How to Hook up a Washer and Dryer
Вставка
- Опубліковано 11 тра 2020
- Attention new homeowners who are new to taking care of their house and setting up appliances! Today we're going to go through the basics: I will show you how easy it is to hook up a washer and dryer in your laundry room. For links to purchase the products in this video CLICK SHOW MORE ⬇⬇⬇⬇⬇⬇⬇⬇⬇
Shop Jeff’s favorite tools and great products and help support our next project!
► Shop Wayfair 🇨🇦: www.jdoqocy.com/click-9148559-...
► Shop Wayfair 🇺🇸: www.jdoqocy.com/click-9148559-...
► Shop Amazon 🇨🇦: geni.us/mlVE (Amazon)
► Shop Amazon 🇺🇸: www.amazon.com/shop/homerenov...
► Shop Home Depot: homedepot.sjv.io/nBVOX
► For discounts on flooring, paint, hardscapes, soundproofing and more visit our website:
homerenovisiondiy.com/our-aff...
*****Be sure to use the coupon codes before checkout
Did you know we launched a newsletter? Sign up here: homerenovisiondiy.com
🔨 SHOP TOOLS 🔨
Crimper Tool - geni.us/CrimperTool
Gear Clamp - geni.us/GearClamp
Tape Measure - geni.us/TapeMeasure25FT
DeWALT Mitre Saw - geni.us/MiterSaw15Amp
Level - geni.us/BeamLevel72
DeWALT Circular Saw - geni.us/CircularSaw
DeWALT Sawzall - geni.us/ReciprocatingSawCorded
DeWALT Drill - geni.us/CordlessDrillComboKit
Makita Jig Saw - geni.us/TopHandleJigSaw
Oscillating Multi Tool - geni.us/ElectricMultiTool
Need Answers or Advice for your DIY Project?
BECOME A DIY MEMBER NOW!
Become a DIY Member by clicking the “join” button beside the “subscribe” button - / homerenovisiondiy
► Get FULL access to me and my team for Q and A’s in the DIY Crew Forum
► Participate in monthly LIVE streams for live consulting and Member support!
#justdoityourself #lovingit #washeranddryer
Check out more laundry room videos here:
► DIY How to Gut a Laundry Room
• DIY How to Gut a Laund...
► How to Replace a Dryer Exhaust Vent
• How to Replace a Dryer...
WANT TO WATCH MORE VIDEOS??
Check out some of our Reality RenoVision videos here:
► Sound Proof Guest Bedroom | Jeff's Farmhouse Renovation
• My Bedroom is a Mouse ...
► Modern Rustic Bathroom Remodel | Jeff's Farmhouse Renovation
• Jeff's Farmhouse Mode...
► This Is What A Laundry Room Should Look Like!
• What a Laundry Room SH...
► Subscribe NOW and hit the bell to get notified about new videos / homerenovisiondiy
► Subscribe NOW to our 2nd Channel -- Reality Renovision / realityrenovision
Music in this video may be used from Epidemic Sound. Download free copyright songs here: bit.ly/epidemic_sound
----
HomeRenoVisionDIY may earn an affiliate commission if you purchase something through recommended links. #commissionsearned
----
For instant updates check out the links below and FOLLOW me on social media where you can stay up to date on new episodes and what other nonsense is going on in my life
FOLLOW US:
► INSTAGRAM: / homerenovisiondiy
► FACEBOOK: / homerenovisiondiy
► PINTEREST: / homerenovisiondiy
► TWITTER: / renodiy
Produced by: Home Renovision DIY 2020
Video & Editing Services Provided by:
Subdivision Film LTD.
www.SubdivisionFilms.com
Disclaimer:
Videos produced by Home Renovision are provided for informational purposes only. All material provided within this website is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. The DIY instructions used here are used to simply breakdown projects to their simplest steps. Please use a clear mind and use all safety precautions while following the tutorials provided by this site. Home Renovision does not make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing projects on their homes they are doing it at their own risk and Home Renovision cannot be held liable if they cause any damage to their homes. With different codes around the world and constantly changing standards, regulations and rules, it is the sole responsibility of the viewer to educate themselves on their local requirements before undertaking any sort of project. That being said Home Renovision cannot claim liability with all applicable laws, rules, codes and regulations for a project. Be safe, have fun renovating and ALWAYS stay informed with your local building code. - Навчання та стиль
My Dad taught me the "loosen 'til it clicks" tip about 50 years ago now.... It has saved me many, many dollars in repairs and ruined equipment, and I have taught dozens of young men and women the same tip.
We take for granted what we were taught and learned via "school of hard knocks", and successful experiences... Thank you Jeff for helping us teach the next generations!
what is the loosen til it clicks trick
when you slowly go backwards on the fitting applying gentle pressure until it sits into the thread. that avoids cross threading. Cheers!
@@HomeRenoVisionDIY Thanks!
Same...except for the 50 years ago part... Worst about about it though is getting razzed at work by the folks who didn't receive quality instruction. But I don't care, I'm not gonna strip a thousand dollar thread gage member because someone snickered at me starting to turn left
I'm a single female with no close male friends. This video helped a lot. I was overwhelmed at first now I'm confident. Thanks for the video ❤
Same boat, isn’t he the best! I installed mine already but have been second guessing every move I made. So I hopped on UA-cam, what a breeze! My paranoia is dismantled.
Can I get your numba
Get a man🤷🏾♂️
@@hunter7527 🤦🏾♂️ clown
@@Turfbaby831 but you told her to get a man my guy. I see no issue with that
Great video, after years of trade work you learn a few tips and tricks. If you don't own a pair of crimpers you can use needle nose pliers to create pleats/crimps on the ductwork by gently gripping and slightly twisting the pliers ever 1/4 inch or so around the duct
This is great. As new homeowners with no prior background in anything even remotely home related, this video is so helpful. We don't currently even have a washer/dryer but will refer to this video when the time comes. Looking forward to more beginner type videos as we want to renovate our home, one diy at a time :)
Make sure you level them or they will be noisy and where faster. Also, the accordion vent hose is a major cause of house fires. Use a solid smooth vent to keep lint from building up. Also, that crimped end with be a lint collector!
Your like the dad I wish I had ! I look for your videos whenever I need any Info
At 59, this is the first time I’ve had to do this for myself. Thanks for making this video.
I'm one of the new home owners! Thank you for the video! I went to drain my water heater last weekend and wished there was a video from you about that
Thank you so much for this video! Just purchased my first washer and dryer and due to covid, the company didn’t have installation options. This video has me confident that I can handle it myself!
As an ex home improvement/construction guy and currently an appliance repair guy (a few trades for being not even 22) thank you for what you do, I’ve been fortunate enough to learn these things through trial and error but also my few years of experience. Many homeowners can use this video and many others of yours to save a few bucks from calling a guy like me to come out and have everything ready to go in 5 minutes, the company I work for as do I, always give out and show customers tips and tricks (as long as it’s homeowner, no experience needed) to help save a little money from us coming out. Keep doing what you’re doing, when I started out in construction I came across your videos and it helped be better understand the trade. Now doing what I do appliance videos pop up all the time and I could just about teach the class, seeing someone give good, professional advice is always good! Keep making the videos, they helped me and knowing what I know now, these videos will help the average home owner!
Great video. No condescension at all. Makes ‘impossible’ possible. Even the info about tightening and the washers… Thank you so much for posting.
Great content!!! Always straight to the point and no beating around the bush.
I love you for this video. Just the turn backwards first to help get it on the thread is so helpful. Embarrassing how much never occurred to me. I learn such helpful tips every video. Please keep it up.
Glad it was helpful!
Thanks for the great video. You spoke in the beginning about it being a simple job, people know how to do it, etc. I usually do most of my own work, and really, I watch the videos even when I know how to do it. There's often quick tips or tricks to doing the job without added aggravation. Great and clear video. First time I've seen it. Subscribing now.
Thank you so much for this video. I'm getting a washer/dryer set soon and I feel like I can hook it up myself now.
Thank you for this! I recently moved and have never installed a washer/dryer on my own. I watched another tutorial because I had to switch out my 3 prong for a 4 prong on the dryer, but this video helped me cross the finish line once I’d changed out the cable, so thank you!
The tip how to thread the parts is awesome. Thank you!
thanks, I am a diyer and did not know a lot of things you explained like the litter self tapper screw
Got a my first washer and dryer and dont have any family left, and none of my friends know how to hook up one up so this is super helpful thank you so much
I am a 22 year old female with a small apartment, and am looking at different homes and such for my future, however i never had an opportunity to really see these things done or know how they work, and sure they are simple, but as someone who has never ever seen them done, this is a breath of fresh air for when I'll have to do it myself. Thank you!
I've heard that the new recommendation is to avoid flexible ducts and instead use rigid galvanized steel because the coils in the flexible duct collects lint and inhibits air flow. Also, I learned to never insert a screw as it will collect lint also.
"• DO NOT use sheet metal screws or other
fasteners which extend into the duct that could
catch lint and reduce the efficiency of the
exhaust system."
One tip I saw was to slightly crimp outward, a "notch", in the hard duct as a kinda "catch" . The adjustable hose clamp as it will slip over the notch but not back down....
Wow thank you for making this set up soo easy for me!!
So thankful for these videos of yours
Thank you so much I just got a washer and dryer for my home after months of not having the money for them until now
first time homeowner here, my washer and dryer are good to go but LOVE the video now I know how they work
Thanks for watching!
I watch every video you produce.....always very helpful....even after 43 years of doing everything!
Keep em coming.
Great to hear! Cheers!
Congrats again in the 1M Subs. As you deserve it.
You guys have a great channel, & even though your ‘big”; ya still have the “small channel” mentality & make every person feel like they matter.....that’s so cool of you guys👍🏻
Great vid for beginners, & showing that ppl can do this themselves. Also get the question about, you afraid won’t have a job b/c of channels on UA-cam. Answer is, nope...not at all😉 (there’s always work to be done & ppl not wanting to do themselves....so no worries, lol)
Cheers✌🏼
Aren't we supposed not to use screws on a dryer ventilation? Because lint could accumulate on the screw and might create some problems oer time?
Correct, it is against code to put screws in a dryer vent line.
Beautiful stuff this was soooo needed 😭
Thank you, for this straightforward video. Just what I needed today!
Glad it was helpful!
I just bought a 100 year old house and one of the first things I had to do was make a dryer vent passage to the exterior with a hole saw. It was scary but it came out great!
those things can have quite a kick. I have switched to cutting in a diamond shape with a sawzall. never kicks me off the ladder or breaks my hand. Cheers!
Hey bud ive been watching alot of your videos for shower renovation. Im about to start tiling and was wondering if you have any videos on tiling a shower curb. Thanks for the vids. Very first shower redo for me. And you have been very helpfull.
Thank you for the explanation 🙏🏼👏🏼👏🏼
Also me being an HVAC tech it’s against code “at least I’m Ontario, Canada” to have any screws in dryer venting it’s a fire hazard because it can catch the lint.
LOL, that is why the old pipe fell off. Cheers! You can't rely on tape.
@@SomeDumUsrName Sure, and as a DIYer, I've learned a treasure trove of information from Jeff's video's, which is a lot more than I've learned from you. I've also learned that there are some who just come with nothing to contribute other than criticize a man who's helping to empower others figure out how to do things for themselves. Beside, codes vary from state to state and I happened to look up code M1502.4. In some places, as long as the screw does not protrude inside the ductwork more that 1/8", it is code compliant. Even if it's not code compliant, that screw end would have to be one hell of a lint sucking magnet before it would pose any sort of danger. Anyhow, for those of you who are so frightened of a screw, just add a zip tie and move on.
I was just gonna say that was a great tip but your right.
The right kind of tape(foil tape) will outlast the dryer. I bet it was duct tape used.
@@okymek This happened with my dryer vent. I'm not sure if that vent was ever cleaned. I bought the house just over 2 years ago, installed new washer/dryer. The first year or so it ran well enough. A few months into year two we noticed it taking longer for clothes to come out dry. Then we started getting these errors on the dryer that came on progressively sooner. Realized it was associated with the lint trap or dryer vent. Lint trap is cleared after every use. So, spent the $20 or so dollars on a snaking dryer vent brush. Took nearly 2 hours to clean that sh*t up. I couldn't believe the dryer actually attempted to run and hadn't burned out. It was seriously clogged for what nearly seemed the entire length of the vent (vented through the wall in the center of the house at an angle at the precipice of the roof). Wife thought I was crazy but after the first couple handfuls of old nasty lint in the vent, she realized we were in it for the long haul until it was completely clear after two full runs. Now it dries like a d@mn champion. I made sure to put about 4 to 6 inches of vent hose around the piping to ensure there was a solid 2 inches passed the worm gear after tightening to prevent accidental slippage.
Very well explained,thanks a lot Sir.
Thank you so much for the insightful video!
I did get one good tip. Thanks!
Thank you for that help!
Thanks for this concise video. I thought I knew what to do just needed confirmation.
I am pulling up of rug on stairs going up into the bedrooms do you have a video on how to install laminate or something like that
Leak prevention pro tip: fasten the washing machine's drain hose to the standpipe or wall box drains securely with a beaded strap or zip tie. Make it snug but not so tight it kinks or cuts-off the drain hose.
I always thought it would be better to use a rigid tube instead of an accordeon tube for such a long length , especially vertically?
It is safer!
Hi, great video! I'm trying to find ways to save on electricity and water. I wondered what your thoughts might be on turning the water off and unplugging the washer when not in use?
Super thankful for this because the people who deliveries them said the complex required their mantanice to install them and they weren’t allowed to and then mantanice says no we don’t install we just have to inspect them to make sure they arnt leaking 🙄 so now I’m stuck doing this myself
Great video - one question though - does it matter if you put the exhaust duct for the dryer lower or higher? and is there any cons to it?
Thank you so much! New home owner here!
Does the gear clamo go right over the metal rung? Or in between them. I also eneded buying an 8ft one when I really only needed 3. Live and learn I guess.
Hi Jeff. Love your videos. Right to the point. Question regarding dryer venting.... My dryer vents straight out the back, very direct. Have a plastic hood on it with the damper but as we know they dont exactly seal the greatest. The problem is the amount of cold air coming into the dryer (we live in Canada) is unbelievable. Our whole laundry room is cold because of it even though we keep the dryer door closed. Same thing with our ceiling bathroom fans that vent out into the soffit.. Cold air comimg into the room. The House and everything is brand new and professionally installed so its not a quality or workmanship issue. Any suggestions.
I'm about to have to do this in a rental. Thanks!
Do you have a recommendation on max length for dryer vent tubing?
How do you clean the dryer duct if the unit is in the basement and it goes up into the first floor?
Our dryer duct is ground floor going directly outside.. It is easy for me to clean it every three months..
Thanks!!!
Enjoyed you mini shed build.
Glad to hear it!
Jeff you're the best
Can you do a video about moving laundry room upstairs? Your content are always more informative than other UA-camrs, I was surprised you didn’t already have a video. Thank you
Thanks for the video =)
big help thanks
I'm curious, what is that large copper coil next to the water heater? Never seen this before and we just got our tankless installed.
That is a waste water heat recovery unit to collect dishwasher and washing machine heat. Cheers!
Thank you for this video I'm new to having a place of my own. I keep the water lines on right?
correct Ashley. The only time you need to close the valves is when you are going on vacation. I usually just turn of the water to the house when I am away. cheap insurance.
Definitely helpful thanks.
Glad it was helpful! Cheers Larry!
Thanks for this. I am eager to learn how to plumb two new laundry rooms in my 100-year-old house with no current set up. Help us with the plumbing and venting in the next one? :)
Thanks!
lol my dryer came with out a plug had to ask some one to help wire it up. to a plug while i am confident with a 110 wiring job had never tackled 220
I was over thinking where the washer hose goes, I thought to myself, it cannot be that simple. You proved me wrong, lol. Thank you! The dryer is a hassle, do I need the elbows or can I install without as you did?
Many thanks
Professional and useful content
what did you do with the drill on the dryer when you placed the tube in?
I have a house almost done being built. Utility sink in garage stub outs with 2 inch drain line. I will be moving my washer and dryer to the garage next to the sink. What is the best way to connect the drain home from the washer?
Thank for making this video even though most of us don't need it. I am amazed every day at how many well educated people have no idea how to do this! Being divorced, I had to learn these things on my own while raising kids. You are helping so many learn to be self sufficient!
I was hoping to get instructions on leveling front load washer, which I’m attempting. I got machine to “not rock when pushing down on diagonals” as instructed in manual but level bubble is touching left line of the two lines in center of level. I lowered left nut as far as possible. Might have to raise right. Checked floor and it is in fact the floor that is problem, showing same bubble, but when I attempt to raise the right the the level stays the same, but now the washer rocks. That would mean I can’t raise it higher to attempt to level bubble because it’s already rocking with the slightest adjustment. Maybe I’m missing something here in using a level or if that tiny bit off matters if it’s in between the lines. I’m thinking the “not rocking test” is more important than greeting the very center of the level (and I did borrow a second one just in case it was inaccurate). I’m afraid to run machine and chance damaging.
Is leveling not required for top loader? Not sure what to do. Perhaps you can do a second washer/dryer video for front loaders. Too late for me, but might help someone else.
I was to see you move the whole set up to a new room/area. Hot/cold lines, drain and new vent for dryer. Do you have a video like that? I'm planning on buying a fixer-upper and want to move the laundry room to the other side of the house entirely but it would Definitely make me feel more confident to see you do it. Thanks!
Hi Apryl. I am filming a plumbing video today that will solve all your problems. Cheers!
@@HomeRenoVisionDIY YES! THANK YOU! I can't tell you how awesome your videos are, you know what your doing. I hate to miss even one! So many have tried to build a YT community but fail without the correct knowledge ,experience and confidence you have, my hats off to you!
A question about dryers: i would like to place one in my kitchen because theres no other room anywhere, and i dont have an exhaust pipe there to connect it to. Can i just put the other end outside the window?
Sir, you are a master. I have a question 😊
can I install the dryer vent tube straight out, (like behind the dryer) or has to be done the way you show it in the video?
straight out is even better if you can. Cheers!
Thanks jeff
Thank you
So cut off the slack in the dryer hose to help prevent lent build up? Make it as straight as possible?
For dryer that have hot water connections, can I unplug it and leave it open if I don’t use that feature?
yay this video is for me! :)))))))))) First time home owner xD
Make sure the shipping screws/bolts are out if you have a side loading washer; it acts as a brake for the drum so it doesn’t spin during shipping, You are going to hear such a big difference if you kept it in
We moved our washer and dryer in our basement and were doing this by our own which is helpful but we're stock and pending job bcoz of the vent that we need to dig a hole and connect it to our main floor vent hole in the wall.
thx jeff bhaji
Hi i just purchased samsung DVE45T6000V electric dryer coonected with three wire connections it has power when i start it it make ratling noise any idea am i missing any installation steps or does it have any shipping screw to remove or any thing like that , thanks
The dryer connects to the COLD water not the Hot.
Love your videos
Jeff, my old furnace vented through the chimney, can I use that to vent out the dryer?
as long as you can get a 4" rigid pipe in there and the run is less than 20' from the dryer.
What are the lists of tools to get for each appliances? are they standard or is it dependent on the machine?
I just brought a washer and dryer however am on the second floor and the hook for the washer and dryer is in the basement. How do I do a hook up on the second floor? Do I have to run a wire from the basement to the second floor on order to have it working??? Help lol
Question: The duct for the dryer, does that have to be a distance from the wall or does that not heat up enough to cause an issue to the lining behind the wall, or in my case drywall? Thank you
It's better to leave a bit of room if you can. Will do anything to the wall? No, but i is alway good to give it a little room to make sure you don't squish any part of the hose. The 90 degrees angles are the weak link in a hose.
You make it sound like everyone knows this, but the duct stuff was super helpful. I'm mad that I didn't learn this before I tried to connect a new hose to my portable air conditioner. I bought a rather rigid tough aluminum hose and I was terrible at connecting it in a way that it would stay on. A dryer hose and that screwing stuff would have been much better.
so is ok not to get that blue thingy?
How could I make sure the pipe hook up is the proper one for washing machine hose.
Thanks Jeff, after much grief, I found out there was something called shipping bolts which makes the machine shake, rattle, and roll across the room. Those need to be removed. Took me months to learn the hard way.
Yes. And they destroy your washing machine
Hi there. Isn’t there has 4 lock in the back of the washer you have to screw it off?
hey jeff i heard that some washers have shipping bolts you need to take out, that keep the drum from moving around too much during shipping. is this specific to front load washers compared to top load? or is it all the same?
shoyru166166 .....I have seen this rod on the stacked units....if you don’t remove it, you will damage the washer and it will cost big bucks for repairs. Great for pointing this out.
Always read the manual before installing!
just look on the back lol usually it is only front loads.
Actually Jeff, you missed one of the most important things to do once you've got them hooked up. Ensure they are Level. Spend 10 -15 minutes making sure they're level side to side and back to front and your units will make a lot less noise and last a lot longer.
great point. I guess I just take it for granted with a new build. Cheers!
How to level the floor first? I really dont feel like using liquid self leveling. Thinking plywood and sand (small laundry). Throw some floating tile on top
Level and first the water then the electric.
@@valentinek.t3327 You can get plastic pans that go under your washer. You can run that to your drain then you don't have to worry about damaging your wood. Level it with plywood but remember to keep a slight slope towards the drain. You can use vinyl flooring so you don't have to worry about water damage since it is a high humidity room.
This is what loving your work looks like. Thanks so much!
Hey Jeff that extra one is hot or cold water?
But how do you install the pipes and 220 wiring for the dryer?
Do you have a video for a gas dryer
stainless steel washing machine hoses to reduce chance of flood?
The flood is usually the plump not the hoses!
We had the valve fail and cause a flood once. Then the second time was the fill pressure sensor failed and it just over flowed the tub.
Already knew how to do that, but thanks for everyone who didn't! It's easy, no need to call anyone to have them installed, just like the dishwasher. :)
We bought a house 4 months ago that came with a washer and dryer. The dryer is an older Whirlpool that runs on gas. As a new homeowner, this is a complicated scenario for having to clean out the venting/exhaust.
Could you put plumbers tape on the threads?