As a locksmith in a large US city with 33 years of experience here's my opinion. THIS is NOT a "key" it is especially NOT a key that will "unlock ALL locks." It is basically a pick. It opened the CHEAP $10 lock because it's a 'cheap $10 lock." It will not open 99% of house locks or other locks that are made properly. This is clickbait.
ya but even the most basic kits will have ones that are far better quality than this. i mean for a couple bucks too. the cheapest, bottom of the barrel rake you can buy for under $5 would be 10000x the quality of the crap this guy made in the video.
The first pick I think is called a "rake" Works on more than one lock but not all, so lock picking tool kits usually have several. Takes a certain method and practice skill to use, and some locks cannot be raked open. The "L" shaped tool is used to put a slight torque on the lock cylinder while picking to assist in holding up the lifted pins so they don't fall back (they're under spring pressure ) and/or to just help completely turn the cylinder. Lock picking takes skill, finger sensitivity, and practice.
@@railgap what? you mean people didnt go out and make these crappy diy rake "lockpicks" and open every lock ever?!? NO?!!!!!? i cant believe it. im shocked.
Olá meu amigo suas ideias são excelentes vou copiar todas elas me salvou pois estava sem esperanças e você a trouxe de volta a mim eu sou do Brasil e agora eu sou um fã de seu trabalho maravilhoso ❤️❤️❤️ muito sucesso para você meu amigo 🎉🎉🎉
The first part is a normal lock picking rake and pressure lever. plus thie second part makes an emergency key for that lock only,,, not all locks. Use the rake or other lock picking tools to open the lock, the superglue key can easily break off making the lock totally useless. Openning a padlock like the one you are using only takes a piece of drinks can slid down where the shank enters the lock to open it, saves ages having to make a weak key.
I love the idea of using hot glue, foil tape, WD-40, graphite, baking soda, and super glue to make a key! Using a key that you already have.....wait what?
As is usual for videos like this, they are a bunch of nonsense, or do something simple the hard way. The first pick was just a poorly constructed rake, which was used improperly by the maker. Such a device will NOT open most pin tumbler locks - much less other lock varieties. A locksmith might take a swipe or two with a rake as a first attempt in case the pinning is poor. If that doesn't work within less than a minute, then he/she will pull out proper picks. Interestingly enough, the rake is useless against two of the most simple lock mechanisms, the warded lock and the lever lock. With the graphite/super glue nonsense: the molded key would be very fragile and would break in a stiff lock. He had, the key - just take it to a hardware store or locksmith and get a key cut for a couple of dollars. Or buy a blank from an online source for about a dollar and file the blank to match the original.
Ok, the consensus finds it useless, but imagine: If your key broke in half and the store is closed or you are unable to get there this method with simple basic materials...Keep up the good work!!!😂
There are keys that you cant make copies of. Post office PO BOX keys, Bank Security Boxes, Commercial buildings, etc. They all become a problem if i lose the key. Office building is inconvenient until you get maintenance to get you another one in a day or two, PO BOX it's a $65 dollar replacement fee, if not more, Security box is even worse it's days and over $300 as they have to drill out the lock.
Technically you don't actually need the key in your possession that entire time. You just need the key long enough to make the hot glue mold and then return it without anyone being the wiser. Then you can take your sweet time to replicate it using the method in the video. But a much faster and easier way to achieve the same goal is to simply cut a bar of soap in half and keep it ready with you. Now when you get a hold of the key, just press it really hard into the soap to get a mold (you can also use certain types of clay). This works much faster, especially since you don't need electricity, a hot glue gun or the WD-40....nor do you need to clean the WD-40 from the original key. And since soap/clay has a much higher melting point than hot glue, you can heat up some low-melting point metals like Field's Metal, Bismuth, Alum, Zinc, etc.. and pour it into the soap mold to get a much more durable key copy instead of the brittle superglue/baking soda/graphite mix.
A Dremel diamond disc is faster than a file. I'd finish up with another Dremel item; a small grinder cylinder, diamond dust if possible. The key copy ; You could do better though. Press in mirror box on both sides, but with Dynacast on the inside in 5mm sheets inside a 10mm gap , and bake it hard maybe or use as is. Now you coat that and fill with the mix you made there, so there's a perfect 2 sided copy. The dynacast wont stick to itself if coated with oil first. I'm a fan of Avocado oil. It's high temp stuff.
@@TheKhopesh Dynacast plastic. It's used by machining a part in dynacast then packing it in red sand, then displacing the red sand with molten metal. Foundries use it. It's been around for years. Also if making a key copy you can use a tougher material from the auto parts store use for bolt repairs etc... a gray putty that dries hard as glass.
This video is so creative! The way you explained everything step-by-step was easy to follow. I can't wait to try this myself. Keep up the amazing work!
Love it man!!! Car dealerships want you to pay with blood for a replacement key even without the chip. Great solution.A lot of cars still have one door , usually drivers side door, that has a manual lock this method could save tons of stress and money. Wish me luck. Thank you for your efforts.
I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates
Yes, a rather poorly made rake. Rakes and bump keys are used by locksmiths only for insecure locks. If those don't work in a minute or two, they pull out a proper lock pick set. @@MrPocketfullOfSteel
Well I was a sane locksmith. One can open a cheap Viet-Tiep padlock with about anything. To say this homemade rake will open ALL locks is the actual crazy part and beyond wrong. That is a lot of trouble to copy a key. Full disclosure I did make key imprints as a child for fun because I was a little boy. Explain the line and logic on why this video would make me crazy please. Anyone?
My dad was a locksmith and a psychopath. When I lost my house key. He made me cut a duplicate with a file... I thought they were going to make a "Bump" key.
Nice video. Suggestion: Instead of a jigsaw blade, you can use a blade from a street/parking lot sweeper. It has the same tensile strength as a jigsaw blade and you don't have to cut it down.
I was doing that exact same thing in the 60's and 70's, then I found feeler gauges worked good too. Those sweeper blades were everywhere back then, now here they use some sort of bristle.
"Absolutely mind-blowing video! Your skills and expertise as locksmiths are truly impressive. Making a key that unlocks all locks is nothing short of genius. The precision and attention to detail in your work are commendable. Thanks for sharing this fascinating process with us. Keep up the amazing work! 🔐🔑 #CreationHolic #Locksmith #Key #Lock"
It's not even a little bit "absolutely mind-blowing" if you know that what he did was make a crude wave rake. You can buy them for about $2. It's also a lie, it absolutely can't open all locks.
For $5-10 I can have walmart key-kiosk machine make a copy. Might even be able to do it for 3 if I buy an uncut key, and bring it to a hardware store that still has a key-copy machine for free
Sayın arkadaşım. Video paylaşımını dikkatle izledim.Çalışma dikkati ve titizliğiniz güzel işçilik çıkardığınızı bize gösteriyor.Biz amatör izleyenler soru sormadan geçemiyoruz. Şöyle ki,Dekupajın metal lamasının işlem sonlanmış haliyle genişliği ve et kalınlığı hakkında bilgi bekliyoruz.Çünkü kendi uygulamamızda sıkıntı görmek istemiyoruz.
0:21 interesting method to mark a line before cutting! (I know the video is otherwise a clickbait. There is normal knowledge regarding locks that I collect in playlists and does not have so many views.)
Good job dude 👍 Although in my opinion, a better and faster way to open padlocks is to pour water into the lock and put the padlock in the freezer. The ice formed will increase in volume bursting the lock from the inside. No thanks 😉
That's cute. Anyone who might want to make one of these gadgets might want to consider: in California this is a violation of Penal Code section 466, possession of burglary tools. Yes, it is "only" a 6 month misdemeanor. Every state has similar laws. If you are caught with one of these and you are not a licensed locksmith you can expect your local police department and sheriff's office burglary divisions to forever suspect you of every burglary in their jurisdiction. No problem, you say. They have to prove it. You're right. They do have to prove it. In the mean time you'll be constantly "talked to" by those people and in the course be spending a boatload of money on attorneys. But don't take my word for it. If you're in for a penny why not go in for a pound. You only have your liberty to lose. 🤠
Pero te recuerdo también hay policías en las redes y yo podría ser uno de ellos cuidado con lo que escriven y publican siempre abra un seguimiento en TODO.
Esa llave es metálica porque si fuese de grafito y bicarbonato se quiebra al hacerle presión no soy cerrajero pero mi trabajo es instalación de todo tipo de cerraduras saludos desde Barranquilla Colombia
I like the first picklock, the bad news is the padlock was maden in china. These padlocks are easy to open, they are good to practice. The clear padlock is opened easier than first one because it is to learn how to picklock any lock.
Buen video para estar entretenido y pasar el rato. Pero en la vida real la gente inteligente hace una llave de repuesto antes que se dañe la original. Saludos
I guess the title of the video was referring to the lock pick or bump key you made but there's still a lot of Variables that come in to play when making a bump key... For sure the one that you made will not open all locks ..
Just a little trick to make the key easier : You can use baking soda instead of graphite, mixed with Super Glue ( cyanoacrylate glue ), it works even better to create a strong key ( or anything else, like a undetectable but deadly knife or pick to stab a guy, very useful in jail for example ). Glass powder works also very well, but would probably be too hard to cut the key with a simple cutter.
I thought you said the key will unlock all locks. All it is is a duplicate key made with a lot of labour and risk to safety when it is easier to go to the key cutters and get a new key cut.
As a locksmith in a large US city with 33 years of experience here's my opinion. THIS is NOT a "key" it is especially NOT a key that will "unlock ALL locks." It is basically a pick. It opened the CHEAP $10 lock because it's a 'cheap $10 lock." It will not open 99% of house locks or other locks that are made properly. This is clickbait.
Tens toda a razão, porque também é minha profissão.
1st one was a rake or jiggle key. 2nd is if ur broke n can't go get a copy key real quick lol
Thought he was making a bump key on # 1. It was until after 1st half of making it
It's a 'rake'. A specific type of 'pick'.
yes
It's called a city rake.
It's a pick that is available in the most basic kit
Thank you for watching
@@creationholic1011st one you actually made a bump key but turned it into a rake or jiggle key.
ya but even the most basic kits will have ones that are far better quality than this. i mean for a couple bucks too. the cheapest, bottom of the barrel rake you can buy for under $5 would be 10000x the quality of the crap this guy made in the video.
The key will not open EVERY lock. It will open the one lock it's made for. 😕
sv_cheats_1
sv_cheats_feds_free
sv-cheats_unlock_everything
Some great Mcguiver stuff here though!
The first pick I think is called a "rake"
Works on more than one lock but not all, so lock picking tool kits usually have several.
Takes a certain method and practice skill to use, and some locks cannot be raked open.
The "L" shaped tool is used to put a slight torque on the lock cylinder while picking to assist in holding up the lifted pins so they don't fall back (they're under spring pressure ) and/or to just help completely turn the cylinder.
Lock picking takes skill, finger sensitivity, and practice.
thank you. i went to the comments just to look for this
Je viens du Canada français et quand la marde vas tomber , ça va mètre très pratique pour survivre. 🙂🇨🇦💯💯👍
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Magnífico tutorial para iniciarse en el sector del robo!
The video's purpose is to help people have more options when they lose their keys
Do you not have access to a Dremel or similar tool? That's a mighty fine cut for an angle grinder.
Thank you! Cheers!
SAY AFTER ME: LIFE HACK VIDEOS ARE NOT REAL
LIFE HACK VIDEOS ARE NOT REAL@@railgap
@@railgap what? you mean people didnt go out and make these crappy diy rake "lockpicks" and open every lock ever?!? NO?!!!!!? i cant believe it. im shocked.
Olá meu amigo suas ideias são excelentes vou copiar todas elas me salvou pois estava sem esperanças e você a trouxe de volta a mim eu sou do Brasil e agora eu sou um fã de seu trabalho maravilhoso ❤️❤️❤️ muito sucesso para você meu amigo 🎉🎉🎉
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
真的瘋了，花那麼久的時間做出一把鑰匙
Thank you for watching
Or you could go to a hardware store and make a duplicate key for less than the cost of materials used in this video. :)
Thank you! Cheers!
He's insulting you @@creationholic101 you fool
Very good
👍
Thanks for the visit
The first part is a normal lock picking rake and pressure lever.
plus thie second part makes an emergency key for that lock only,,, not all locks.
Use the rake or other lock picking tools to open the lock, the superglue key can easily break off making the lock totally useless.
Openning a padlock like the one you are using only takes a piece of drinks can slid down where the shank enters the lock to open it, saves ages having to make a weak key.
Thank you for sharing your feedback
Yep, cheap locks like that can be shimmed open. There are a couple other methods that work on such locks as well.
I love the idea of using hot glue, foil tape, WD-40, graphite, baking soda, and super glue to make a key! Using a key that you already have.....wait what?
@@DarthB Probably save some money too. On hot glue, foil tape, WD-40, graphite, baking soda, and super glue.
As is usual for videos like this, they are a bunch of nonsense, or do something simple the hard way.
The first pick was just a poorly constructed rake, which was used improperly by the maker. Such a device will NOT open most pin tumbler locks - much less other lock varieties. A locksmith might take a swipe or two with a rake as a first attempt in case the pinning is poor. If that doesn't work within less than a minute, then he/she will pull out proper picks.
Interestingly enough, the rake is useless against two of the most simple lock mechanisms, the warded lock and the lever lock.
With the graphite/super glue nonsense: the molded key would be very fragile and would break in a stiff lock.
He had, the key - just take it to a hardware store or locksmith and get a key cut for a couple of dollars. Or buy a blank from an online source for about a dollar and file the blank to match the original.
Ok, the consensus finds it useless, but imagine: If your key broke in half and the store is closed or you are unable to get there this method with simple basic materials...Keep up the good work!!!😂
There are keys that you cant make copies of. Post office PO BOX keys, Bank Security Boxes, Commercial buildings, etc. They all become a problem if i lose the key. Office building is inconvenient until you get maintenance to get you another one in a day or two, PO BOX it's a $65 dollar replacement fee, if not more, Security box is even worse it's days and over $300 as they have to drill out the lock.
Technically you don't actually need the key in your possession that entire time. You just need the key long enough to make the hot glue mold and then return it without anyone being the wiser. Then you can take your sweet time to replicate it using the method in the video. But a much faster and easier way to achieve the same goal is to simply cut a bar of soap in half and keep it ready with you. Now when you get a hold of the key, just press it really hard into the soap to get a mold (you can also use certain types of clay). This works much faster, especially since you don't need electricity, a hot glue gun or the WD-40....nor do you need to clean the WD-40 from the original key. And since soap/clay has a much higher melting point than hot glue, you can heat up some low-melting point metals like Field's Metal, Bismuth, Alum, Zinc, etc.. and pour it into the soap mold to get a much more durable key copy instead of the brittle superglue/baking soda/graphite mix.
منم یه ایرانی هستم وکار شما بسیار خلاقانه هستش 👍👍👌👌
خیلی ممنون! آیا ایدههای دیگری برای پروژهها دارید؟
A Dremel diamond disc is faster than a file. I'd finish up with another Dremel item; a small grinder cylinder, diamond dust if possible.
The key copy ; You could do better though. Press in mirror box on both sides, but with Dynacast on the inside in 5mm sheets inside a 10mm gap , and bake it hard maybe or use as is. Now you coat that and fill with the mix you made there, so there's a perfect 2 sided copy. The dynacast wont stick to itself if coated with oil first. I'm a fan of Avocado oil. It's high temp stuff.
Total waste of time and money. Just file a blank to match the original - the blanks are easy enough to obtain.
What's Dynacast in this context?
When I looked it up, all I found was golf clubs.
@@TheKhopesh Dynacast plastic. It's used by machining a part in dynacast then packing it in red sand, then displacing the red sand with molten metal. Foundries use it. It's been around for years. Also if making a key copy you can use a tougher material from the auto parts store use for bolt repairs etc... a gray putty that dries hard as glass.
This video is so creative! The way you explained everything step-by-step was easy to follow. I can't wait to try this myself. Keep up the amazing work!
Thanks so much! 😊
BOLT CUTTERS....HELLO ONE SIZE FITS ALL.....HOLLA
Bolt cutters are indeed versatile tools! They can be really handy in various situations.
Love it man!!! Car dealerships want you to pay with blood for a replacement key even without the chip. Great solution.A lot of cars still have one door , usually drivers side door, that has a manual lock this method could save tons of stress and money. Wish me luck. Thank you for your efforts.
I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates
8:08 😅😂❤😅@@creationholic101
I don't think that picking works on many automobile doors any more. Locksmiths and tow truck operators use other methods for entry.
You are definitely delusional.
Hardware store still copies ordinary keys.
should download this video asap 😁😁
Thank you for watching
The first is not a key. It a saw rake and a tension wrench. FYI
I know! I thought "what the heck?" lol Easier (much easier) to just make a bump key and that's actually a REAL KEY!
Yes, a rather poorly made rake. Rakes and bump keys are used by locksmiths only for insecure locks. If those don't work in a minute or two, they pull out a proper lock pick set. @@MrPocketfullOfSteel
That is very creative .....Cheers)
Thank you! Cheers!
Tens muitas coisas que são um espetáculo,outras são fáceis mas muito úteis para quem não é habilidoso.Mesmo assim muito obrigado .Te vejo de Portugal.
Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!
Genial y muy útil gracias.
Well I was a sane locksmith. One can open a cheap Viet-Tiep padlock with about anything. To say this homemade rake will open ALL locks is the actual crazy part and beyond wrong. That is a lot of trouble to copy a key. Full disclosure I did make key imprints as a child for fun because I was a little boy. Explain the line and logic on why this video would make me crazy please. Anyone?
I'm sorry to hear that the video didn't meet your expectations. I appreciate you bringing this to my attention
@@creationholic101 I stand by my statements but appreciate your response. Truth matters. Click bait is click bait
boring
Most people value entertainment over truth/reality.
Be forever frustrated or take advantage of the glitch like this guy. He is a good entertainer.
My dad was a locksmith and a psychopath.
When I lost my house key. He made me cut a duplicate with a file...
I thought they were going to make a "Bump" key.
Thanks for sharing. 謝謝分享，南無阿彌陀佛。...
Thank you! Cheers!
Nice video. Suggestion: Instead of a jigsaw blade, you can use a blade from a street/parking lot sweeper. It has the same tensile strength as a jigsaw blade and you don't have to cut it down.
pero es mas dificil conseguir la hoja de una barredora
Good tip!
Fantastic idea. Great job.
I was doing that exact same thing in the 60's and 70's, then I found feeler gauges worked good too. Those sweeper blades were everywhere back then, now here they use some sort of bristle.
@@MegaRmac Hacksaw blades are also a potential solution, yet elegantly simple and unique.
Great video.😀
Thanks for the visit
"Absolutely mind-blowing video! Your skills and expertise as locksmiths are truly impressive. Making a key that unlocks all locks is nothing short of genius. The precision and attention to detail in your work are commendable. Thanks for sharing this fascinating process with us. Keep up the amazing work! 🔐🔑 #CreationHolic #Locksmith #Key #Lock"
It's not even a little bit "absolutely mind-blowing" if you know that what he did was make a crude wave rake. You can buy them for about $2. It's also a lie, it absolutely can't open all locks.
Thank you! Cheers!
wtf are you talking about? It didn't open one lock
🤣 Love the sarcasm.
I'm Iranian, I like it.
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
IF you already have the key, why make one?
Είσαι και ο πρώτος μεγάλος μάστορες
Ευχαριστώ πολύ! Η υποστήριξή σας σημαίνει πολλά!
Are use the metal inserts from a wiper blade for the tension wrench and the pic they work good and easy
Thanks so much for watching our video. Wish you all the best
Tanks❤
Thanks for your support! ❤
Old Wiper Blade Steel Strips... Work great for making a rake
Thank you for watching
Harika ❤
Teşekkürler! Beğendiğine sevindim!
Que incrível!
Thank you! Cheers!
Just lost 5 minutes of my life that I can't get back.
I'm sorry to hear that the video didn't meet your expectations. I appreciate you bringing this to my attention
For $5-10 I can have walmart key-kiosk machine make a copy. Might even be able to do it for 3 if I buy an uncut key, and bring it to a hardware store that still has a key-copy machine for free
Such a boring comment, while someone got creative, and made a working key out of a pencil and superglue.
@@rogiervdheide Totally agree. This is a SKILL learned. And we all can do with such knowledge.
🤣🤣🤣🤣I get keys copied for .99¢ , it cost him superglue, a pencil, baking soda plus labor and won't last a week.@@martinbisschoff988
یکی از بهترین کانالهای یوتیوب..❤به جرات اینو میتونم بگم❤
Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!
lol this is a joke
Home made versions of common locksmiths tools. Will open more than one lock but certainly will not open all.
Thank you for watching
Life is far too short _ I would use an angle grinder!
Sometimes, the quickest tool is the best option!
MUY BUENA OPCIÓN PARA NO GASTOS INNECESARIOS EN ALGO QUE SE PUEDE HACER EN CASA SALUDOS DESDE Santiago de 🇨🇱 , sigue asi amigo del canal (y)
Thank you! Cheers!
Sayın arkadaşım. Video paylaşımını dikkatle izledim.Çalışma dikkati ve titizliğiniz güzel işçilik çıkardığınızı bize gösteriyor.Biz amatör izleyenler soru sormadan geçemiyoruz. Şöyle ki,Dekupajın metal lamasının işlem sonlanmış haliyle genişliği ve et kalınlığı hakkında bilgi bekliyoruz.Çünkü kendi uygulamamızda sıkıntı görmek istemiyoruz.
Width is 3mm
Thickness is 0.5mm
0:21 interesting method to mark a line before cutting! (I know the video is otherwise a clickbait. There is normal knowledge regarding locks that I collect in playlists and does not have so many views.)
Thank you for watching
Good job dude 👍 Although in my opinion, a better and faster way to open padlocks is to pour water into the lock and put the padlock in the freezer. The ice formed will increase in volume bursting the lock from the inside. No thanks 😉
Hello! thanks for your recommendation. Wish you all the best!
Soy de mexico, y la verdad tines muchas y muy buenas ideas... felicidades
Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!
Para empezar a robar verdad jejeje seguimiento corporativo por favor.
Прикольно, молодца парень! дешево и сердито... Красава !!!
Glad you like them!
такой китайский замок и гвоздём открывается а лучше молотком...
Assalamualaikum🙏salam kenal dari surabaya🙏🙏
Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
Greetings from Brooklyn, New York, USA.
Welcome to Creation Holic channel! Thank you so much for your support
That's cute. Anyone who might want to make one of these gadgets might want to consider: in California this is a violation of Penal Code section 466, possession of burglary tools. Yes, it is "only" a 6 month misdemeanor. Every state has similar laws.
If you are caught with one of these and you are not a licensed locksmith you can expect your local police department and sheriff's office burglary divisions to forever suspect you of every burglary in their jurisdiction. No problem, you say. They have to prove it. You're right. They do have to prove it. In the mean time you'll be constantly "talked to" by those people and in the course be spending a boatload of money on attorneys.
But don't take my word for it. If you're in for a penny why not go in for a pound. You only have your liberty to lose. 🤠
Thank you for sharing your feedback.Have a good day!
درود بر شما ،بسیار از شما آموختم سپاسگزارم ❤🙏🏻اگر مداد را بسوزانیم، فقط مغز مداد باقی میماند
Hello! thanks for your recommendation. Wish you all the best!
Çok güzel fikir bende bilmeliyim
Thank you! Cheers!
Hola.... a la combinación de grafito y bicarbonato que le echas para que tome dureza?
cyanoacrylate adhesive glue
سلام.بسیار عالی و جالب بود.کارهای شما زیبا است.🙏
Thank you! Cheers!
🙏🙏
harika....
Thank you! Glad you enjoyed it!
Muy bueno Gracias por tus ideas
Thank you! Cheers!
Para empezar a robar verdad?
Pero te recuerdo también hay policías en las redes y yo podría ser uno de ellos cuidado con lo que escriven y publican siempre abra un seguimiento en TODO.
Nice to see next video turn iron to gold .
Yes, thanks
Hi, i'm from northern ireland
Welcome to Creation Holic channel! Hope you have a good time while watching the video
Hi atef from Egypt
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
Un video muy útil para todos los ladrones. Muchas gracias por sus enseñanzas.
Good ❤
الو سلام برادر خوب وعالی عالی است ❤❤❤❤
Hello,, well, I hope you are successful.
Thank you very much
Esa llave es metálica porque si fuese de grafito y bicarbonato se quiebra al hacerle presión no soy cerrajero pero mi trabajo es instalación de todo tipo de cerraduras saludos desde Barranquilla Colombia
Thank you for watching
I like the first picklock, the bad news is the padlock was maden in china. These padlocks are easy to open, they are good to practice. The clear padlock is opened easier than first one because it is to learn how to picklock any lock.
Thank you for sharing your feedback. Have a good day!
Idee interessanti complimenti
Thank you! Cheers!
Yeterince hirsiz yoktu Dünyada, Eline saglik.:)))
It will be very necessary in case of emergency
Buen video para estar entretenido y pasar el rato. Pero en la vida real la gente inteligente hace una llave de repuesto antes que se dañe la original. Saludos
C'est un bon conseil! Prévoir une clé de rechange est toujours une bonne idée. Merci pour votre commentaire !
I LOVE the molding idea. So many applications. BTW what's the graphite/soda ratio? does it matter?
Also, greetings from Greece :)
That ratio is not important, I give it a ratio of 1:1
No se cómo queda el acabado con con algodón pero también es muy resistente hechas algodón y super glu
¡Tienes razón! El algodón y el super glue pueden ser una gran combinación.
Hello new friend...i'm from South Africa
Welcome to Creation Holic channel! Hope you have a good time while watching the video
so is that water that was poured on the graphite/baking soda mixture?
cyanoacrylate adhesive glue
I guess the title of the video was referring to the lock pick or bump key you made but there's still a lot of Variables that come in to play when making a bump key... For sure the one that you made will not open all locks ..
It's true, each lock is different and requires unique modifications for a successful bump key!
Super pozdrawiam 👍👍👍👍
Dziękuję! Cieszę się, że podobał się film! Pozdrowienia! 👍
Bas koristan video idem da obijam stanove hvala za upustvo kako to da radim
Thanks so much for watching our video. Wish you all the best
خیلی عالی بود
Thank you! Cheers!
1 - Homemade lock-pick set, nice!
2 - Homemade duplicate key, a lot of time and effort. Why not have one made at a key shop or hardware store?
Or buy a blank on-line and file the blank to match the original.
Thank you! Cheers!
Iam from Sudan
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
LOL I used a paper clip to make the rake. But nice video if you have time on hand.
Thank you! Cheers!
Nice
Thanks
Buen trabajo
Hello! thanks for your comment. Wish you all the best!
درود
من از ایران بر تمام مردم جهان سلامتی و شادی ارزو میکنم ❤❤
سلام! سپاسگزارم و برای شما هم آرزوی سلامتی و شادی دارم. ❤
Muy bueno parce
Thank you! Cheers!
سلام استاد خسته نباشی خیلی خیلی جالب بود مخصوصا دومین ایده دست دردنکنه ممنون ❤❤❤❤❤
When I saw the mix with baking soda, I understood what would be next. In simple words, if you see baking soda, you know the next ingredient for sure
Thank you for watching
Who taught you how to safely use that craft knife 😇
very good 👌👌👌👌👌👌
Thank you! Cheers!
amazing
Thank you! Cheers!
Pattani thailand ,❤❤❤
Thank you! Cheers!
Grazie ❤ Italia centrale
Thank you for watching
Excellent hobbie thank you 🙂
Thank you! Cheers!
Bou travail merci qour les aider MAROC
Thank you! Cheers!
Good ❤❤❤
Glad you like them!
C'est génial
Thank you! Cheers!
Alot of work when all you need is the piece of metal from a windshield wiper blade.
Thank you! Cheers!
Nice Vid
Thank you! Cheers!
Just a little trick to make the key easier :
You can use baking soda instead of graphite, mixed with Super Glue ( cyanoacrylate glue ), it works even better to create a strong key ( or anything else, like a undetectable but deadly knife or pick to stab a guy, very useful in jail for example ).
Glass powder works also very well, but would probably be too hard to cut the key with a simple cutter.
Thank you! Cheers!
I thought you said the key will unlock all locks. All it is is a duplicate key made with a lot of labour and risk to safety when it is easier to go to the key cutters and get a new key cut.
I'm sorry to hear that the video didn't meet your expectations. I appreciate you bringing this to my attention
Perfect solution. Thanks for this.
Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
muy bueno
Thank you! Cheers!
Sticky tape for the key pattern outline for only basic keys L7 etc etc
Great tip! Sticky tape is a smart way to outline the shape for those basic keys.