Changing the rear discs and pads on a Range Rover Sport.
Вставка
- Опубліковано 21 лип 2024
- Hans from Rimmer Bros takes us through the process of changing the rear discs and pads on a Range Rover Sport, adding detailed tips and tricks in the process to help make your life easier when undertaking this task yourself. Remember to always put the vehicle into "Service Mode" prior to undertaking this task.
- Авто та транспорт
Who would dislike a video like this,that explains everything in detail???
Thank you Hans, your explanations are efficient.
Thank you! a quick high level review is JUST what i needed to get me off my arse and motivated to swap out my pads! Cheers
You're more than welcome :)
Thanks very much for them video, very informative and lovely clear presentation 👍
Thanks, really useful video and excellent presentation :)
thank you very much your explanation very clear and you do it slowly the person can understand more , so thanks mate
Brilliant video, think I will bring my RR Sport to you for the inlet manifold repair
Thank you very much, that was a great mechanic 🧑🔧 . I would like to see a video of the rear ace antiroll bar replacement!!!
Ok - looks simple enough. Going in this weekend to give it a go.
Well done!
Make sure that sensor isnt worn down that the light is on. Those sensors are one time use. I learned the hard way. The front sensor was different from rear as it liked to see continuity and the rear didnt.
Nice video. thank you
Thanks Hans!!
Thank you. You´r great.
Thank you. The dealer wanted a ton on money to do this. I've done a ton of brakes before and I figured the high cost meant it was a difficult job. Looks like any other standard brake these days.
You prolly dont care but if you're stoned like me during the covid times you can watch pretty much all the latest movies on instaflixxer. Been streaming with my brother lately =)
@Jasper Joseph Yea, been watching on instaflixxer for months myself :D
great video....
Thanks this saved me a lot of money and I learned sooo much. Question for you... Is the EPB self adjusting on the 2010 RRS S/C?
From 2:40 it explains why disc doesn’t just come off and what to do. Thankyou!!!!
Though have not worked out how to rotate the disc so access hole is at 11 o’clock...
So how do we change the bearings? Is it the same as the wheel hub assembly in the front?
if just changing the front and rear pads, its a simple job correct? 2006 range rover sport (NA) I need too
what happened to the Allen key bolt adjustment ?
is this the same process for the rears of the 2011 full size range rover supercharged? not the sport.
What tool is need for the bracket bolt?
What year is the RRS , I have a 2013, same procedure , do I need to put the EPB in service mode ?
I love your works ride on👏🤔
excellent
How disc do you recommend me for rrsport 2006?
Thanks for the great video .....really helped me ...Why on earth would anyone give a thumbs down .....obviously could only be a garage lol
Haha...we couldn't possibly comment, Stu! ;)
Adjustment procedure is wrong.
It’s supposed to be adjust till disc requires at least 40nm to move with a torque wrench but no more than 90nm. So it shouldn’t be locked up.
Then turn back the adjuster exactly 8 clicks.
How about putting brake in service mode as if you just crack on with job you will cause handbrake fault
We have stated this in the video description to make sure you place the vehicle into 'service mode' before starting. Apologies for any confusion.
How do i put a 2012 Range Rover Sport in service mode?
Think this may be done by the on screen menu where your sat nav goes but not sure.
can you reset epb yourself or is it dealer only ? will it be OK to do as you have in video and all will be OK without dealer reset thanks
As stated in the description, the vehicle should be ideally put into service mode and reset with the tool afterwards.
do u need to mount epb or is manual way ok as in video
Not sure what you mean by mount the epb, but you might be advised to consult a dealer to reset the epb.
Great vid, I'm tackling this on the weekend. This guy is so chill I almost fell asleep watching haha!
How exactly do you put the vehicle into service mode?
Ha, yeah, Hans is pretty horizontal! As for service mode:
In the car with ignition in Position II, press the brake pedal three times and hold the pedal down.
Push down on the EPB switch for 3-5 seconds.
Go to the main fuse box in the engine bay and remove FL8 fuse 30A (pink Fuse) this will ensure that the EPB is not accidentally re-engaged.
Rimmer Bros TV thank you!
What year is the Sport? Thanks I have 2012 is it the same?
HowtofitfrontsplashshieldtoL332
Hello, do you know on a 2012 RRS HSE, you HAVE to replace the rotors as well?
A very common quandary. We would always advise to replace both at the same time. Discs may not look too badly worn but they have a certain heat capacity when new. As the disc wears this capacity is reduced and can transfer it to the fluid, caliper etc and cause damage or serious reduction in efficiency. Having said that, it's not a hard and fast rule. You may be quite satisfied with the performance of your brakes if you just change the pads. But as I said, we would always recommend changing both. Hope that helps.
When I get to the 2:45 mark, I can't turn my rotor to 11 o'clock.
My 2011 Ranger Rover sport automatically turns the parking brake on if I put it in neutral and don't have it running. I don't want to work on the car while running because I'm in an enclosed space, nor am I sure it would turn anyways.
What gear are you in for this? I assume neutral. How did you get the car to stay in neutral without the parking brake on?
FunInfusedGames how do you cope with something like a car wash? Engine has to be off and car in neutral otherwise the car can't be pulled through the car wash
pull the FL8 fuse out
Good job 👍 I’ve had problems trying to take cat off on 2.7 sport 2006 could you help in anyway would be appreciated much 👍👍
Hi Aaron Thomson, thank you for your comment. We would recommend that you take your Range Rover sport to a garage who will be able to best help you remove your Cat.
How often ( mileage) do pads usually need replacing? Thanks
Hi Alfie Dog, brake pads are usually changed once worn (when low or worn unevenly) Your local garage will be able to suggest more accurately what to keep an eye on.
Do you have to do anything with the suspension before lifting the car?
You're welcome to support it if you wish.
Manual says to raise vehicle suspension when removing the wheel. Just gives you more room to work.
Saludos desde Costa Rica, no se necesita computadora para abrir el freno de mano eléctrico, y poder cambiar las pads?
Hola, Alan. No, pero debe poner el vehículo en "Modo de servicio" antes de emprender esta tarea. En el coche con encendido en la posición II, presione el pedal del freno tres veces y mantenga pulsado el pedal.
Empuje hacia abajo en el interruptor EPB durante 3-5 segundos.
Ir a la caja de fusibles principal en la bahía del motor y quitar el fusible FL8 30A (fusible rosa) esto asegurará que el EPB no se vuelva a activar accidentalmente.
@@RimmerBrosTV gracias por la respuesta, como le quitó luego el modo de servicio y si al quitar el fusible, no se activará algún sensor en pantalla, que luego habrá que quitar con la computadora?, gracias de nuevo, por tan exelente videos
@@ALANA2240Lo siento, Alan. Ahora entiendo lo que quieres decir. Soy la persona que toma los videos que no funciona en el coche y esto fue hace mucho tiempo. No creo que el vehículo necesita tener ningún código de falla restablecer, pero sinceramente no puede recordar. Es posible que deba llevarlo a un distribuidor después. Trataré de averiguar más.
@@RimmerBrosTV mil gracias
@@ALANA2240 De nada.
good video but not sure why he only cleaned the outside of the disc to remove grease etc, would be the same on the inside
He says "Thoroughly degreased". We like to think that people who are going to tackle their own mechanical work at least have a touch of imagination and ability and that we don't have to show you every single minute facet of the job in order for you to succeed. Many thanks for your input though and we'll be sure to try and improve our work.
Buen día, preguntó si me pueden asesorar,
1 tengo range rover sport 2006, podría cambiar el idioma original francés del los comandos en la pantallita y ponerlos al Español
2 el auto tiene 148000km no le cambiaron aceite de caja automática que hago, la dejo mejor así o lo cambio por succión?
Diríamos que es posible, pero tendría que traducir su manual de propietarios o preguntar a un distribuidor. Además, definitivamente cambiar el aceite de caja automática. Si usted puede conseguir que alguien para hacer un rubor es mucho mejor y la caja automática tendrá una vida más larga. Tenemos un video sobre el uso de una máquina de lavado.
Aquí está el video: ua-cam.com/video/E8Ycqhb3YpA/v-deo.html
@@RimmerBrosTV gracias solo gracias, por tanta amabilidad,
Solo una consulta más cuáles pads son mejores para estos autos, cerámicas o semimetalicas
@@ALANA2240 No hay problema. Utilice cerámica únicamente si utiliza el coche duro o si está remolcando. De lo contrario, las almohadillas de metal están bien.
This will not work on my 2016 Sport. Entirely different brake caliper.
Check brake fluid 9:25
6:00 tighten shoes
,l0m