Thank you for watching the video and leaving your feedback. Every comment you make helps the channel grow and motivates me to work more effectively. May God always bless you
@@Tips365day дак у тебя работа совсем не эффективна, а ты замахиваешься на "более". Для заточки пилы используется приспособление, зажимаемое в тисках, в эту приспособу уже зажимаешь само полотно, оно приспособой наклонено немного под углом, чтобы удобнее было затачивать. Приспособы если нет, делаешь ее за пару минут из куска жести. Берешь треугольный напильник и проходишь по всем четным зубьям, потом вытаскиваешь полотно, переворачиваешь и проходишь по оставшимся нечетным. В результате ножовка как новая, режет практически сама!
Para este tipo de serrote, chamado serrote de dente de tubarão, ou serrote japonês, a lima não é essa aí, é uma própria, estes dentes têm três faces, não se faz tantos movimentos assim eles contatos para que não fiquem desiguais, desbalanciados, veja não falo prá criticar, só acho que deveria procurar se informar melhor.
Hello from the east of England. At 2:00 your caption says 'Lemon' but that fruit is definitely a lime, not a lemon. I think the word is the same in Portuguese.
Just a few notes: The first process probably just dissolves the rust. Lemons contain citric acid which dissolves rust. The charcoal is probably just working as a carrier allowing a paste to be made. I guess that clay or sawdust would work just as well. I'm not sure whether this would work with a modern saw. These have tempered edges which are nearly as hard as the tool steel in the file and the teeth might snap when you bend them. I would suggest heating the saw before sharpening and adjusting the teeth. Andrew, Norway
Taking the temper out by heating will soften the edges also. There is a specific tool to bend ("set") the teeth angle a saw set. It does each to the correct angle. Also the teeth need filing to the same correct angle and height. They shouldn't need re-tempering as shown, it would make future sharpening risky. Modern hard cheap saws are probably throw away types, we love out rubbish. They'd be all plastic if possible.
Потому что заточка не тем инструментом не под теми углами, разводка не прогнозируемая и неуправляемая, как левая нога захочет. Зачем перед заточкой снимать ржавчину таким сложным методом? Да и вообще зачем ее снимать. Но если уж снимаешь ржавчину то что что помешало разобрать пилу и снять ржавчину со всего полотна? Что помешал взять правильный надфиль? Почему не затачивались острия зубьев? Тем более что на картинке видно, что изначально они были сточены, чтобы правильно резать древесину. И собственно, в чем простота метода? Только в том, что правильный метод не применен?
Great, a saw from the last century was restored using only simple methods from simple materials. I will practice right away with old items in my house. Thank you for sharing 👍
Thank you for watching the video and leaving your feedback. Every comment you make helps the channel grow and motivates me to work more effectively. May God always bless you
Thank you for watching the video. Wish you success and always happy in life. The video I have created subtitles in many different languages. If you do not understand, please choose subtitles (CC) with appropriate language to understand the video content clearly.
0:21 когда автор начал пилить "от себя" пилой с японской обратной заточкой зубьев мне просто нехорошо стало.... А когда в конце ролика он 10 сек мусолил рейку, которую моя пила Samurai режет за 3 реза на себя, все встало на свои места... Остаётся пожурить автора за небрежность и пожелать удачи, как говорится: " Пилите, пилите Шура, она золотая...", я уверен многие меня поняли...😆
Thank you for watching the video and leaving your feedback. Every comment you make helps the channel grow and motivates me to work more effectively. May God always bless you
Thank you so much for your support! We appreciate you subscribing and liking our content. Your support means a lot to us, and we’re glad to have you as part of our community!
@@Tips365day After removing the rust by wiping the ash from the country oven with water, sharpening the saw blade with a file and spraying WD on it, you can use it. Wouldn't tools such as a vise be unnecessary?
Вы выбрали неправильный напильник. Нужно работать ромбовидным напильником, он более подходит по размеру Вашей ножовки. Ржавчину убрать можно и более простыми способами. Закалку зубьев тоже можно проводить более грамотно.
Jos ei saha ollut vielä ihan pilalla, niin tuolla käsittelyllä se kyllä meni 😂 Tuollaisen sahan teroittamiseen on olemassa litteä sulkaviila jossa on neljä teroituspintaa .
Thank you for watching the video and leaving your feedback. If you are unclear, don't hesitate to write to me in the comments section of the video so I can assist you
Very time consuming. Cheaper to buy a new saw. I know a guy who can sharpen the saw blade using an electric motor equipped with a diamond disc. He charge $2.00 for labor. Takes 10 minutes.
Блин, мое высшее образование термиста кричит, что при нагреве сталь теряет твёрдость, а не приобретает. А сам способ заточки напильником классический, Америку не открыл автор.
Thank you for watching the video and leaving your feedback. Every comment you make helps the channel grow and motivates me to work more effectively. May God always bless you
Minusta näytti että toisen puolen hampaat olivat ihan loppu ja näinollen tuon kuntoinen terä joutaa romukoppaan. Myös viila oli väärä noin tiheähampaisen terän teroitukseen, vaan pitää olla litteä sulkaviila. Ajatus vanhan sahan kunnostukseen oli toisaalta ihan hyvä.
Thank you for your feedback! 😊 We appreciate your honesty and comparison. Our aim is to share creative and engaging content that inspires. If you have any suggestions or questions, feel free to share. Thanks for watching!
Thank you for watching the video and leaving your feedback. Every comment you make helps the channel grow and motivates me to work more effectively. May God always bless you
Thank you for watching the video. Wish you success and always happy in life. The video I have created subtitles in many different languages. If you do not understand, please choose subtitles (CC) with appropriate language to understand the video content clearly.
Thank you for your comment! We aim to present methods suitable for various situations. If you know an easier way to sharpen saw blades, please share it so the community can learn together!
Thank you for watching the video and leaving your feedback. Every comment you make helps the channel grow and motivates me to work more effectively. May God always bless you
Thank you for watching the video and leaving your feedback. Every comment you make helps the channel grow and motivates me to work more effectively. May God always bless you
Thank you for watching the video. Wish you success and always happy in life. The video I have created subtitles in many different languages. If you do not understand, please choose subtitles (CC) with appropriate language to understand the video content clearly.
Thank you for watching the video. Wish you success and always happy in life. The video I have created subtitles in many different languages. If you do not understand, please choose subtitles (CC) with appropriate language to understand the video content clearly.
Yeah that still looks pretty blunt to me but hope you can improve your technique in time so hats off to you for trying and thanks for the video upload. Bless you my friend! 😁
Thank you for watching the video and leaving your feedback. Every comment you make helps the channel grow and motivates me to work more effectively. May God always bless you
Thank you for watching the video and leaving your feedback. Every comment you make helps the channel grow and motivates me to work more effectively. May God always bless you
Los serruchos de poda, como ese, no tienen trisque, así que es un error doblarle hacia afuera los dientes. Además, es un serrucho de poda, por tanto, para madera verde. No es un serrucho de carpintero.
Thank you for watching the video and leaving your feedback. Every comment you make helps the channel grow and motivates me to work more effectively. May God always bless you
Thank you for watching the video and leaving your feedback. Every comment you make helps the channel grow and motivates me to work more effectively. May God always bless you
Well I normally just throw them away and buy a new one, but I can make the time to try this at least once. If I get a good result I may even stop throwing them away and actually fix them. Thank you
Thank you for watching the video and leaving your feedback. Every comment you make helps the channel grow and motivates me to work more effectively. May God always bless you
いい情報、ありがとうございました。^^
たびたび立ち寄ります。🍀🍀
좋은영상 감사합니다
Thank you for watching the video and leaving your feedback. Every comment you make helps the channel grow and motivates me to work more effectively. May God always bless you
Для начинающих видео замечательное.
А те кто умеет точить пилы может и не смотреть.
Спасибо.
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
@@Tips365day дак у тебя работа совсем не эффективна, а ты замахиваешься на "более". Для заточки пилы используется приспособление, зажимаемое в тисках, в эту приспособу уже зажимаешь само полотно, оно приспособой наклонено немного под углом, чтобы удобнее было затачивать. Приспособы если нет, делаешь ее за пару минут из куска жести. Берешь треугольный напильник и проходишь по всем четным зубьям, потом вытаскиваешь полотно, переворачиваешь и проходишь по оставшимся нечетным. В результате ножовка как новая, режет практически сама!
Хочешь "угробить ножовку - повторяй за ним.
Para este tipo de serrote, chamado serrote de dente de tubarão, ou serrote japonês, a lima não é essa aí, é uma própria, estes dentes têm três faces, não se faz tantos movimentos assim eles contatos para que não fiquem desiguais, desbalanciados, veja não falo prá criticar, só acho que deveria procurar se informar melhor.
Felicitări!🙋♂️👍👏👉🤝👉💪
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
"This method is a game changer! I've been struggling to sharpen my saw blades properly, but your technique made it so easy. Thank you for sharing!"
❤❤❤
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
@@Tips365day yes
Hello from the east of England. At 2:00 your caption says 'Lemon' but that fruit is definitely a lime, not a lemon. I think the word is the same in Portuguese.
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
The English know a lime from a lemon! I add lime to steel wool to remove rust. It's just for the refreshing aroma. Doesn't affect rust.
Just a few notes:
The first process probably just dissolves the rust. Lemons contain citric acid which dissolves rust. The charcoal is probably just working as a carrier allowing a paste to be made. I guess that clay or sawdust would work just as well.
I'm not sure whether this would work with a modern saw. These have tempered edges which are nearly as hard as the tool steel in the file and the teeth might snap when you bend them. I would suggest heating the saw before sharpening and adjusting the teeth.
Andrew, Norway
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Taking the temper out by heating will soften the edges also. There is a specific tool to bend ("set") the teeth angle a saw set. It does each to the correct angle. Also the teeth need filing to the same correct angle and height. They shouldn't need re-tempering as shown, it would make future sharpening risky. Modern hard cheap saws are probably throw away types, we love out rubbish. They'd be all plastic if possible.
@@johnmead8437 ✅✅✅
Good work Thanks. 🍀🤵♂️
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
I'm from Australia. I'll give it a go.
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Мне одному кажется что она как не пилила, так и не пилит толком после такой заточки?
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Потому что заточка не тем инструментом не под теми углами, разводка не прогнозируемая и неуправляемая, как левая нога захочет. Зачем перед заточкой снимать ржавчину таким сложным методом? Да и вообще зачем ее снимать. Но если уж снимаешь ржавчину то что что помешало разобрать пилу и снять ржавчину со всего полотна? Что помешал взять правильный надфиль? Почему не затачивались острия зубьев? Тем более что на картинке видно, что изначально они были сточены, чтобы правильно резать древесину. И собственно, в чем простота метода? Только в том, что правильный метод не применен?
@@Tips365dayтак ты кроме продвижения своего канала, думай о том, что людей ввёл в заблуждение! Сам вначале поучись.
очередной рукожопый советчик............ она реально вообще перестала пилить...
Так главное, что куча просмотров! То люди должны знать, что не все с таких видео годится для практики!
Этот надофиль не для этой пилы. Развод переборщил. Зубья не закалил , а отпустил.
очередной рукожопый советчик............
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
😂Mulțumesc mult din România
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Great, a saw from the last century was restored using only simple methods from simple materials. I will practice right away with old items in my house. Thank you for sharing 👍
Very good 👍
Learn how to do it correctly first, this has room for improvement. Lots of room if ruined tools aren't wanted.
@@johnmead8437 Charcoal mixed with pudding will get a child clean after rinsing.
From Brazil!
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
I didn't know the name of material that you mixed.
Would you tell me please.
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
From Australia
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Good video making skills. Not so much saw sharpening.
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
❤❤❤
i am from greece
Thanks for letting me know! If you need any help with Greek translations or content, feel free to ask. 😊
Only at more than half video I realized it was a joke🤣🤣🤣🤣🤣🤣
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Teşekkürler.emeğinize sağlık.
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Hello from New Zealand, I am looking for how to sharpen hand saws properly.
Thank you for watching the video and leaving your feedback. Every comment you make helps the channel grow and motivates me to work more effectively. May God always bless you
Formidable. Merci. 👍
De la Guadeloupe.
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Terimakasih , akan saya praktekkan.
Thank you for watching the video. Wish you success and always happy in life.
The video I have created subtitles in many different languages. If you do not understand, please choose subtitles (CC) with appropriate language to understand the video content clearly.
please stop! don't ruin things - like in this video! better find out first - how to DO IT CORRECTLY!!! GOOD LUCK!!!
0:21 когда автор начал пилить "от себя" пилой с японской обратной заточкой зубьев мне просто нехорошо стало.... А когда в конце ролика он 10 сек мусолил рейку, которую моя пила Samurai режет за 3 реза на себя, все встало на свои места... Остаётся пожурить автора за небрежность и пожелать удачи, как говорится: " Пилите, пилите Шура, она золотая...", я уверен многие меня поняли...😆
Thank you for watching the video and leaving your feedback. Every comment you make helps the channel grow and motivates me to work more effectively. May God always bless you
What is the filing angle please ? ----can I use a thin angle grinder --dont have a decent 3 corner file in the aAfrican bush !
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Your videos consistently provoke fresh ideas within me. Gratitude for sharing!😉
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Hello ❤❤❤
What you can use ruined saws for?
구독 좋아요. 이웃까지 갑니다.
Thank you so much for your support! We appreciate you subscribing and liking our content. Your support means a lot to us, and we’re glad to have you as part of our community!
Can I use a very thin Dremel or angle grinder disc --to sharpen blade ? & what angle ?
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Je suis d'Algérie
Bonjour de l'Algérie ! Merci de suivre la chaîne Tips 365. Si vous avez des questions ou des idées, n'hésitez pas à les partager !
헌 톱 하나 손보는데 드는 도구들이 만만찮네요.그 도구들 준비하는 돈으로 새 톱 마련하는게 경제적일듯.
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
😢😢😢😢
@@Tips365day After removing the rust by wiping the ash from the country oven with water, sharpening the saw blade with a file and spraying WD on it, you can use it. Wouldn't tools such as a vise be unnecessary?
Вы выбрали неправильный напильник. Нужно работать ромбовидным напильником, он более подходит по размеру Вашей ножовки. Ржавчину убрать можно и более простыми способами. Закалку зубьев тоже можно проводить более грамотно.
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Jos ei saha ollut vielä ihan pilalla, niin tuolla käsittelyllä se kyllä meni 😂 Tuollaisen sahan teroittamiseen on olemassa litteä sulkaviila jossa on neljä teroituspintaa .
Nice 👍 thanks for sharing
Thank you for watching the video and leaving your feedback. If you are unclear, don't hesitate to write to me in the comments section of the video so I can assist you
heaven! I know how to sharpen saws. I won´t let this guy touch my saws, no way.
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
@@Tips365day What would motivate to reply to comments non-generically
How to be a youtube star though, a trail of rubbish ruined tools
Thanks for your video...I am from Valencia Spain
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
That's awesome, very good and useful content
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Ебатьня с дремотой я за это время 3 штуки от.ху. Скосил до бритвы
Very time consuming. Cheaper to buy a new saw. I know a guy who can sharpen the saw blade using an electric motor equipped with a diamond disc. He charge $2.00 for labor. Takes 10 minutes.
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Lo pondré en práctica a ver que resulta el afilado
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Пародия на заточку,...
очередной рукожопый советчик............
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Er --what is the angle you are filing the saw teeth ?
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
He did a good job I thought. Does the blade soak in absorb WD40 after heat treated?
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
さつせくしてみますありがとう
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Размазал кашу по тарелке и вернулся к тому, что нужно взять напильник и заточить зубья
😂🤣😂🤣
очередной рукожопый советчик............
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Очередной "гениальный" ролик
Ролик тупой, как и его создатель. Нихрена не понимает, но продвигает говноканал.
Блин, мое высшее образование термиста кричит, что при нагреве сталь теряет твёрдость, а не приобретает. А сам способ заточки напильником классический, Америку не открыл автор.
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
хитрөц. Он, просто, собрал просмотры. Жаль потраченного времени
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Це точно((((((
Перед заточкою зуби розводять
鋸の歯にガスバーナーで加熱すると、歯がなまってしまいますが？
焼き入れ後ならわかりますが、私は金属の加工や焼き入れを会社でやったことが有ります。
Thank you for watching the video and leaving your feedback. Every comment you make helps the channel grow and motivates me to work more effectively. May God always bless you
Não faça afiação num serrote japonês com com uma lima triângulo como essa, tem que ser a losango, e é um pouco cara.
Minusta näytti että toisen puolen hampaat olivat ihan loppu ja näinollen tuon kuntoinen terä joutaa romukoppaan. Myös viila oli väärä noin tiheähampaisen terän teroitukseen, vaan pitää olla litteä sulkaviila. Ajatus vanhan sahan kunnostukseen oli toisaalta ihan hyvä.
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Ставьте лайк у кого тоже потекли слюни когда он выжимал лимон😊
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
@@Tips365day гэта не лімон а лайм невук
ใช้ถ่านกับมะนาวหรือเปล่าครับ
@@ВасільШкуратаў Тебе виднее, ты же в шароварах!🤣🤣🤣
@@СергейГрозов-р7г хто ведае у чым я галоўнае што ты хворы а вось чаму не ў лякарні то біш не ў дурцы
To harden the steel is a nice idea.
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
You never pull the file back through the teeth you have to push faward all the time when sharpening 😊
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Great ,Thanks .Itay by Tuscany :).
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Отлично спасибо за информацию
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Terimakasih akan sy coba
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
your filmmaking is much better than saw sharpening. Razor sharpness?????
Thank you for your feedback! 😊 We appreciate your honesty and comparison. Our aim is to share creative and engaging content that inspires. If you have any suggestions or questions, feel free to share. Thanks for watching!
Pat a Mat......a je TO :o)
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Why did you heat the saw teeth with the torch? You ruined the heat treat and just annealed the steel making it softer
Thank you for watching the video and leaving your feedback. Every comment you make helps the channel grow and motivates me to work more effectively. May God always bless you
Soak it in cola for two hours to remove rust.
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Good idea
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
хорошо что я читаю комментарии прежде чем смотреть всякую лабуду тем более до конца
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Video không có tiếng không có thuyết minh
Thank you for watching the video. Wish you success and always happy in life.
The video I have created subtitles in many different languages. If you do not understand, please choose subtitles (CC) with appropriate language to understand the video content clearly.
That's the usual way, not an easy way to sharpen saw blades.
Thank you for your comment! We aim to present methods suitable for various situations. If you know an easier way to sharpen saw blades, please share it so the community can learn together!
Смысл правильный, тока ножовки в начале и в конце разные.
Thank you for watching the video and leaving your feedback. Every comment you make helps the channel grow and motivates me to work more effectively. May God always bless you
Thanks....buuuuut.......Im..juss..gonna...buy..a..new..saw....
Thank you for watching the video and leaving your feedback. Every comment you make helps the channel grow and motivates me to work more effectively. May God always bless you
meşe kömürümü,normal kömürmü
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
From Romania .
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
This young man is too talkative - his methods are outdated and messy, unlike anyone else's, but he's always trying to give instructions
Thank you for watching the video. Wish you success and always happy in life.
The video I have created subtitles in many different languages. If you do not understand, please choose subtitles (CC) with appropriate language to understand the video content clearly.
🎉🎉🎉🎉
Д@@Tips365day😂
@@user-ti8sn5oo6i 🤗🤗🤗
По русски
これはノコギリを破壊する動画。
しかも全然簡単ではない。
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
손톱은 녹슬면 줄로 갈아도 잘들지 않아요 초보자는 줄로가는것도 쉽지않고요
Thank you for watching the video. Wish you success and always happy in life.
The video I have created subtitles in many different languages. If you do not understand, please choose subtitles (CC) with appropriate language to understand the video content clearly.
전문가의 손길입니다
일반인 보라는게 아닙니다
의견 주셔서 감사합니다! 저희는 항상 아이디어를 간단하고 창의적으로 보여드리려고 노력하지만, 때로는 특정 기술이나 전문 도구가 필요할 수 있습니다. 모든 분께서 자신감과 안전을 느끼실 때만 작업하시길 권장합니다.
5:31 Oh man, great job. I like the way you do it
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
@@Tips365day 🩷🩷🩷👍
Ерунда и времени надо полдня, где же быстрота?😅
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
очередной рукожопый советчик............
Это все делается без всяких приспособлений с помощью того же напильника и ножа. С тем же эффектом и намного быстрее.
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Yeah that still looks pretty blunt to me but hope you can improve your technique in time so hats off to you for trying and thanks for the video upload. Bless you my friend! 😁
Thank you for watching the video and leaving your feedback. Every comment you make helps the channel grow and motivates me to work more effectively. May God always bless you
something new? I wasted my time to see the way people have been sharpening saws since they were invented!
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Καλησπερα απο ηγουμενιτσα.
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Это не заточка полотна ножовки , а издевательство над инструментом!!!
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
You were talking abt. 20minutes but the clock Was turning around for hours!!???
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
After rinsing off the carbon from the blade…the handle looked brand new😂
Да каждый школьник в 6 классе знает как затачивать пилу! Чем вы хотели удивить?
Thank you for watching the video and leaving your feedback. Every comment you make helps the channel grow and motivates me to work more effectively. May God always bless you
Acest tip de fierăstrău, nu se ascute cu pila triunghiulară!
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Сколько лишнего? Очистить просто очистителем ржавчины, а уж точить? Даже я пенсионер точу болгаркой за 5 мин. Отрезным диском, как и цепи пилы.
это очередной рукожопый советчик............
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
That is Lime.. not Lemon..
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Los serruchos de poda, como ese, no tienen trisque, así que es un error doblarle hacia afuera los dientes. Además, es un serrucho de poda, por tanto, para madera verde. No es un serrucho de carpintero.
y otra cosa más, la lima utilizada no es la suya, esa es demasiado ancha y se carga el dentado. Se debe usar una lima rómbica
Thank you for watching the video and leaving your feedback. Every comment you make helps the channel grow and motivates me to work more effectively. May God always bless you
Terveisiä Suomesta (Finland) napapiirin pohjoispuolelta. Olipa hyvä video. Kiitos.
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
되지.한마리
.
한국에서왔어요.
Thank you for watching the video and leaving your feedback. Every comment you make helps the channel grow and motivates me to work more effectively. May God always bless you
Полный отстой,причём безграмотность. 8:50
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
❤❤❤
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Нельзя сказать кратко,что и для чего делать?Зачем красть чужое время-жизнь и деньги,чтобы,чтобы грабить?
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
What a carry on?-I'd just buy a new saw!
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Развод большой не режет а рвет нагрузкана руки в два раза больше
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Полагаю, что надо начинать с создания полотну развода, а потом все остальное.
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Hello !
Peut on avoir l'explication en français, s'il vous plaît ?
Can we have the explication in French ,please.Thanks
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
目立てには、ダイヤモンドやすりがいいよ
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Maravilha
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Well I normally just throw them away and buy a new one, but I can make the time to try this at least once. If I get a good result I may even stop throwing them away and actually fix them. Thank you
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
작금 어느 시대인데 그렇게 녹을 제거합니까
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
日本には目立てヤスリがあります
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
50년 전 방법, 지금은 잘 갈린 새톱날만 철물점에서 저렴하게 구입해서 갈아 끼우기만 하면 된다. 언제 이런 긴 시간 소비하며 하겠는가? 철물점도 돈도 없다면 뭐 어쩔 수 없겠지만....
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
من از ایران
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
At the end, its just filing the teeth, making crude saw set that can break a tooth. Yes, why carbon and lime when wd40 is availablè.
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively
Or you could just buy a new saw and take care of it. You my friend have way too much time on your hands.
Thank you for watching the video and leaving your feedback. Every comment you make helps the channel grow and motivates me to work more effectively. May God always bless you
지극정성으로 갈아야 새롭게탄생
Thank you for watching the video and leaving your feedback. Each comment you make helps the channel grow and motivates me to work more effectively