Slide Folding Gate | Measure

This video shows you how I measured the size of the slide folding gate.

[@luckysakonta2718]

The music is 👌🏾👏🏽👏🏽, Thanks fir the excellent video👊🏽

[@iansodyssey]

If im inside. Is the gate will be able to withstand if i will push it from the inside ?

[@smarticiot4680]

You can add flexible rubbers in between the gaps to seal it

[@rafaelbrea6743]

Nice video 👍👍

[@zohaibmajeed6931]

What would be the cost of installation including everything for 10 feet width of gate.

[@farhaddanesh4510]

Thanks for helping other trade
My question is when gate in close in windy days, is it stable?

[@7meekah]

Thank you for this video

[@__Mr.Hakim__]

Is it optimal for panel size using the tangent of rail radius?

[@Maurice05]

Is there a way this would work if the concrete were level on both sides where one side has a 5 inch slope over 20 feet

[@JoseRodriguez-oc5xo]

Un excellent video grasias por compartir

[@gurdeepsinghkapoor7243]

HIGHLY APPRICIATE FOR SHARING ....THANK YOU ♥

[@GH-qi1wv]

This can resist snow. ??

[@chanchhaychhadanoun7125]

what is the longest in length could it stand without falling?

[@greentea5644]

谢谢分享，很用心做的一个视频。

[@yu3320]

謝謝🙏

[@srinivasak5967]

Very nice

[@njayachandrann]

What is the motor specifications and how much does it cost?

[@aramarcaida9946]

Very nice gate. May I know the thickness of the gate please? Thank you.

[@yu3320]

2“

[@steeltech5755]

ua-cam.com/video/1up7rYevdlc/v-deo.html

[@nugy1212]

hello I'm trying to make a door like your video the same problem with the door hinges and wheels. I want to know the construction of the hinges and wheels. thanks

[@willietan79]

how to setting limit open and close the gate? have manual book. Thank's

[@Kelvin-oq1rp]

hi....are you based in Kuching? how can i contact you?

[@PhoePhoeLay-n6j]

Nice thanks

[@tiennguyensi4776]

Convinced by this gate

[@RonnAntazo]

Good day, How did you install the wheels? Thank you

[@shoussen]

very nice idea, but how the " d " is calculated? why do you put it at 2'? thanks

[@yu3320]

Of course, the bigger d is the better, so that it goes smoothly. My gate panel is 3’, so d is 2’ which is ideal. If the gate penal is smaller, then d can be smaller.

[@shoussen]

@@yu3320 thanks for your answer, do you have a website?

[@clivemukucha1714]

how long is your "a" in metres, am assuming your length is in "feet", making it around 5.48metres

[@yu3320]

yes, around 5.47~5.48 m. for each around 1 m

[@kreasiumum]

Terima kasih vidionya

[@sevenhillsengineering470]

What is the measurements of the motor and gate height and width

[@erwinjasonlim9395]

If I have a=4.3M and f=5M is it still possible? I know from your formula it doesnt work. Do you have any advice?

[@yu3320]

not enough space.
"a=430 & f=500"
you can try
b=53 (x 8 panel)
d=30
e=16 (depend your automatic motor size)
c=99
a+c=529 (f is still 29cm longer)

[@rodrigoazubel]

Hi, how narrow or acute can the corner curve be? Thank you

[@yu3320]

Radius 2'

[@ajaycsenit]

What is the weight of the gate? How much the motor cost ?

[@56smooth]

What is the radius of the 90 degree bed please?

[@arturogallegos8830]

Nice. Buen jale. Con 17 pies puedo trabajar con tres Pamela como 5’ 8’’. Y 6 para la curva gracias de ante mano

[@arturogallegos8830]

Panels

[@juanmeza1888]

Where could I buy the swivel wheels?

[@kohlenmoonsamy3581]

Hi, can panel's be made 1 metre each? Will it still work?

[@AUTOMATIZACIONES-ASISPORT]

👍

[@faustoguaman2613]

Me interesa el sistema y bonito el modelo de la puerta

[@percyclemen7602]

What if my a= 160inches how will i compute? Can u help me how to get the d?

[@yu3320]

d=40" x 4 panel (if f Enough space)
d=32" x 5 panel (if f not enough space)

[@percyclemen7602]

Where can i buy the hinges? Or do i need to assemble it?

[@percyclemen7602]

@@yu3320 So a = 160inches ; b = 40" (4 panels) ; the D is the track corner right?

[@percyclemen7602]

@@yu3320 Where can i buy the hinges? Or do i need to assemble it?

[@yu3320]

@@percyclemen7602 yes

[@s.b.4567]

Hi I am very impressed of your gate design. Would it be possible to get in contact with you for buying some parts or some technical drawings for a gate with the measurements of my driveway? Thanks in advance!

[@keerthivasan4006]

Sir i am India. I have one doubt for this gate --one panel to other panel Gap ?

[@pablolynch1152]

The gap size is clear, you can see through it.

[@short-328]

@@pablolynch1152 contect no

[@1faulk]

Does anyone know someone in the Philippines who can do this type of work? Lipa City Batangas

[@johnpauladante9875]

Sir kami po nagawa ng ganyan.

[@johnpauladante9875]

San jose batangas po location namin. Ante's iron works po pangalan ng shop.

[@1faulk]

@@johnpauladante9875 thank you so much

[@26aaluminium93]

สนใจครับ

[@mohamedlakoud1833]

Slide folding Gate measure trauction francais

[@johntotetwoo]

do you have issues on roller jumping in its track?

[@Kozlaranton]

3΄ how meter is? 🙏

[@yu3320]

3' round 91.45cm

[@Kozlaranton]

@@yu3320 🙏

[@rodrigues2011rodrigu]

Where can I buy the rollers and the hinges in Europe?

[@robbysamosir6113]

Ok up

[@sureshsonawane3078]

AAPKA WORKSHOP KAHA HAIN AAPKA MO NO DENA MUJHE GATE BANANA HAIN

[@anandnalawade2563]

I am india please send dimetion sir

[@irshadchaudhari7811]

Mujhe inka mobility member cahiye

[@steeltech5755]

STEEL tech

[@kingnastv7193]

Have contacts number?