Thanks 12voltvids! Thanks to you I was able to repair one of my 2 evs-1000e recorders. The power supply is almost the same with the same problem. Replace caps and everything works again. And I thought it was a mechanical / head problem. I had already given up.
I've messaged you in the comments about these before when you showed the other Hi8 deck with the motorised control panel (EVS7000) - this would look neat with my E80/N80ES amps. Amazing looking machine.
@@12voltvids If I were able to pick one up for less than £100, I would do so and attempt to fix it. Here in the UK, the capacitor plague seems not to be as harsh on equipment, but it still makes me nervous about throwing money at nostalgia. I did get an SLV-E1000 VHS deck *cheap* this week as a cheap birthday project - once I've gone through that I'm sure I'll have the opinion of "man VHS video is terrible." And then never use it again.
The ev s3000 was the best as far as transport go as was designed by Sony. They later when with the Memorex mechanism yes was designed by Memorex on the EV-S7000 and later which spindles crack and due to metal embedded in spindles. Memorex embedding a metal core with plastics not accounting for differential in expansion / contraction when the device goes to heat and cold cycle during operation, that why they fail pretty much a 100% failure rate. This is the one to get for transfers once capacitors replaced and alignment is done of course.
Yes the 3000 is good. The 5000 and 7000 all have the cracked spindle issue due to the metal insert on the hub. The concept was the magnet and disk would provide the perfect tension for the take up spool. The 7000 was much more gentle on tapes than other decks and had time code as well as afm stereo sound and pcm stereo sound.
I got a Sony TA=FA 3ES amp. Bought it new back in the day. It has a few of these bright red Elna caps in it (not the silk ones). Up until now they all test fine and the unit still works without issues. Maybe because I still use the unit regularly. I don't know. I will see how long it will keep going..
My technician role as a "maint engineer" years through the 1980s had me watching 1st hand the MASSIVE electrolytic fiasco that saw the seal around the capacitor leads to the aluminum body just was not up to it. The amount of Broadcast Studio equipment that had run only a few hours effectively and was destroyed from cap leakage juice. Studio Cameras, Sony Digibeta VTRs to daring to power down kit in the CAR ( central apparatus room) to relocate it etc would detonate their SMPS at power on. So much waste!
hi dave these ones are also known for leaking caps i got two of them same issues along with loading problems i repaired and the oem remotes are next to impossible to find
Yes I am fully aware. Did about 50 or so in this one. There is another part forthcoming for the TBC and preamp board. A warning to anyone that buys one of these, they need to be totally rebuilt and it takes hours to do.
@@TechnicFreakJulian I would hope so, but I don't do much work on newer stuff and likely won't because I am not in the business any more. I am pretty selective what i work on.
A customer gave me this machine. It powers on but none of the function buttons (play, FF, etc) work. I can’t even get my “work” tape to eject. Is this machine worth repairing?
@@12voltvids Thanks for your answer. I’ve been in the video transfer business just over 4 years now. I’m a novice about tape machine repairs but your videos are educational and entertaining. So, thank you for videos! I don’t need this Sony 3000 for work. I just wonder what an expert’s thoughts would be. If the customer is going to throw it out, I’ll save it for parts or something.
@@briansexton8047 the 3000 is one of the better machines when working. Does not have the cracked gear issues that the 7000 and 5000 had. Caps need changing in TBC but other than that they are solid and have the digital PCM audio option.
oh btw , im curious are you able to fix dc dc pcbs in camcorders ? i have a minolta pro 8 918 (the super rare 2 ccd) hi8 unit my problem is that the capstan signal from the cxa cpu goes through the dc dc board and dies off there , initially the tape runs then the capstan slows and then dies
I wonder if all those audio fanatics installing Elna Silmic caps in high-end gear are screwing themselves. (For those unfamiliar with SILMIC caps, they have spider silk in the electrolyte.)
I don't have a choice of brand. I get what the shop has. Good? Bad? Couldn't tell you. Don't care. If they fail in a few years they get replaced again.
Hello. I own the same player and the drivetrain is very poorly made! Remember this was the biggest consumer 8mm player. Mine has a small fault in the drivetrain that prevents me from rewinding one way with picture I have a loose drive train and it is CHEAP made!! But I switched to digital 8 which sony released. the camera was the same as regular 8mm but digital video
Digital 8 cameras had bad silicon. Very low resolution sensor. SUNY did this do make the picture poorer than the more expensive DV. I connected a digital 8 recorder to my evw300 and that was amazing.
@@ford1546 I have a trv110 and 2 730. The CCD is good for about 230 lines. The tape will record about 500. The DV cameras and even hi8 were good for 500 (Hi8 tape could handle 400) . Sony crippled, whoops bad choice of words now in this PC world! Sony "limited" the capability of digital 8 because they didn't want professionals and news people using 500 cameras. So they made the picture basically on par with VHS cameras and those wanting higher quality would buy DV cameras.
![[UA] NAVI vs MOUZ | BO5 | IEM Rio 2024](http://i.ytimg.com/vi/CMBYk0cbGoA/mqdefault.jpg)
Thanks 12voltvids! Thanks to you I was able to repair one of my 2 evs-1000e recorders. The power supply is almost the same with the same problem. Replace caps and everything works again. And I thought it was a mechanical / head problem. I had already given up.
Very nice machine. Worth saving!
It would be welcome in my digitizing studio. Once rebuilt they are work horses.
I've messaged you in the comments about these before when you showed the other Hi8 deck with the motorised control panel (EVS7000) - this would look neat with my E80/N80ES amps.
Amazing looking machine.
These are good machines except the bad caps and much easier to work in than the evs7000.
@@12voltvids If I were able to pick one up for less than £100, I would do so and attempt to fix it. Here in the UK, the capacitor plague seems not to be as harsh on equipment, but it still makes me nervous about throwing money at nostalgia.
I did get an SLV-E1000 VHS deck *cheap* this week as a cheap birthday project - once I've gone through that I'm sure I'll have the opinion of "man VHS video is terrible." And then never use it again.
The ev s3000 was the best as far as transport go as was designed by Sony. They later when with the Memorex mechanism yes was designed by Memorex on the EV-S7000 and later which spindles crack and due to metal embedded in spindles. Memorex embedding a metal core with plastics not accounting for differential in expansion / contraction when the device goes to heat and cold cycle during operation, that why they fail pretty much a 100% failure rate.
This is the one to get for transfers once capacitors replaced and alignment is done of course.
Yes the 3000 is good. The 5000 and 7000 all have the cracked spindle issue due to the metal insert on the hub. The concept was the magnet and disk would provide the perfect tension for the take up spool. The 7000 was much more gentle on tapes than other decks and had time code as well as afm stereo sound and pcm stereo sound.
To answer the title question before watching, I am compelled to reply "yes" 'cause you. Real talk. It being a Sony doesn't hurt either.
love love love your work.
Oh crap that's going to take a lot of work, the owner must really realllyyyy want it fixed to pay for such work
It was. Owned by a business that archives tapes. So it is a business expense.
Great job today !
I got a Sony TA=FA 3ES amp. Bought it new back in the day. It has a few of these bright red Elna caps in it (not the silk ones). Up until now they all test fine and the unit still works without issues.
Maybe because I still use the unit regularly. I don't know. I will see how long it will keep going..
Silk in a capacitor. Now that was a bad idea.
Wow, are you doing a VCR repair marathon?
Got a bunch of VCRs from a company that does video archiving.
@@12voltvids Jackpot!
yeh the usual , capacitors in the head amp and mainboard , very fixable tho :)
My technician role as a "maint engineer" years through the 1980s had me watching 1st hand the MASSIVE electrolytic fiasco that saw the seal around the capacitor leads to the aluminum body just was not up to it. The amount of Broadcast Studio equipment that had run only a few hours effectively and was destroyed from cap leakage juice. Studio Cameras, Sony Digibeta VTRs to daring to power down kit in the CAR ( central apparatus room) to relocate it etc would detonate their SMPS at power on. So much waste!
Yes they were bad. Hundreds of tiny time bombs ready to go pop at any time.
hi dave these ones are also known for leaking caps i got two of them same issues along with loading problems i repaired and the oem remotes are next to impossible to find
Yes I am fully aware. Did about 50 or so in this one. There is another part forthcoming for the TBC and preamp board. A warning to anyone that buys one of these, they need to be totally rebuilt and it takes hours to do.
@@wendellporter4875 This one has it in the box.
Skimming through the video and seeing those SMD electrolytic caps in a 1990s era Sony.
Reaction: 😬
Yup they all bad.
@@12voltvids what about today's smd caps, are they any better?
@@TechnicFreakJulian I would hope so, but I don't do much work on newer stuff and likely won't because I am not in the business any more. I am pretty selective what i work on.
A customer gave me this machine. It powers on but none of the function buttons (play, FF, etc) work. I can’t even get my “work” tape to eject. Is this machine worth repairing?
These were good machines.
@@12voltvids Thanks for your answer. I’ve been in the video transfer business just over 4 years now. I’m a novice about tape machine repairs but your videos are educational and entertaining. So, thank you for videos! I don’t need this Sony 3000 for work. I just wonder what an expert’s thoughts would be. If the customer is going to throw it out, I’ll save it for parts or something.
@@briansexton8047 the 3000 is one of the better machines when working. Does not have the cracked gear issues that the 7000 and 5000 had. Caps need changing in TBC but other than that they are solid and have the digital PCM audio option.
Can you measure those caps without removing them from the circuit?
ESR can be measured in circuit
@@12voltvids Does it matter if the caps are in parallel or in series with others?
@@walle637 caps in parallel will skew your reading slightly but you still get an idea if they are any good.
oh btw , im curious are you able to fix dc dc pcbs in camcorders ? i have a minolta pro 8 918 (the super rare 2 ccd) hi8 unit
my problem is that the capstan signal from the cxa cpu goes through the dc dc board and dies off there , initially the tape runs then the capstan slows and then dies
I have fixed them in the past but avoid old camcorders like the plague.
hows the video called where on that vcr in the intro it went boom and on smoke while it was playing?
It was staged. For intro.
@@12voltvids I had that happen to a Grundig vcr when I plugged it in after like 20 years in storage. It just went puff and smoked. Those stupid caps 😂
Unbelievable. Power supply AND caps gone to mush. 10-15 bad caps, minimum. That's a record, for me.
More than 50!
👍
I wonder if all those audio fanatics installing Elna Silmic caps in high-end gear are screwing themselves.
(For those unfamiliar with SILMIC caps, they have spider silk in the electrolyte.)
They use will as the dielectric and they do fail. They went bad on my luxman hybrid amp.
My vcr is not accepting tape technical said ic is burnt please tell me solution? Model is national NV-380
I got elna caps in something
...and now I'm worried
Me too and mine are a lot older and younger, nt sure if these were a bad batch...
A rare bird. Never saw an 8 mm deck.
There were a few. I have an Evs7000, evs5000 and a really old one.
So what is a good brand of capacitors then please
I don't have a choice of brand. I get what the shop has. Good? Bad? Couldn't tell you. Don't care. If they fail in a few years they get replaced again.
Nichicon, Rubycon, Panasonic
panasonic is really good
@@walle637 thanks for that
@@madpom2 i mean dave is right i’d prefer new caps over old caps any day. but i’ve generally noticed panasonic has SOLID quality caps
Every elna is a time bomb, it's like sony did this on purpose.
Cant even trust sony to do the right thing :-(
gee i have the same tv
I thought first it was the tv that needed a recap 😂
Hello. I own the same player and the drivetrain is very poorly made! Remember this was the biggest consumer 8mm player.
Mine has a small fault in the drivetrain that prevents me from rewinding one way with picture
I have a loose drive train and it is CHEAP made!!
But I switched to digital 8 which sony released. the camera was the same as regular 8mm but digital video
Digital 8 cameras had bad silicon. Very low resolution sensor. SUNY did this do make the picture poorer than the more expensive DV. I connected a digital 8 recorder to my evw300 and that was amazing.
@@12voltvids Ok. I did not know that. I did not use the Sony Digital 8 camera that much. Sony DCR-TRV120
@@ford1546
I have a trv110 and 2 730. The CCD is good for about 230 lines. The tape will record about 500. The DV cameras and even hi8 were good for 500 (Hi8 tape could handle 400) . Sony crippled, whoops bad choice of words now in this PC world! Sony "limited" the capability of digital 8 because they didn't want professionals and news people using 500 cameras. So they made the picture basically on par with VHS cameras and those wanting higher quality would buy DV cameras.
Lots of time in replacing caps🥵
Always those caps