How to replace SWAY BAR BUSHINGS AND LINKS 2011-2016 hyundai elantra/sonata
Вставка
- Опубліковано 25 лют 2023
- Track: Jarico - Island
Music Provided by Magic Records
Listen To The Original:
• Jarico - Island (...
Free Download: fanlink.to/g3JJ
Usage Policy: www.magicmusicLLC.com
Do more videos. You are great mechanic teacher.
NICEE
Can you guys features 2001 santa fe bushing replace
👏
You commented that bad struts lead to bad sway links and sway bar bushings.... Shouldn't the struts be replaced as well? Also noted that the torque settings for the sway links were not mentioned. What are they?
You probably have an answer by now; but it's 75 ft⋅lb
That worn out bushing reminds me of my ex. 😅
You did okay for being an amateur!!!
3:59 😂 Getting access to the two back bolts on the heat shield isn’t as easy as you said Yuri. Maybe if you have it up on a lift
…for a 2011 Elantra limited. Bolts are 17 mm
Ok. The work-around for a 2011 Elantra limited is: 1. Remove the 10mm bolt from the front side of the heat shield. 2. Ignore the two inboard 17mm bolts. 3. Bent the heat shield upwards until you have access to the nut on the bushing bracket.
@@michaelmartin6966 Thanks for the info.
Jaxk stand under a very soft rocker panel 😂
jacks should be in the location near the tire for this car according to the dealer service repair manual. perhaps too far down passenger side and not close enough to the tire. there is arrows indicating where
@Monkton Trimble i do the same. i put them under the control arms
😂😂😂😂😂😂
👏