5:42
Why do we, as structural engineers, always say that the concrete cover is so important? Structural bars must always be covered if it is exposed (how is rust produced? Water + oxygen = rust - Because it is exposed, it becomes easier). Thus, the structure has weakened and is unable to perform the function for which it was designed.
I do not criticize the worker's work, I'm just discussing structurally
Tho I am not familiar with the electrical code there, I give him full props for Aesthetics and neatness 😀
Most people are not realizing that all of this work will get skim-coated in place by plaster or cement, and will not be visible when completed. Hat tip to this guy for clean workmanship, using the standards that are applicable in his country. (also noted, his knowledge of geometry on the fly to swing a 72° arc to get five evenly spaced pendant light backboxes....r x 1.1754 for those at home) If he was in the States, he would most likely be a licensed electrician, trained to standards that are in effect here. The standards set forth where he is are just as comprehensive, and just as rigorously enforced - if not more so.
I think it is cool to see how the rest of the world does their wiring practices. There are a lot of aspects here in the States that are way behind the rest of the world (DIN rail and equipment inside residential panels - what the rest of the world calls a 'consumer panel'? yes please.)
Quality Assurred.
what a change from 25 years ago !!👍
Excellent workmanship I was just wondering how long a installation like this would take and the cost. Nice bit of over torque with the power driver.
I have a pic on my phone from a house here in Texas in the US..
All the ceiling lights and wall recepticles were ran off one fuse, all of them were connected together in the ceiling, in a big knot, in the open, not mounted or in a box.. on top of insulation.. with wire cap connections.
2 bedroom, 1 n 1/2 bathrooms. Laundry room. Living room, kitchen, front porch..
7 lights.
4 wall recepticles
All ran to one spot, and all bound together with wire caps off the breaker line..
Caps on caps on caps.
Pairing up n capping em.
After all connected..
They folded n balled up the string of wiring..
And set it on the livin room insulation.
Its the size of a cantaloupe.
The best part..
They installed a plate over the breaker so it wouldnt kick off due to over draw of power.
It was the metal plating off the back of a desktop computer where your ports stick out the back of the case.
Screwed to the fuse panel box.
No wonder it was deemed for demolition
N yes. In the walls n all after removing the drywall..
Alot of the wires sheathing had melted off.
Total fire hazard if the walls would of had any kind of insulation in them..
I mean still was anyways
Damn i love America.
Hahahahaha
as far as running conduit, no this is not substantially different from the US. The materials and exact specifications might differ slightly, but as far as running wire in conduit, its basically the same any US installation which uses conduit.
The only real point of difference is the breaker box, which i have to say, American breaker boxes are much better than that style of box, far easier and less labor intensive to install, since American breaker panels use bussbars to supply all the breakers, this makes it more flexible and safer.
Now dont get me wrong, I'm not saying the American system is better in every way, our system does have its problems in other area's, but as far as breaker panels go, American ones (this includes canada and mexico), are better that other standards.
I understand, thank you for giving me more knowledge. Actually in America the quality is much better. I'm sure about that. I looked into NEC. It is very good and safe for users
I think the UK buss to branch system beat those wires (the breakers are similar. Both beat the US residential as the Mains side is bolted.
They do make DIN bussbars that can simply a lot of what you see in the video, gotta pay more though. We just never really adopted DIN specifications for power distribution in the US. Honestly, I kind of like DIN compared to standard breakers in the US, for the modularity. You can build a box to basically any size for a set of rails.
As I recall the poster stated this was an "Emerging Country", (interput this as 3rd world country), so any discussion about not conforming to NEC, EU, Canadian code does NOT apply.
And making it easier/cheaper for the Contractor does NOT mean it is good/better as code is just doing the bare minimum. I for one don't want "bare minimum" in any of my buildings.
whatever about the NEC guidelines - did they just break out a chunk of the concrete to radius the tubing ?
maybe
Hello there. I just to tell you that I admire your work. It is like art...!!
It's very simple: after a couple years of use, count the number of "crispy critters". If it remains at zero, then the installation is safe.
I just love how clean this is
as an American electrician everybody saying how neat it all is...don't get me wrong its nice but I'm trying to figure out the breakers/wire color coding(neutrals, hots, grounds, etc.) and how many phases if it even has phases. I loved the video and I'm curious if they get paid by the hour, by the work done and what the scheduling is like cause that's probably time consuming
I get paid according to the bidding package.
If I am not mistaken in the area where we live this kind of PVC is not allowed especially when you exposed the installation. Because PVC are weak against impact. Minimum requirement are IMC not EMT. Also this kind of installation makes the slab or walls become weak. Why not just run a cable tray instead of those long pipes. Cable trays can be more economical as it can fit different sizes of wires.
U do know dat this will be all cowerd up right.. Plaster, cement or drywall behind witch is filled whit isolation
Don't really see any violations. Maybe more than 360° on conduit runs. I do alot of this same type on installs in motor control cabinets using tray cable. The 2" hole in the j-box was concerning.
Can you tell me how you make your wire so perfectly straight like a straight line?
A laser ruler will do that and especially follow the drawings
Maybe it's just the kind of wire is just more stiff
@@Brickwall4769 makes sense, the wires that I use are usually all wiggly and wobbly they never fully become straight like that
@@ketanpadal9833you have to pull it through something like a tight handgrip, a small pipe,...that straightens the wire out - every electrician should know that trick, works very well
@@ketanpadal9833thick stranded wires will behave differntly difficult to pull also.
Everyone uses multiple thin stranded wires except few countries.
These guys have pride in their work. Its Amazing
Ny boss would agree with this work. It’s very clean. Can I ask since it is not using NEC, are they using IEC standards?
Oh, it is following IEC standard
@@CIFYou Then you can tell us which IEC standards that was in play here, there is a lot of them and they are in many sub variants, not all places use the newest variant (they do not have to), now and then these sub variants differ a lot, some are a total rewriting others are just a small adjustment here and there. Local code determinate what IEC to follow and what sub variant to use too.
@@K2teknik.In that case, you may refer to specific regulation. To tell everything here, akin to opening a textbook and throw everything here.
You shall guess what country based on the color code of the wire.
If not, even we tell everything on the regulations, here..... Its useless, pointless and idiotic.
Good te see the US is learning how we do it for years in Europe 👍
Coupling between lines can cause a lot of EMI issues. If they start running AFCI breakers they will quickly do it right vs pretty.
Hi there I'm in the UK and I think that this may be one of the best installations I've seen
thanks
What is this system called and what country is it used in?
It's Vietnam - they mentioned the currency they use in one Video
Worried about the amount of building that's been removed, is that ok? In the UK we run rings and radials, it's much cheaper. I guess its easier to replace a cable here, but with modern techniques and PVC cables that last forever, not sure you'll have get enough maintenance benefit, just the shear amount of conduit increases your risk of a fixing damaging a cable.
Is that PEX pipe you are using for conduit?
Being in the U.S., we aren’t allowed to use it of course, but I like how clean you made it look
It is completely different from pex pipe, it is a type of PVC produced to make electrical conduits
@@CIFYou What is the fire rating for that PVC?
it does not catch fire.
@@CIFYou The high chlorine content of PVC-U causes an advantageous combustion behaviour. Self-ignition resulting from temperature influences occurs only at 450 °C. PVC-U burns when exposed to an open flame, but extinguishes immediately after removing the flame. The oxygen index amounts to 42 %. (Materials that burn with less than 21 % of oxygen in the air are considered to be flammable). PVC-U thus falls in the best flammability class V0 according to UL94, and in the B1 building material class
We have similar types of conduit, its just not common.
At 9:47 he is supposed to use green and yellow color wires. As he is following rules so it should be implemented 😂 😂😂😂
Thanks for turning the crib to a supernatural charging station
This is exactly how i would do my house. I also love the industrial look of it. I would leave all the tubing exposed. But that's just me.
wow I've never seen such a clean electrical installation !!!
Hi I am in Canada and i have so much admiration for your work just want to know in which country are you?
1 drunking or cable tray can carry all cable, make all's in center can save to avoid disturbing others architectures or equipment's installation space....
I wondering after they put that's many of conduit's on ceiling, how's the plaster ceiling support get space to install.....
This kind of installation will make trouble with others specific contractor's super headache and hard to install their things....
or maybe the whole renovation everyone just corporate to priority and suit for electrical installation works, even no need to install furniture or ceiling?
I'm no american, idk how the nec works, but i do prefer your way of doing it, it all looks so neat and like it needs to be that way, nothings out of place, everything is as it should. I would trust this more
Love it when money forces changes to the code. AFCI for example.
This is good but the control box is not the same in Nigeria. Anyway his work is great.
that looked absolutely superb installation wise.
Yes, it looks nice, but is it up to the local electrical code? Well, we do not know, many kinds of info is missing before a judgement can be made.
Incredible, where are you from? I would like to know the name os this PVC system that you use.
I come from Vietnam, it is a type of fireproof pvc-u. This is just the wiring for an ordinary apartment
Very systematically arranged & wiring done😊😊😊😊
a man after my own heart. Speaking as a general contractor.
I see that he installed the demon summoning portal on the ceiling. That's a new one on me but I'm sure it's the standard in his country.
Oh don't think too much, I just need 5 equal points on the circle
Wearing non-static/ non-cotton clothes plus metal jewlery is a bit of a no-no in Australia.
I think we can do this in N.America to NEC code. It just, who wanna spend that much money, for something you look at once and seal behind a wall.
Oh, I think American standards are better
It makes it so much easier when you have to change anything afterwards - new internet cables, a new outlet,...it absolutely sucks to work with a messy, disorganized electrical installation
@@braindecay9477 yep. i'm looking at having to rearrange all my wiring in the attic (1st floor apartment) that was installed in the 60s (UK resident) prior to having a consumer unit upgrade.
The MC menace and it's consequences lol.@@braindecay9477
Brutalism is always an option.
Looks great. I cringed when lighter was applied to HS tube close to other wires.
I thought PVC was too flammable to use in conduit? at ~6:00 they ate a whole lot of the Primary concrete joins support to curve those conduit traces through. hope that's not load baring. This stuff looks great, very aesthetically pleasing.
thanks
Very neat and artistic. This method is not more efficient or better than North American systems for installation time, the amount or the amount of materials used, or safety.
You're right, it's not too strict compared to North America
Why use conduit if the wire is already mechanically protected and double insulated ?
Pour concreat ower it and u will se why+ if u decide i want somenthing added a can alweys pull more wires fthrew.. Insted of owerloading 1 cable
Not too keen on phase colours L2 and L3 Green and Yellow 😦in the consumer unit as the earth/ground is these 2 combined.
Very neat installation. Working pn ceiling is very hard to his neck. He need to wear safety glasses.
bro this electrical installation is expensive asf
No. It's standard.
@@NileshKumar-uf4vh nuh uh
definitely not in my country
@@agresywnakaczka3885 what I meant is labor is cheap and quality of install and work is better. Hence standard . Standard doesn't mean madeup govt shit where I'm from.
@@NileshKumar-uf4vh You clearly have no idea what you're talking about.
How is it supposed to be cheap and better to make a separate line for every damn receiver?
it will take several times longer, and be several times more expensive. Not cheaper.
@@agresywnakaczka3885 every country isnt same. Some countries still have reasonable prices for everything. It doesn't take longer or much more money as conduits are cheap and labour is cheap. If I have things done like this now in initial stage cost will not be an issue as most people charge less for bulk initial work and I can have as many outlets possible. No need of extension cords etc ever.
Beautiful work brother.
op oooppp opppssss!!! there it is! 5:50 beam is chipped off, the safety of the electrial is useless is the safety of the structure is compromised
That is with the engineers permission, after I finish the electrical conduits a lot of site supervisors will come and check if they are up to the mark
Вся прелесть этого в том, что вышедший из строя провод можно поменять в любое время, не разрушая финишную отделку помещения. Классно. Насчёт кода не смешите. В каждой стране свои нормы и уж Китай это точно не страна третьего мира.
Lovely Work. Hats Off To The Guy ❤
thanks
Meanwhile, in videos shot in america, cables are attached straight to the wood frames
4:19 bro is drawing a spell casters summoning diagram
can you please tell me what PVC type you installed? it's seem like very easy to use and very easy to bend unlike the other PVC pipe...I like your job very neat...
it is a kind of thin pvc, it is very popular. When bending, there should be a spring inside to avoid bending the tube.
@@CIFYou can you please tell me what exactly the name of that pipe...or may I request if is it okay if your next content in your UA-cam please mention in your vlog, what are the name of the tools you use.. please...thank you
You can bend regular pvc like that, look for that spring to bend pvc and you’ll be fine!
@@JeraldDalnay look for 'plastic conduit'. It has a different wall thickness to plastic plumbing pipes.
In the UK it comes in 20 & 25 mm diameters.
Wow man! You made this with these primitive tools. Amazing 😉 p.s. why all red this time (L1/L2/L3)?
Each of these red conduits will carry 3 wires, 1 hot wire, 1 neutral wire and a ground wire.
isn't the red color pipe used for hot water, im confused i thought electrical got the grey color
This is not in America
4:40 years later the owners will not understand why the hell many demons, ghosts and even freaking Satan are all the time appearing in their department.
Looks pretty, but the extra expense may outweigh the benefits.
Ben bu döşenen boruların üstüne sıva çekmem :). Tam bi sanat eseri olmuş.
Hey Canada: "..each plug and light has its own dedicated cct. and no cct less that 15A." ?????? ...astounding. That wouldnt work in Australia 🇦🇺
I mean, its apples to oranges. Its not very difficult to make your installs look like that when you dont have to worry about hvac equipment and plumbing lines being in the way.
I definitely get the impression he gets to get in before the plumbers and tinners
These guys are also the plumbers. Not sure if they're also HVAC. Because they know what everything needs to do they can plan from beginning to end how they're going to run everything and aren't going to have stupid pissing contests over space.
They have over videos showing their plumbing work. Anything with a green line or big white pipe.
Maybe if they FOLLOWED blueprints in the U.S. there wouldn't be so much conflict between the trades, ASSUMING the prints were done correctly and showed everything. Residential work in the U.S. is mostly garbage.
@@hotpuppy1 You get what you pay for. And when you pay for cheap pretty you get pretty cheap.
@@hotpuppy1 I saw a building site shut down mid build because the architects left no room whatsoever for for riser space. it wasn't caught till after the framing was done, floors poured and the roof set (dried in is the term) all the trades immediately began to fight over the true lack of space to set their HVAC, plumbing, wiring....
The site was eventually red tagged, and the building torn down two years later with lawsuits abounding, namely because it was impossible to install anything in the building without compromising it's structure.
Yes, most prints leave a LOT to be desired
Now I’m mad my house doesn’t have electrical installation like this
This work is too perfect
Check out that hacked up concrete beam at 5:40. Yikes!
So clean work😮
How can i hire this kind of electrician? Where can i?
As long as you're not overloading circuits and using the appropriate gauge wire, I don't see how this is a problem. This is OCD electrical and there ain't nothing wrong with that.
thanks
The lack of a bus bar makes installing breakers a lot of work. Chicago still mandates conduits everywhere due to a fire in 1871. Its unusual to see 3 phase going into a home in the US.
It still looks clean and safe, but incredibly labor intensive. It seems only the privileged few could afford wiribg over there. Electricians in the US get paid very well compared to the average worker, but everyone has electricity.
I heard they can earn 15-60$ per hour depending on their qualifications, is this true?
@@CIFYou $15 an hour would be entry level or an apprentice. For professional electricians your pay all depends on what type of work you do and where in the United States you are working.
“While we don’t recommend smoking, using a lighter could be beneficial to your install…..”
Thật tuyệt. Nhìn tủ điện của chúng tôi như 1 ma trận của dây điện mà thấy buồn 😔
what country is this, and what color denotes ground/earth?
Its Vietnam, not sure about the code.
That's a 20mm malebush connected to that junctionbox
Сразу видно, делал не электрик, а плотник-бетонщик.
Electrician, plumber, concrete chipper are one person
You did well in making the extensions, but you spoiled the concrete and exposed the iron, and this is a serious mistake
it's in the design and I'm allowed to do it.
U do know dat the whole hause is made out of concreate and bricks right... Its not made out of wood more concrete will come ower all conduits plus the hause wont fly awey or breake when a litl bit of wind blows 😂
@@danimlinsek9891
I know it won't fly, but if the iron is exposed to weather factors such as humidity, it will rust.