I subscribed! Im always on the move so I been using a gaming laptop. But I want to get a PC cause so far i been spending months at a time a place not just weeks.
Hello, do you have recommendations for sff pc case that does not use riser cable in the Philippines? Something like the Deepcool CH160 but much smaller
This will depend on the build that you want to pursue. For riser-less builds below 5L, your route is only thru APU builds. Asrock deskminis, inwin chopin, and sktc a09. For below 10L, there are some matx with options for low profile gpus such as Sktc ux02. There’s also mechanic master c24 but it costs a bit, it can fit short but regular gpus. Both cases are untested, can’t say I’d recommend at this point but something that I’m looking at. For 15L, there’s ssupd meshroom d, available via amazon and can be delivered to PH and exempted from customs tax. Zzaw c2p will also fit this criteria, it is matx compatible but I wouldn’t dare put large gpus in it based on exp. Bigger would be: old nr200p and hyte revolt 3. On the side, Mechanic master might be worth looking based on your requirement. Also based on exp, if you expect regular size gpu’s, space efficiency is bad for cases below 14L that is not a sandwich style/riserless. This is why you only see more of this layout in >15L cases.
@@manongunboxing Thanks for the response! Mechanic master c24 might be the one I'm looking for, but I'm not seeing much reviews about it. Will you try that in the future?
@@manongunboxing Thanks for the reply! Okay it turns out that I'm looking for something small :), like the DAN A4H2O, I read that people were able to insert two WC radiators in it. Is the DAN A4H2O fine in your opinion?
It is what it is. 26C ambient 4070Ti Super 240mm aio Programs are: Cinebench r24 - 30minutes run Cinebench r23 - 30minutes run Ffxv benchmark in 4k high and 1080p medium - 5 iteration and borderless All on average temps using hwi.
@@manongunboxing I believe you but it is kind of high for CPU including bottom fans... I have mine arriving today and will see. Atm I have some mesh case vertical but I have some issues wit it and wanted to try that one. Lets hope it will be fine hehe
Thanks for informing and I’ll check on my side. Tbh, I didn’t know that there’s a music on youtube survey. I mainly watch on tv, maybe it wasn’t pronounced much but yeah, I’ll check. Thanks
you should put some efforts on your cable management situation here, i have the same case same mobo and same cpu but with a zotac card , and 4 top and bottom lian li SL120 V2 fans, i never reach 65°C on heavy load using tg glass and 60 using mesh side panel, and still have more space for air to circulate and find its path, when i saw this build i was like what the hell he didnt care about organizing the cables, there are so much clearence on the frnt of the case, and the back of the mobo section also use that and remove as much as you can otherwise you wont even be able to continue on ITX, the spaces that should be used are never used, you might wanna get a look at some optimum tech and devyn jhonston to learn more about itx
Good you included the errors (i made some of these too^^), good vid for future builders!
Love the build.
Velka 3 review pls
First of all thank you 🙂
Re: velka 3, I really want one but I’m reluctant due to import tax that will hit me. If stars align properly, I will buy one.
I subscribed! Im always on the move so I been using a gaming laptop. But I want to get a PC cause so far i been spending months at a time a place not just weeks.
Have the same build but with rtx 4080. My temps wouldn’t go higher than 70deg on heavy load
Hello, do you have recommendations for sff pc case that does not use riser cable in the Philippines? Something like the Deepcool CH160 but much smaller
This will depend on the build that you want to pursue.
For riser-less builds below 5L, your route is only thru APU builds. Asrock deskminis, inwin chopin, and sktc a09.
For below 10L, there are some matx with options for low profile gpus such as Sktc ux02. There’s also mechanic master c24 but it costs a bit, it can fit short but regular gpus. Both cases are untested, can’t say I’d recommend at this point but something that I’m looking at.
For 15L, there’s ssupd meshroom d, available via amazon and can be delivered to PH and exempted from customs tax. Zzaw c2p will also fit this criteria, it is matx compatible but I wouldn’t dare put large gpus in it based on exp.
Bigger would be: old nr200p and hyte revolt 3.
On the side, Mechanic master might be worth looking based on your requirement.
Also based on exp, if you expect regular size gpu’s, space efficiency is bad for cases below 14L that is not a sandwich style/riserless. This is why you only see more of this layout in >15L cases.
@@manongunboxing Thanks for the response! Mechanic master c24 might be the one I'm looking for, but I'm not seeing much reviews about it. Will you try that in the future?
@@parasasasaulovs C24 -- soon. November or Decemeber. I have it on hand already.
@@manongunboxing nice!
Does this support select MATX motherboards?
No it can’t
Is it possible if you can make a video with the "most" budget APU build SFF along with the link where to buy in Ph?
Thank you 😊
Thanks for the idea, I'll take note.
Amazing review! I'm looking for a good case that can hold two AIO water cooling (CPU+GPU). Is the NR200P V1 good enough or is there a better case?
Hi, thank for watching.
Meshroom S is a good candidate
@@manongunboxing Thanks for the reply! Okay it turns out that I'm looking for something small :), like the DAN A4H2O, I read that people were able to insert two WC radiators in it. Is the DAN A4H2O fine in your opinion?
how the hell are you getting that 7800 that hot LOL my 7900x3d with 280 AIO Bequiet on silent mode (inaudible really) running at 5GHz it at 64C XD
It is what it is.
26C ambient
4070Ti Super
240mm aio
Programs are:
Cinebench r24 - 30minutes run
Cinebench r23 - 30minutes run
Ffxv benchmark in 4k high and 1080p medium - 5 iteration and borderless
All on average temps using hwi.
@@manongunboxing I believe you but it is kind of high for CPU including bottom fans... I have mine arriving today and will see. Atm I have some mesh case vertical but I have some issues wit it and wanted to try that one. Lets hope it will be fine hehe
Does the riser cable come with the case or do you have to buy it separately?
Yes, it comes with a riser
@@manongunboxing thx
whats with the UA-cam survey music on the background?
Thanks for informing and I’ll check on my side. Tbh, I didn’t know that there’s a music on youtube survey. I mainly watch on tv, maybe it wasn’t pronounced much but yeah, I’ll check. Thanks
you should put some efforts on your cable management situation here, i have the same case same mobo and same cpu but with a zotac card , and 4 top and bottom lian li SL120 V2 fans, i never reach 65°C on heavy load using tg glass and 60 using mesh side panel, and still have more space for air to circulate and find its path, when i saw this build i was like what the hell he didnt care about organizing the cables, there are so much clearence on the frnt of the case, and the back of the mobo section also use that and remove as much as you can otherwise you wont even be able to continue on ITX, the spaces that should be used are never used, you might wanna get a look at some optimum tech and devyn jhonston to learn more about itx
Thanks for the comments, I'll take note.