Furnace Not Blowing Hot Air - Easy Fix
Вставка
- Опубліковано 4 січ 2019
- Is your furnace not blowing hot air? That may be a quick and easy fix. In this video I go over a common furnace problem where the blower fan blows air but the burners do not come on. Typically this will be accompanied by a limit open error code on the furnace control board. I also show how to test the hi limit switch and how to reset it if it is stuck open.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🔥 Furnace Repair Playlist:
• Furnace Playlist
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
For More Repair Videos:
🔌 Dryer Repair Playlist:
• Dryer Playlist
🧺 Washer Repair Playlist:
• Washer Playlist
❄️ AC Repair Playlist:
• Air Conditioner Playlist
💧 Water Heater Playlist:
• Water Heater Playlist
🛠️ HVAC Tools Playlist:
• HVAC Tools
🔋 Capacitor Playlist:
• Capacitor Playlist
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
📝 Tools Reference List:
The Best Flashlight:
amzn.to/2DLCYFx
UEI Multi Meter:
amzn.to/2MbSHC2
The Best Drill:
amzn.to/2MHLudO
Magnetic Drill Bit Set:
amzn.to/2ML0esn
Motor Hub Puller:
amzn.to/2LDntqx
Amprobe Psychrometer:
amzn.to/2K54Nvi
UEI Dual Manometer:
amzn.to/2NGmD9Q
R22 and R410 Refrigerant Gauges:
amzn.to/2uM1GDx
Refrigeration Wrench With Hex Bit:
amzn.to/2uM1MuT
SuperCool Slide Rule:
amzn.to/2QdbcZx
Ball Valve Refrigerant Hose Set:
amzn.to/2wSbETX
Low Loss Refrigerant Hose Set:
amzn.to/2wQazfy
HVAC Fish Scale:
amzn.to/2oRyI1O
Multi Tool Wire Stripper:
amzn.to/2Karthq
Magnetic Nut Drivers:
amzn.to/2tdEdKz
Knipex Cobra Pliers:
amzn.to/2tg4Rm2
2 Piece Crescent Wrench Set:
amzn.to/2A7aM2W
14 Inch Pipe Wrench:
amzn.to/2JP30tY
Magnetic Tray:
amzn.to/2Mc4Fv5
Screw Drivers:
amzn.to/2JUaGjw
Stubby 6 in 1 Ratcheting Screw Driver:
amzn.to/2mDwS3d
Stubby Magnetic Nut Drivers:
amzn.to/2NHDolh
Fuse Puller:
amzn.to/2MDSQz7
Flexible Drill Bit Holder:
amzn.to/2K4dgiO
Long Drill Bit Extension:
amzn.to/2JLCvFH
Angled Drill Bit Holder:
amzn.to/2Mbqc7r
Drill Bit Extensions:
amzn.to/2MbcbGC
UEI Temp Probe:
amzn.to/2K3E1UE
Zoom Spout Oiler:
amzn.to/2tctO1E
Hex Key Set:
amzn.to/2lp2bhO
DeWalt Drill Set:
amzn.to/2M940up
Wire Connectors Set:
amzn.to/2tqYn30
Wire Nut Set:
amzn.to/2tdgF8I
Voltage Pen:
amzn.to/2tq5t8d
Pocket Extendable Mirror:
amzn.to/2ytJzXr
Magnetic Jumpers:
amzn.to/2L1wPZN
Mini Alligator Jumpers:
amzn.to/2N067S1
Scotch Brite Pads:
amzn.to/2PH66E9
Nitrile Work Gloves:
amzn.to/2S4vZiT
Brass Brush:
amzn.to/2q3ndVF
Offset Screw Driver Set:
amzn.to/2pYDIlM
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🛒 For a Complete List of Tools and Parts Visit my Amazon Page:
amzn.to/2Q3QTOA
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🅿️ If you want to support the channel:
paypal.me/WordofAdviceTV
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
📷 Interested in What Gear I use to Film my Videos?
Sony A6300 16-50mm:
amzn.to/2OmLSPF
Sony 35mm Fixed Lense:
amzn.to/2LPAU3A
Extra Batteries:
amzn.to/3c8QBj1
Memory Card (2):
amzn.to/34rcwQ1
60" Tripod:
amzn.to/2mLXrU0
Bird-Eye View Tripod:
amzn.to/3b3RWYy
Rode VideoMicro Microphone:
amzn.to/2Ol9KDp
Rode Wireless Go Microphone:
amzn.to/3ed5Wkv
Neewer Halo Light (2):
amzn.to/2LTANUK
Viltrox LED Light Panel:
amzn.to/39ZbSu4
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🙏 We would greatly appreciate it if you considered supporting our channel while shopping on Amazon by buying anything you need on Amazon after clicking on one of the links above. This gives us a small commission at no additional cost to you and helps us continue producing more videos! Thanks a million for your support!!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
⚠️ Disclaimer:
This video is for educational purposes. All appliance and HVAC repair work should be done by a trained professional. Word of Advice TV is not responsible for any possible damages or injuries caused by the use or misuse of the provided information.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
📥 SPONSORS / Collabs:
Would you like to partner with Word of Advice TV? 🤝
Email: WordofAdviceTV@gmail.com ✍️
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
#furnace #wordofadvicetv #hvac #furnacerepair
⭐ More Videos That Can Help:
Top 5 Furnace Problems and How to Fix Them:
ua-cam.com/video/T4IWtKy--Vk/v-deo.html
Furnace Parts and Functions Explained:
ua-cam.com/video/gN-UIr6824w/v-deo.html
Thermostat Not Turning on Heat:
ua-cam.com/video/054cRskeh5k/v-deo.html
Blank Thermostat Screen:
ua-cam.com/video/vi3OJuGfaac/v-deo.html
Furnace Error Codes Explained:
ua-cam.com/video/J8Zegm4TClM/v-deo.html
Furnace Sequence of Operation (important to know):
ua-cam.com/video/AQD_MedIklI/v-deo.html
i have a problem when blower kicks in burner kicks off????
It is 2am. I noticed my house was getting cold the furnace wasn’t going. I am a single mom really struggling. My son is autistic it’s hard to get people in my house with him. I started to panic it’s freezing snowing. Your video I followed the best I could. My heat Is back on. Thank you so much for making this video you are a savior for me right now.
You know you could have just said thanks for the video, it worked... Instead of the sob story.
@@duMaurier15 how rude. As a single mom, sometimes we feel it is important to give a back story to show our level of appreciation. Be nice... it isn't too hard.
@@GadgetGirl.74 Sorry. Accept my apologies.
@@GadgetGirl.74 You were waaay nicer than most towards this "comment."
@@duMaurier15 Jesus, did you get up on the wrong side of the bed today? She's a single mom with an autistic son and you want to come on here and run your mouth? Have a better day buddy
This guy provides concise and informative videos. Probably the best on the Internet.
Woke up to a very cold house this morning, went down to have a look at my thermostat, sure enough worse nightmare specifically with the COVID-19 situation.. called a furnace repair company.. $245 for a technician to come out on the weekend... given the fact I been out of work for 2 + weeks now..
I would of probably just waited out until tomorrow if I didn't have my girls 7&3 years old home with their mom..
Started watching UA-cam videos after watching maybe 3-4 came across yours . tried everything step by step in this video for 2 times.. 3rd time the MAGIC HAPPENED...
Thanks to you I saved lot of $$$, and now our house is warm again.. great videos... keep up the life saving work.. you have a subscriber for life....
It was the first day of cool temps and my house was 63°F. I turned on the heater and sure enough it was blowing, but only cold air. I watched your video. I opened my furnace panel, I looked at the flashing lights, I correlated it to the diagnostic on the sticker of the inside of the furnace. I replaced the filter, I didn’t have to bang on the thingy, but I pulled the plugs out, and when I put them back in my heater started working! I am so proud of myself, and I only tried it because of how clear and easy your video was. Thank you! Single female, 10pm and I’m so happy.
Hey Jay...You are my Furnace Fixer HERO!!!! After watching your video it took me exactly 2 minutes to fix my High Limit Switch that must have been out over 6 months. Of course, I heard the fan blowing and all the switches and button worked so I felt I was good to go...and of course I purchased room fans. Your step by step educational video save me of $225...from a so call professional quote...and now my home is HEATED, in no time. That Tapping trick on the High Limit Switch was amazing...and your other video, on cleaning your burners with a wired brush was fantastic...my burners look like new. By the way, I have never touched my Furnace...didn't even know a blinking Sight light was even suppose to be on. You make me proud to be a Female fixer upper in my home...Thankssssssssssssssssssss a whole lot!!!!! Keep up the good work!!!!
Thanks to your honesty I got my furnace running. Praise God! I cleaned up the fire sensor and changed the igniter; reset one of the thermal switches and took the other one out and tapped it on the floor. Now I know I have to keep the filter changed. :)
You're the best, Today on Christmas my furnace gave up, I followed the steps you suggested in your video. Changed the filter, tapped the high-limit switch and it worked, I will still get it serviced. Thank you you're a life saver. God bless.
I would say this video is the most useful I get in years, considering how urgent it is having no heat in cold days. Clear symptom and instruction, thumb up!
It's rare to find a good honest repair guy. always appreciate it. Thanks for your simple and free advice!.
Saved my life this morning! With all this COVID stuff going on, we were really worried that we were going to have a service man come in to fix it. Found your video and had it up and running within 2 minutes of watching it! Thank you!!!
Mine is a Lennox furnace. The lights are green and red, alternating slow flashes (1 per second) to indicate a problem with this switch.
Change your filter!
I know this video is 3 years old. However, I followed the steps in this video and got my furnace working again. My upper limit was open, and I changed the air filter, but it still didn't work. Gave the sensor a few taps with the screw driver, and Voila it's working.
Saved me at least $80 for a service call. Much appreciated 🙏 ☺️
This is our second time to have to refer to this video to fix our furnace. It’s been a couple cold seasons now since we fixed it the first time. It has been so helpful. Saved us a service call and cost of repair! Thank you so much for this wonderful tutorial!
Excellent breakdown for diagnosing and testing limit switch issues! $10 part is much better than a service call. Thanks for the video.
You are amazing, clear, concise, and to the point. The envy of some companies (not all) who take advance of innocent non-knowledgeable home owners. Thank you for this and other informative videos, helped me immensely as I’m sure others. Thank you! Subscribed!
You are welcome! Thank you for the positive review! 😄 I'm glad to hear that the videos have been helpful for you and appreciate you subscribing. Stay warm and have a Merry Christmas!!
You are a lifesaver for me, twice!! Again, today my furnace was blowing cold air. Followed your steps and the problem is solved. In addition to your steps, I'm glad u mentioned what could be causing this. Checked my filter and it looked exactly the same and then I remembered that my wife had gotten few new jars of a candle which we have burning. Time to have a conversation with the wife about the candles :-). I'll make sure you donate to your page directly since your advice has helped me twice now. Thanks again!
I love your videos and I had to thank you. I watched a few of them until I got to this one which ended up being the problem with mine. I had no knowledge of furnaces before this and you made learning about them comprehensible and fairly entertaining as well. Not to mention the audio and video quality is great. I really appreciate it.
Tapping it made it work! Noticed vents were blowing cold air, burners weren’t on, and flashing 4 lights. This video saved us a goods night rest, THANK YOU!
Great to hear that! You're welcome, stay warm!!
After watching several furnace videos, This is the one that worked. Thank you!
in April of 2020, our furnace started blowing only cool air through the house. A little Googling and I landed at this video.
It fixed it and the process only took ten or 15 minutes! I just wanted to say thanks! Saved us the hassle of having someone out at the beginning of the pandemic and saved a bunch of money.
My heater was out for about 3 weeks and when I went online and watched this video for just 5 minutes, I was able to followed the first few steps and now my heater and up and running again.
Thank you for sharing knowledge!
Thanks Bro, you saved the day! After first snow in Minnesota yesterday, furnace stopped heating and I had called for service but they did not show up because it's a weekend and they had a lot of calls. So we have been cold all day and I decided to search on youtube and came across this video around an hour ago. It's 11 PM now and after a couple of wacks to the limit switch, the furnace is running again and heating the house!
That's what I like to hear! :) Glad I was able to help a fellow Minnesotan! It was snowing all day today too. Thank you for leaving a comment, stay warm!
Just fixed my furnace, because of you. Thanks a million! You are the greatest!
Your video saved the day! I appreciate the way you took time to explain how you take your voltage readings and you were very thorough in your explanations. Thank you my friend!
THANK YOU! You saved me paying hundreds of dollars to incompetent HVAC companies. They diagnosed my Trans furnace problem as the air pressure switch, and were going to charge $380 for the part and another $100 to go get it on a Saturday. Was the wrong diagnosis, would have been the wrong part, and many hours wasted. Thank you! I've subscribed. :)
You are a genius!!! I knocked on the limit switch a couple times and the inducer motor started up right away (Goodman and the limit switch was round, just like you described it). I had furniture in front of the intake vent, which was probably the culprit...just to let your viewers know. Thanks again!!!!
I realize you put this up something like 3 years ago but you just saved me. I don’t have the same type of switch like you so mine was easier to reset but thanks to you I knew what to look for. Then I was able to look up how to reset mine. My furnace actually has 2 of these. Anyway, thank you so much.
this video solved my issue! Noticed the furnace blowing cold air for hours and knew something was wrong. I changed the air filter, which was dirty from the past three months, I also forgot... but I couldnt find anything that would fix the problem until I found this video. Thank you so much!
Man that was the best way someone have ever explain something ... thanks a lot God bless u bro 🙏🏿☝🏿
I love UA-cam. And people like you that make easy to understand, concise videos. I watched another video or two that were okay but didn’t resolve the issue-yours did. Thanks for saving me the service call and a cold night as temps are supposed to drop the next couple nights here in MN. Signed, A Grateful Dad
Woke up on Christmas Day to a freezing house. I was so thankful for your video. You saved Christmas!!!
last year a professional showed me how to fix this switch. tonight we got home to a cold house with chores ahead, and I couldnt remember the protocol, thanks for your suggestions, because my memory literally created a switch array that doesnt seem to exist and I wouldnt have figured this out tonight without your walk through and my wifes calm lead.
warm house, still time to get caught up tonight, no lost workshift tomorrow and hopefully a proffesional isnt scheduled for tomorrow God willing. Guess I need to keep on those filters more often.
you ROCK sir!
Christmas day morning and your video helped bring us heat! We overheated and shut off... Overnight, temps hit -15°f/-26°c, we had a ton of drifting snow, and our outside vents had snowed and iced over. Knocked off the ice, reset the switch, and we are celebrating a better Christmas thanks to you!
Thank you so much for this video. It was very informative and clear to understand. You helped me diagnose and fix my furnace issue within minutes and saved me hundreds. Very well done!!
Exactly what happened to mine. This saved me so much time its insane. Fixed in 5 mins on my first search on UA-cam. Thanks for putting this together.
Awesome! No one else has this. I had the same problem. No heat. Clogged filter. Four red lights. Other videos really didn’t help at all. Your’s nailed it. Thank you!
Thank you so much! I removed the limit switch and gave it a few firm taps with the end of my screwdriver. All good! Thanks again for taking the time to make this video
Jack, thank you once more. It works. It is below 10 degrees here and I have no protection plan right now. I was freaking out about my family being cold. Thank you for giving a very clear instructions. God Bless.
As always, another awesome video from your channel. You helped me fix my furnace this morning in 5 minutes. Turning the furnace off, let it sit for a few seconds, and turning it off cleared the error code and just like that, I now have heat again. Appreciate your advice!!!
I had the same exact issue. Followed your video step by step and it worked! You saved me hundreds. Thank you!!!
You are a Star ! Watching you is like watching this old house or one of those public broadcasting stations andyou communicate and show what you're doing so well anyone could follow it most likely and you're not boring
What a great tutorial! There I was at 12am trying to trouble shoot my furnace and this video saved me from a cold morning. Easy to follow and great info. Thanks!
😅 12:08
Thank you for taking the time to make this video. Your banging on the switch did the trick for me! Same issue... Neglected filter.
Thank you sir!! Fan was constantly running throughout the night, was up waiting for it to shut off. House temp dropped to 62. Outside was 23. Found this video. Filter was embarrassingly dirty. Followed your steps of banging on switch, turned power back on and eagerly waited for start-up. Like magic I now have heat. Thank you so much.
Thank you! Haven’t had heat for a few weeks and this is all it was. I though I was going to have to fork out a bunch of money to get it fixed.
Happy to hear you were able to get it fixed! :) Stay warm!
Thank you so much! This is exactly what was wrong with our furnace! Such an easy fix. We're very happy we didn't have to call a repairman.
Glad to hear that! :) Thank you for leaving a comment, stay warm!
Thank you was able to install a 90 plus furnace in my home in the middle of last winter because of instructional videos such as yours. God Bless you.
Hello man. With your videos and recommendation, I found myself a replacement blower motor. So far, it runs smoothly, better than my previous one. Really appreciated!
It's 2am. It's 11 degrees outside and my furnace died. You saved my pipes from freezing. I tried everything and this fixed it. You are an hvac Robin hood.
Thanks for the info. This just happened to me this morning. My filter did not look dirty at all and was not my usual time to change it. I changed the filter anyway and so far everything has been working.
Thank you! Great video! Woke up this morning and the thermostat was at 57. Watched this video while my coffee was brewing and was able to fix it.
thank you so much for your videos. I sure wish I had found them last year. i'm a 60 yr old grandma who honestly doesn't know anything about mechanical things. i'm actually afraid to touch anything that uses electricity, gas, propane, etc. i'm afraid it will blow up. last year I practically rebuilt the front of my nordyne 90% propane furnace in the middle of winter. my electric bill doubled while I replaced almost everything trying to get the furnace to work. I kept getting different combinations of red blinks after I would replace a piece. I finally got it working and it was ok until a couple of weeks ago when I noticed that it was pouring cool air out of my floor vents again. this time the furnace would fire up and then the flames would go out after several minutes. sometimes the flames would stop burning where they were supposed to burn and an orange flame would light up inside one or two of the burner tubes. no actual "blow back", but the furnace would shut off after a few minutes and just cool air would come out of my vents. it would try to recycle but the same thing would happen. I found your videos and noted a lot less that I could replace this time around. I had a yellow blinking light which on my furnace means a low flame fault. I bought a new flame sensor because I was able to rub some gunk off of it but about 2/3's of it was blackened and would not clean off. I put the new flame sensor in, turned on my furnace and it seemed to stay on a little longer than the first time but still faulted out to the blinking yellow light and the cool air. I checked your videos again and started taking the burner box apart to try to clean the burners. got to a point where my available tools wouldn't allow me to continue--can't reach 2 of the screws on the right side of it. i'm trying to loosen things to a point where I can reach in and clean the burners on the right side without removing them. I cleaned the orifices in that bar from the gas bar in front of the burners. the burner by the flame sensor was blackened and I can't seem to get that clean either. I'm going to try to clean the condensate tubes too. I think this is all I have left to try unless you have any other ideas. it's been pretty cold here in the upper peninsula of Michigan as i'm sure you know--below zero wind chills at night and we've gotten so much snow that my garage just collapsed early this morning. so as you might have guessed....there's no new furnace for me any time soon. thanks again for your videos. you do a great job of teaching at the right level and showing us everything that we need to see--so many others just tell us what they've done but don't show the video. The only other comment I have is.....you don't happen to have a single father who knows as much as you do about all of this, do you?
Thanks so much. Eight degrees and no heat. We had been cutting a lot of tile in the garage, probably clogged the filter. A few raps on the switch got her up and running. You are awesome, we are grateful.
Happy to hear that! :) Glad you were able to get it fixed and the video helped. Stay warm!
Great video! I was able to troubleshoot my son’s furnace when he experienced no heat in his home. With a newborn in the house this vid came in the nick of time! Thanks so much!!
Thank you it worked I just changed the filter and smacked the switch a few times as told. It worked. Today is Christmas it saved me a service call and saved my family from a cold night as well. Thank you.
Thank you. Followed the instructions, and worked. Furnace back on. I tapped the furnace housing and the switch didn't reset. I removed it and tapped it and it reset. I would have diagnosed it and bought a new switch. Saved not only money, but the time to get the switch. Don't know why someone would give it a thumbs down. Two thumbs up!
My furnace if back up and running thanks to your help 🙂 🙏 thank you very much for sharing your experience! God bless you and your family.
I have (2) Bryant Plus 90i Furnaces. My problem was with one, it was blowing out cool air for a while, then cuts off and stays off for a long period of time then turns back on blowing cool air again. I called the HVAC guy and he charged me $435.00 just only to replace a pressure switch. Months later, a similar problem began with my other furnace. So I went on Ebay and purchased a Pressure switch costing $125.00 and installed it myself. Now I must say its working great! Thank You.
Thank you.
@@willarddickerson921 Nice work. I have learned so much about furnaces with the help of this guy and others on UA-cam. I have always been mechanically inclined but watching experienced folks helps out so much. I have replaced almost every part of my furnace the last 2 years.. in fact I have a spare ignitor now so if it breaks I can fix it right away. Next fall I may try replacing the entire thing as I know the heat exchanger is probably going to go bad sometime. It's 15 years old and that seems to be the life of appliances nowadays unfortunately.
You are the man!!! Ours has been blowing cold air and driving us nuts. Same exact problem as you and I had no idea that’s all it was. You just saved me a ton of hassle! Thanks so much! Subbed.
Thank you SO MUCH for making this video! It turns out my heater was having the same problem with overheating from lack of regular air filter changes & I was able to fix it just by following your video! You saved me so much money! Thank you thank you! I just subscribed to your channel!
Jay thank you so much for this video! This exact same thing happened to my furnace and I was able to fix it myself, which was super helpful as we are about to get historically low temps this week in Chicago, may get as low as -55!! Thank you again this video was great!!
Happy to hear that! Stay warm :)
Very nice, clear and concise presentation. Thank you for taking the mystery out of diagnosing this problem. Can't understand the "thumbs down" must be very insecure folks! Thank you again!
Thumbs down was a furnace repair man.
Thank you for this video Jay. Sure enough, it was the high limit switch that was stuck open and after a couple of love taps it is now working. Once again, thank you for this great and informative video.
Thank you Mr. J, this video helped me troubleshoot my heating issues at 2am. Having a celebratory beer in your honor. I couldn’t have done it without you!
Thanks for helping! That was a great video and you saved us on a VERY COLD night!! We are now your #1 fans!!
Wow we must protect this
Man at all Costs, I owe u my career🙌🏽
2 am, heater blowing cold air, thermostat reading 68°, thank God i found your video. Now the heater works like clock work, thank you man and God bless!!!
It worked just as you suggested. I can't believe I did it all by myself. I'm not a handy girl, but I was having problem with my furnace blowing cold air. I saw your video, followed your instructions and repaired it myself. It took me less than 2 minutes. I have a friend who is on his way over to fix it for me, he won't believe I did it either. Thank you so much. I was tired of being cold and waiting for someone to come by to look at it. Thank you thank you!!!!!
You're very welcome! :) Glad to hear you were able to get the furnace fixed yourself! Thank you for leaving a comment, stay warm!!
i love this guy. he's so detailed but straight to the point.
No he's not... the story about his wife blah, blah, was unnecessary filler.
You just saved my household a bunch of money, thank you!
Thanks for your great insight! Woke up at 6 am to a 50 degree house. Your knocking the sensor trick worked! The hardest part was getting the cover off lol. Thanks again
Man thank you so so much you literally helped me save my family from having to sleep in a cold night I will for sure recommend your videos to people
Once again, UA-cam saves me time and money.
Wow! You have a UA-cam career my friend. That was amazing fast, funny and saved me a lot of money! You deserve a lot more than just this comment!
This video along with a few others from YOUR channel saved my icy behind tonight! You are so thorough and made this easy to understand. Thank you thank you thank you!
Thank you SOOO much!! Single mom with 2 kids and thanks to you we now have heat!! You explained everything so well and easy to understand!! So grateful!!
I only can say thank you so much
God bless you and people like you
I have no idea what to do, watching couple video , tell me what to do , and when I start watching your , I said naaaaa can’t be that simple
You save me
Thank you
You are a genius and a Godsend! This was my problem and all I had to do is tap the end piece of metal and it fired right up. Saved me a hundred dollar service call for a little blood, sweat and wine lol
This was it! Hit it with a screwdriver and it worked. Life saver. It was cold! Thank you!
THANK YOU SO MUCH for this video! I'm sick and waiting on a COVID test, so couldn't call for any professional help. A fresh filter and a couple light wacks to the limit switch did the job. It was the limit switch that your video helped me with. It needed that little extra push to reset. Thank you again 🙏🏻👍🏻
Very nicely done. Good humor, good content. Most appreciated!
You’re a legend!! I was determined to fix this today and this trick worked for me. Thank you!! I’m so hyped right now!It was mad cold in my crib.
Great!! That's what I like to hear :) Stay warm!
This solved my exact issue and now I’m warm and probably saved a few hundred! Thank you so much!
Here I am on Boxing Day, thankful that guys like you post videos on YT. Nice walkthrough. Our furnace is now chugging away (and probably will be for the next few hours, as we were down to 15C in here!). Thanks!!
Thsnk you!!! This worked for me it was my filter too then tapprd the switch and boom warm again. I really appreciated the video
You're welcome! :) Thank you for leaving a comment, stay warm!
Great video. Saved my day! I had the same issues, and following these steps resolved it.
My goodness. Thank you so much for the tip. Banging didn't work initially so I took it out and tap it few times and put it back. Viola! Works! Thank you so much! Wow!
Thank you: I thought it was the Nest thermostat given the error code but when that did not check out, I found your video. Saved my day and my pocket book. Now I am looking for your video on the tips you mention for maintaining your furnace!
Thanks for the info! Soooo helpful. Great breakdown btw, this is exactly the type if step by step tutorial I need. I'm with your wife on putting on extra socks and wating for my husband to fix it lol, but your tutorial has empowered me to feel confident in troubleshooting it for myself. Thx again
Happy to hear the video was helpful! :) Stay warm!
Thanks you're the best wind chills in Chicago is 24 below -5 degrees and this work like a charm
Excellent video for all of us who don't want to pay $ 150,000 to get a limit switch fixed lol. You also instruct in a great and simple way. Thanks. Have a great day
So I’m in New england today in middle of winter storm kenan. Of course my heat decided to go out and nobody would come for an emergency because our roads are closed. I tried this and it worked. Absolutely thrilled!! Thank youuu!!
Thanks man! This is exactly what was wrong with my furnace. It worked great! I owe you a beer
You the man! You just saved me some serious cash. Whacked the switch and boom. Thank you!
Happy to hear it! Stay warm :)
Bless you man, your video helped me fix my furnace that ran but wasn't blowing hot air. All the local HVAC places are booked 3 weeks out and the temps are near freezing here in CT but now after 4 days, I got it working. I sent you a donation in Paypal 💜
I’m just want to said thank you so much 4 your help and information. I’m just got my hvac license and watching your videos is really helpful.
Thank you, bro! I sincerely and genuinely appreciate you and this video, especially on a cold day like this. I literally just banged on the open limit switch a few times, and BOOM!, it was back on. Thanks again, and may Allah bless you and your loved ones!
Thank you! You saved us from no heat during a February ice storm. We did exactly what you explained and the heat is blowing fine. I really appreciate your expertise and generosity to share it.
Thank you, it worked for me too. My wife woke me up at 4am telling me that the furnace isn’t working. Did a quick UA-cam search and found your video. I hit the switch couple times with a screw driver and started working. We changed the filter recently and apparently we put it in the wrong way.
Thanks again
This guy knows what he is doing. I fixed my furnace on 10m. Thank you sir.
Keep sharing more videos