Thank you for sharing! I like that this design saves space, You should PATENT DESIGN, it's sounds like pros love it, but will definately STEAL your brilliant idea. You deserve credit for your innovative idea.
There are three major defects here: 1: at 10:55, the gate is too noisy. major sound come from the roller wheel when it sliding, I think it's because the angle bar a bit under size and the joint at turning area is too sharp, the roller wheel is hitting welding bolt when sliding. Especially compare to the test door at 2:43 which very quite. 2:at 4:25, you can see the top holder of gate, should use double plastic/rubber roller instead of flat holder to reduce noise. 3: at 5:17,the lock at left side only can be lock inside, can't be open outside. that is a bit inconvenient. Especially when family member lock the gate, but other members come back late, have to weak up the family member to open the lock.
I am on a corner across from a park and want the option of moving 60 ft of fence by automatic switch. and the returning it for security at night. What would that cost in dollars fully installed?
Hello, we're grateful for the helpful guidance provided in your video on building a curved automated gate, and we've successfully sourced the necessary materials such as rollers and round bar. However, we've encountered an issue with our automated sliding gate where the end of the gate is lifting and causing the foot rollers to derail. We've attempted to troubleshoot the problem ourselves, but so far, we've been unsuccessful in identifying the root cause. We'd appreciate any suggestions or solutions you can provide to help us fix this issue. Thank you for your time and assistance.
Hello! I wanted to provide an update on our progress. We were able to identify and resolve the issues with our gate thanks to your helpful UA-cam video. Firstly, we noticed that the fixed end of the gate was much lighter compared to the 5 connecting curving gates. To address this, we added more tubular and plain sheet material to balance out the weight. Additionally, we added two more roller wheels to the fixed end of the gate for better stability. We're thrilled to report that these modifications have successfully resolved the issues we were experiencing. One important lesson we learned is the importance of following the design and weight specifications for the gate. In our case, the combination of tubular and plain sheet material made our gate heavier than expected, but we inadvertently copied the same design for the fixed end of the gate which made it much lighter than the others. Thank you again for your help, and we're grateful for the valuable knowledge we gained from this experience. I uploaded a short video so you can visualize :)
Great video by the way ! Does the ground have to be level on both ‘axis’ ? I hope that makes sense… I think yes ? Can there be any little tolerance on differences ?
Very impressive work. I had a similar idea but the rail would be below the surface of the drive. What stopped me was the debris that may have collected in it causing problems.
Swivel wheel will be damaged in less than 1 year, then have to replace all at once coz other wheels are failing too. Derailment is a headache. Nice design but obviously not sustainable. I regret with mine, which is a half folding gate only.
Impressive, ideal for small spaces !!!! Lovely if a parts/ fittings listing was included !!!
Dr-b
@@reynaldodeguzman4480 A
@@reynaldodeguzman4480y 4 2 at yu 8
Pekerjaan yg punya skill kreatif yg bisa membuat seperti ini semoga sukses bos'Ku
Thank you sir for the knowledge about tutorial gate i like...super..
From indonesia.
Excellently shown step by step.
Thanx
BRILLIANT.....!!! GREAT IDEA & EXECUTION.....THANKS FOR SHARING
so fearless
crocs and sunglasses against hot welding.
my guy :0
Wow wonderful work.
Beautiful Gate!
Thank you for the this I learned from you, am also a welder thank you 🙏
What exactly did you learn? How to fuck up your eyes and increase your likelyhood of protracting skin cancer???
I'm a welder too and that's ALL i saw!
Thank you for sharing! I like that this design saves space, You should PATENT DESIGN, it's sounds like pros love it, but will definately STEAL your brilliant idea. You deserve credit for your innovative idea.
It's hardly unique or original mate
Muchas gracias por compartir su experiencia en éste trabajo espectacular.
Felicitaciones!
excellent job but what stops the top from been unstable thanks top job
Napaka bangis 👊👊👊👏👏👏
Bravo good job well done
Deatils, specs of all materials used please...
Very innovative!!!
Salute!
Very....very good..
Thanks mr....👍👍👍
Great design and supper skill..
Great idea!! Good job👏🏽 can you share a link for where to buy that type of hinges and wheels? Thanks for your help!
Nice 👍🏻
Hi. I’m just want to know what city you’re live in because I need someone to install my sliding gate opener too. Can you let me know please thank you
So elegant nice 👌 gate
Great design
Genius idea
A material list would of been nice, also where did you get the gate hinge??
looks like garage door hinges, the more important question is where to get wheels with a castor bearings
Good idea...one question : how to make the top of gate to stable? Is possible to down when it push by child or someone?
is that 13mm x 76mm panel
There are three major defects here:
1: at 10:55, the gate is too noisy. major sound come from the roller wheel when it sliding, I think it's because the angle bar a bit under size and the joint at turning area is too sharp, the roller wheel is hitting welding bolt when sliding. Especially compare to the test door at 2:43 which very quite.
2:at 4:25, you can see the top holder of gate, should use double plastic/rubber roller instead of flat holder to reduce noise.
3: at 5:17,the lock at left side only can be lock inside, can't be open outside. that is a bit inconvenient. Especially when family member lock the gate, but other members come back late, have to weak up the family member to open the lock.
Hi i have issue roller derail , any sugguestion?
lOVE this gate system & would like to have design diagrams
ua-cam.com/video/yhMs-OrUjfU/v-deo.html&lc=Ugz_3CA_9DYQTxhVmO54AaABAg
I am on a corner across from a park and want the option of moving 60 ft of fence by automatic switch. and the returning it for security at night. What would that cost in dollars fully installed?
9870636105
is that wood for black panels or plastic
Aluminum
@@yu3320 thank you
Solid boss
If in case
ya gir gya to
because uper position per koi supports to nhi hai
Hello, we're grateful for the helpful guidance provided in your video on building a curved automated gate, and we've successfully sourced the necessary materials such as rollers and round bar. However, we've encountered an issue with our automated sliding gate where the end of the gate is lifting and causing the foot rollers to derail. We've attempted to troubleshoot the problem ourselves, but so far, we've been unsuccessful in identifying the root cause. We'd appreciate any suggestions or solutions you can provide to help us fix this issue. Thank you for your time and assistance.
Hello, can you please shoot a video for me to see? Please make sure to shoot it in detail.
@@yu3320 ok, thank you. I'll create a video in detail
Hello! I wanted to provide an update on our progress. We were able to identify and resolve the issues with our gate thanks to your helpful UA-cam video.
Firstly, we noticed that the fixed end of the gate was much lighter compared to the 5 connecting curving gates. To address this, we added more tubular and plain sheet material to balance out the weight. Additionally, we added two more roller wheels to the fixed end of the gate for better stability.
We're thrilled to report that these modifications have successfully resolved the issues we were experiencing. One important lesson we learned is the importance of following the design and weight specifications for the gate. In our case, the combination of tubular and plain sheet material made our gate heavier than expected, but we inadvertently copied the same design for the fixed end of the gate which made it much lighter than the others.
Thank you again for your help, and we're grateful for the valuable knowledge we gained from this experience.
I uploaded a short video so you can visualize :)
Las ruedas son fijas?
thank you for the idea
what type of hinges did you use, thanks in advance
^
ua-cam.com/video/kUXuLZO7I5c/v-deo.html
How best to install the anthenna wires on the motor
Awesome idea
how can it stand on its own?
Great design and skills very impressive where can you purchase the rollers and hinges please ...
Nice design
I like this kind of gate👍
From which city ?
Great video by the way !
Does the ground have to be level on both ‘axis’ ? I hope that makes sense… I think yes ? Can there be any little tolerance on differences ?
Leveling is crucial.
Very impressive work. I had a similar idea but the rail would be below the surface of the drive. What stopped me was the debris that may have collected in it causing problems.
This is also my problem. If we make it on the road surface, I think there'll be another problem such as bending, etc.
Do you have the solution?
How to fit motore rock in gate pls tell me
Brpe kos semua buat pagar x termasuk autogate mtor?
Estoy en República Dominicana. Necesito comprar las ruedas para construir mi portón
Wish they have same quality work here at Philippines..
น่าจะมีปัญหาเรื่องน้ำขังหน่อยนึง เพราะรางสูงกว่ากระเบื้อง
impressive , Ideal good
Good day sir, how much will it cost to construct and install?
Regards
What is the minimum size of last door can do.sir? For example carport is only 4M x 3M (9'x12') thanks in advance
30 feet me ho sakta he kya
Would you please tell me how to calculate the track corner!!
ua-cam.com/video/yhMs-OrUjfU/v-deo.html
@@yu3320 there is 2 part of my gate, each size is 6.6 feet.so what should be the track corner radius?
@@anikhs5405 3'
Dear Friend Could you please tell me what exactly the Overlap should be maintain
Very good Bt one question that why one rack patti is not touching second
At the time of moving on radias
what type of hinge was used? can you share pls @yu3320?
ua-cam.com/video/kUXuLZO7I5c/v-deo.html
Is there anyone installing this in Dallas, Texas USA?
If we give the measurements of our gate u can give me the details of each block
Can you supply the material with motor
exelent work 👌.Regards from 🇵🇱
Work ..without PPE ?
Very good . May i use your video to explain to customer ?
Nice
What type of material Used in this
Gate
please tell me: 3'= how many meters?
3 feet = 0.914 meter. (Around 1 meter)
1 meter = 3.28084 feet
@@yu3320 Thank you so much. I really appreciate your technique and skills.
Amazing
What is the lenght and width of every panel? And why is the last panel is bigger?
How much is the Quote for witdh 570 cm and hieght 235 cm please provide me the price labor & material
can you explain the track bending in details, what is the dimension ?
ua-cam.com/video/yhMs-OrUjfU/v-deo.html
What if rocks get underneath those wheels any issues
You can get 4wd versions 👍🏻
Boss size kya he gate ki
how long is the fence box distance ??
ua-cam.com/video/yhMs-OrUjfU/v-deo.html
Hi, where I can buy turning wheels online. My rail track should be 14mm diameter.. Thank you in advance
Aliexpress LPsecurity
Wheels are adapted for this bespoke made Gate. I buy mine on eBay
Do you have a location and website.
How to get the wheels and what is the cost for such size slide folding gate. Without motor.
Good day . Can i buy one of those gate . can you ship?
Model engselnya kaya apa si
How I contact you?
Is the company in philippines?
No
how much this kos??where are you operate? how to contact?
How much cost that gate
Todo bien pero ocupen mascara de soldar
What name this moter?
Do you ship to the United Stated?
Very impressive. Where we can get these type of motor.
I have a automatic motor
@@bishalthapa208 where are you located?
Bhaisepati lalitpur
Area in Dasmarinas Cavite i need the total amount Labor & Materials am interested
Cool
Stainless materials pls quote
Nice. In the UK that would be a £20,000 install any day.
whattt !? what an expensive 😱
in Ina about Idr 15/25 million or £1000/1500
Bagus..ngemeng2 bengkel mana yaaa
Where
can U give me link or product code of hinges this gate ?
thanks before
Thee hinges are custom made
I have just bought 4 of amazon
Nice, would be more help if materials were included
What size is the tube that frames the panels?
Ada contact area semenanjung tak
Maaf! Semenanjung tiada, saya dari Sarawak.
Sir anong mga materyales ang gamit nyo po? at magkano po ba ang budget nito?
Swivel wheel will be damaged in less than 1 year, then have to replace all at once coz other wheels are failing too. Derailment is a headache. Nice design but obviously not sustainable. I regret with mine, which is a half folding gate only.
What is the price
I like that one, how much for installation here in Cainta Rizal
Awesome
LOL, if not locked at the end, you can simply lift it off the rails and push it inwards. Gate will fold a little and bracket will not hold it...