Amazing video. We would like to show this video on our channel with your permission. We will add your link and your name will also be mentioned in the video. Let us know what you think
su trabajo exelente ,su seguridad muy pero muy mala .le aconcejo que por lo menos use una careta de soldar ..con el tiempo se dara cuenta que era necesario
Buen trabajo mi única objeción es q el soldador no utiliza los elementos de protección necesarios para protegerse de los rayos y chispas de la soldadura
@@davidnettleton3375 maybe the "plans" were drawn for the sake of the video? In relation to "dangerous", have you ever seen a loft bed? Of bunk bed? The ladders used for those are even more vertical, however people still manage just fine 🙂 Atleast I did when I was a kid. Anyway, all I was saying was, if you look see it as scary/ dangerous, just be careful and you'll be safe 😉👌🏼
The stairs *do* match the plan. It is probably that you (and I as well) figured the long side would be the 'run' and the shorter measurement would be the 'rise'. If you look closely at the completed stairs (21:32), those two measurements were flipped. Probably so the stairs wouldn't pass in front of the window. Safe? Heck, no. But, he probably doesn't have codes and inspectors to worry about.
I like the safety slippers and welding sunglasses. Also a good thing that the music wasn't annoying at all. Would have been horrible if you chose only one track and repeated it over and over again. On a serious note: -You should add a handle so you don't risk pinching your fingers. -You should add a support to the wall for the upper outer part of the stairs to rest on when it is extended. -You should add gas dampers which can take some of the load so its easier to extend and retract the stairs.
Excellent travail, mais j'y met un bémol. Je trouve les marches trop haute par rapport à leurs largeurs. Pas faciles à gravir pour des personnes âgées. Cela resye assez raide à monter. Mais la réalisation est impeccable.
இவர் எந்த கேள்விக்கும் பதில் அளிக்கவில்லை. நீங்கள் தமிழில் எழுதினால் அவர் அதன் ஆங்கில மொழி பெயர்ப்பைப் புரிந்து கொள்ள வாய்ப்பு இருக்கிறது. ஆனால் தாங்கள் எழுதிய தங்கிலீஷை கூகிளால் மொழி பெயர்ப்பு செய்ய முடியாது.
Good idea but you couldn’t pay me to actually use them. I love that welding technique. Glob and grind. You understand penetration or weld reinforcement? If you’re grinding smooth you need a good chamfer so that your weld reinforcement is still there. Tacks and grind smooth is like .005 material left to support your load.
'building standards ' These aren't built in stairs. It is a custom ladder that you've merely attached to the wall for convenient fold up storage. This design is crap, but a few simple adjustments would make it quite safe and useable. Built in stairs are just that, built in and part of the structure, they don't fold up and aren't removable.
Buen trabajo , pésima seguridad el tiempo de trabajo le pasará factura el detalle w no me gustó es q las bisagras son atornilladas con el tiempo y el uso se aflojaran sugerencia q fueran soldadas
Overall, this is a highly informative and enjoyable video for anyone interested in fabrication. It showcases your talent and expertise while providing valuable insights and inspiration to fellow enthusiasts. Keep up the great work, and I look forward to watching more of your content in the future 👍👍👍
Amazing video. We would like to show this video on our channel with your permission. We will add your link and your name will also be mentioned in the video. Let us know what you think
Thank You For Supporting The Channel
su trabajo exelente ,su seguridad muy pero muy mala .le aconcejo que por lo menos use una careta de soldar ..con el tiempo se dara cuenta que era necesario
Gracias tecnico x las ideas es un muy buen video solo quisiera saber el calibre de del tubo y dios te bendiga siempre y saludos desde peru
اللهم صل وسلم وبارك على سيدنا محمد وعلى اله وصحبه اجمعين
عملك ممتاز جدا واصل سيدي الكريم
Buen trabajo mi única objeción es q el soldador no utiliza los elementos de protección necesarios para protegerse de los rayos y chispas de la soldadura
👏👏👏 parabéns pelo seu trabalho tá lindo 👏👏👏
Je to hezké, ale proč to zábradlí není až nahoru k poslednímu schodu?
👍
Asi chce rozbit pysk
👌🏻👌🏻👌🏻Wowww brilliant your working and vedio capturing...
👍
The plan at the beginning showed the stairs ascending at a 45 degree angle, but the final result was MUCH steeper. Looks very dangerous to me.
Plenty of steep stairs out there. You just be careful every step ohk 😊
@@Nath-sn1mv No. Not okay. Besides, my point was why doesn't the finished product match the plans?
@@davidnettleton3375 maybe the "plans" were drawn for the sake of the video?
In relation to "dangerous", have you ever seen a loft bed? Of bunk bed? The ladders used for those are even more vertical, however people still manage just fine 🙂
Atleast I did when I was a kid.
Anyway, all I was saying was, if you look see it as scary/ dangerous, just be careful and you'll be safe 😉👌🏼
The stairs *do* match the plan. It is probably that you (and I as well) figured the long side would be the 'run' and the shorter measurement would be the 'rise'. If you look closely at the completed stairs (21:32), those two measurements were flipped. Probably so the stairs wouldn't pass in front of the window. Safe? Heck, no. But, he probably doesn't have codes and inspectors to worry about.
I like the safety slippers and welding sunglasses. Also a good thing that the music wasn't annoying at all. Would have been horrible if you chose only one track and repeated it over and over again.
On a serious note:
-You should add a handle so you don't risk pinching your fingers.
-You should add a support to the wall for the upper outer part of the stairs to rest on when it is extended.
-You should add gas dampers which can take some of the load so its easier to extend and retract the stairs.
Like your sarcasm.
@@chakravarthy68plus a "UV" tan to die for😂The old saying "A little knowledge can be dangerous"
🎉It's not boring to watch. The music fits the video, doesn't make me sleepy 👍
Thanks
There is an option to down the volume ! You Can; just do it.
Sir your very talented fabrication can i have pavor where you get 1.6 mtr?
Please like share and subscribe to support the channel
Cómo le haces para que no se doble o pandee el tubo principal? Porque yo hice y sí se dobló un poco.
Gracias
Thank You For Supporting The Channel
I like that music,wow😝😝👍
Very good 👍❤ I like it technique guru
Thank You For Supporting The Channel
Lepo, kaj pa krožne stopnice.?
👌
سلام بسیار زیبا و ماهرانه ❤️❤️❤️
No usas careta para soldar?
la idea esta bien... supongo que no tenias mucho espacio para los pasos porque quedaron muy elevados.
Please like share and subscribe to support the channel
What sizes are your tubular?
😃
What is the name of the material used?
Excellent travail, mais j'y met un bémol. Je trouve les marches trop haute par rapport à leurs largeurs. Pas faciles à gravir pour des personnes âgées. Cela resye assez raide à monter. Mais la réalisation est impeccable.
Cela reste*
Thanks
Хорошая работа!) привет из России)
Excelente Felicitaciones de Venezuela Caracas 😅
Thanks
how to calculate the angle of inclination of the laddder
sir neenga potta kanakku yenakku purila theliva sollamudiyuma nanum welder udhavi pannunga
இவர் எந்த கேள்விக்கும் பதில் அளிக்கவில்லை. நீங்கள் தமிழில் எழுதினால் அவர் அதன் ஆங்கில மொழி பெயர்ப்பைப் புரிந்து கொள்ள வாய்ப்பு இருக்கிறது. ஆனால் தாங்கள் எழுதிய தங்கிலீஷை கூகிளால் மொழி பெயர்ப்பு செய்ய முடியாது.
Good idea but you couldn’t pay me to actually use them. I love that welding technique. Glob and grind. You understand penetration or weld reinforcement? If you’re grinding smooth you need a good chamfer so that your weld reinforcement is still there. Tacks and grind smooth is like .005 material left to support your load.
Please like share and subscribe to support the channel
3rd wold country solution. lol
Where are you based ??
Very ingenious stair, however I think that when is not deployed should be some protection to avoid dangerous fall by distracted people.
Thanks
Very cool design. Very bad music.
We don't need to watch every single screw being installed. Hi-speed playback is a friend to all.
Please like share and subscribe to support the channel
Good Jobs 👍 Support to your Channel 🙏
Cool, interesting process 😁😁😁
Please like and share subscribe to the channel ,thank you💕
Ficou linda irmão se pudesse ter havido um pouco mais o ângulo ficava mais fácil de subir e descer mas a obra está muito bem executada
Thanks
No proper demo on its folding up. Does it really work?
Please like share and subscribe to support the channel
Good work, creative...👍💥 and good wideo &sound for fast gone sleeping 🥴
How to cost calculating for this sidi
quite good , but building standards would have a screaming blue fit if you did that here .
'building standards ' These aren't built in stairs. It is a custom ladder that you've merely attached to the wall for convenient fold up storage. This design is crap, but a few simple adjustments would make it quite safe and useable.
Built in stairs are just that, built in and part of the structure, they don't fold up and aren't removable.
@@ModelLights and relax ...
@@tomthompson7400 LOL @ the guy with his panties in a knot over building standards telling me to relax..
Thanks, I'm fine.
@@ModelLights when a wise man points at the stars
only a fool looks at his finger ...
; }
@@tomthompson7400 when an ignorant fool wants to distract from silly mistakes, he uses silly 'profound quotes' as distraction.
Agar hume bnvana he to kitna price hoga
Why,why only spot welding???
Thanks
The video was very good but change the audio please
Thank You For Supporting The Channel
your videos are very useful. may i upload and share it to my facebook page? thank you.
ok
Can you tell me the how to calculate dimensions
Thank You For Supporting The Channel
he doesn't care. $$$
amazing, music too loud
Buena musica asi trabajas calidad🎉🎉
Nuevo Suscriptor gracias por compartir
👍
Sensacional!!! Parabéns 👏 👏 👏
Alguem sabe me dizer a medida dos Metalon??
Bien! Pero son demadiado altos y cortos los escalones
Show parabéns 👏👏👏
From whear we can get it
Excelente, gracias
El trabajo en la escalera muy bueno, pero qué pena que queda debajo de la puerta de ingreso.
👍
Y?
buen sistema... pero los escalones son muy altos y muy angostos.no es practica.
Excelente video...
La contra huella quedo un poco alta
👌
Great job 👌👌👌👍👍👍
Its available in tamil nadu?
Thank you for watching and subscribing to the channel.
Buen trabajo , pésima seguridad el tiempo de trabajo le pasará factura el detalle w no me gustó es q las bisagras son atornilladas con el tiempo y el uso se aflojaran sugerencia q fueran soldadas
👍
Trabalho bem caprichado e calculado na medida
👍
Great work👍
Parabéns pelo seu talento ! Genial ! Engenheiro das escadas .
Put wheels(and motor) on it and you have a WINNER !!
Video için teşekkürler. mükemmel.
Great work 👍 👍
ua-cam.com/video/C2WZIBWXKs8/v-deo.html
Please like share and subscribe to the channel ,thank you
Ficaria perfeito sem a música, de resto parabéns!
👍
sắt hộp 3x6 hay 2,5.x5 vậy ạ
Amazing video
Thanks
перила в верхней части нужно удлинить 👍
👍
Нахрена? ... Он же ни чего не знает про существование ГОСТов, где высота 50 см требует наличия поручней ... я уж молчу про травмоопасную конструкцию
Mantap bos ku menambah wawasan dan ilmu pengetahuan
Nice job
Thank You For Supporting The Channel
Perfeito, ótimo trabalho
thanks
Lo felicito con esa escalera pero dos cosas los tornillos no me convence y el pasaje mano deverias ser asta el final el resto está excelente
Thank You For Supporting The Channel
Everything was fine, until I started listening to that annoying music, which ruined the whole video, in my opinion
You can mute the recording
that music was soo bad 😂
Bên mình có làm bán cho khách ko bạn
What A BRILLIANT!!
Thanks
Anyone has a guestimate in how much for materials this would cost? I'm just curious.
youuu may wanna guestimate the max load .... wich i place around twig .... mabe twice before the steps break apart
너무나 멋있습니다.영상 감사합니다.
Please like and share subscribe to the channel ,thank you
Cost kya h
Good video Like it Thanks for share it ❤❤❤
Thank You For Supporting The Channel
Mais um inscrito.
Don’t know what price they are but they look a bit steep to me!!
👏👏👏👏👏💯👍great
ua-cam.com/video/C2WZIBWXKs8/v-deo.html
💕
Parabéns excelente trabalho
Belo trabalho
👍
Very nice work
ua-cam.com/video/C2WZIBWXKs8/v-deo.html
❤
아이디어가 참 좋습니다~^^
Please like and share subscribe to the channel ,thank you
فكره رائعه وأهلا بكم
Good job
Very nice 👌👍
💕
Ascondes las medidas y los angulo chaval....
Good idea sir
Ficou show
Good work
Tiene la huella muy pequeña.
nice
Please like share and subscribe to support the channel
good job
Thank You For Supporting The Channel
Dios te bendiga
❤
LO UNICO MALO FUE QUE LA CONTRAHUELLA QUEDO MUY ANCHA Y POR ENDE ES UNA ESCALERA MUY PESADA PARA SUBIR Y BAJAR
Overall, this is a highly informative and enjoyable video for anyone interested in fabrication. It showcases your talent and expertise while providing valuable insights and inspiration to fellow enthusiasts. Keep up the great work, and I look forward to watching more of your content in the future 👍👍👍
Thank You For Supporting The Channel