Відео

i think with some fabrication, an sfx-l can be fitted

Where to buy? do you have a link?

I hope you can compare it to Thermalright SI-100

Manong new subscriber here. gusto ko sana mag build ng ITX. Ano mga recommend mo ITX cases ngayon?

Mas maganda para saken ang gpu na 2 compare sa aisurix. Almost 2yrs ko na syang gamit, halos everyday ung pag gamit ko sa pc ko. Hanggang ngayon wla pa naging issue sa perf at maski sa drivers, ung drivers atleast kahit papaano may mga updates pa din na bumababa. Hindi ko pa nabuksan mismong gpu at hndi ko pa napalitan thermal paste and cooling pads. Until now wlang pagbabago sa perf.

does it still work til now?

3:11 hahahahahahahahahahah

Kaya ba sir isang standard arctic p12 fancsa top?

Hi, would you recommend getting this one or the Gigabyte Windforce OC one? Also is there any coil whine?

Dear Manong,do you know if you can fit a 240mm AIO Radiator on the top?

Planning to build this one as well sir, nice build! question lang din po possible ba yung tforce delta ram dito with thermalright axp90 coolers?

These cards are used mining cards.

How is the noise if this zotac twin edge card?

been using it for a couple of monthes now (more or less 1.5-2) and its fine, but i still want to downgrade to smthn sub10l (maybe shiny snake s300 or luoqe ghost s1 / acat x1) the case itself often goes on sale on newegg (-10%) also worth to mention that the case has significantly better temps on inverted setup (gpu on top) and the other thing to mention - if you are planning on using ATX psu and big/long GPU then you should reconsider it, i have sfx-l psu and it was quite challenging to fit with sapphire nitro 7800xt

nice build idol powertrain p60 next mo ireview idol ksi i want swap my msi mag forge m100r matx case eh

How much did you fasten the screws? Until you can't turn them anymore? I'm really scared to damage my cpu ^^

Have you ever install any aio cooling in any sff case?

Have you tried a load test on the 500w? How is the fan noise?

Nice video! Should I got this zotac 4070 super or Palit super dual?

Qual a temperatura ideal?

I recently bought myself an rx 6800 sapphire in a good online store and started playing - in some games everything is fine, in others a solid green screen pops up, an unpleasant repetitive squeak and the problem with rebooting was solved by lowering the video frequency of the core from 2300 to 1700, but you understand that this is a 20% loss in performance, which I did not like at all. Having climbed the entire Internet and forums, I could not solve this problem in any other way, neither the temperature, nor the power supply, nor the processor are to blame here, everything happens only on this video card, which on my last 1050 for 8 years there were no problems. I returned it back to the store, they said that the problem was in the firmware, they slightly changed the firmware (at home I noticed that the firmware was really changed in that the min and max periods were different). The problem was not solved at all. more additional information - in some games the green stuff pops up after a second, in some games you can play for 10 hours and nothing will happen, so I didn't even notice the problem of the first week. fortnite - ok, beamng - crash, cyberpunk - crash, but rare. Sometimes it crashed on the desktop, from telegram and other games. The problem is not related to the settings, for example, all stress tests (furmark, donut, superposition, 3dmark and the test from AMD Adrenaline itself, stability and order for an hour, even when increasing the frequency to 2500). I thought the video memory, tested the occt video memory - no errors, the video core - no errors. Started with other components - no errors. All components worked properly on my 1050, now the green stuff is on the new one. I don't know anymore what this could be connected with. The problem is related to the fact that all the problems continue on b450 motherboards. I am writing the characteristics of the 800w power supply unit, I bought it new with a video card, an expensive ryzen 5 5500 b450 asus tuf games 2 16gb RAM (one APAC strip, the second Kingston, works in overclocking, I tried to turn on the PC without overclocking the RAM - the problem persisted) Windows 10 also had problems with the video card - 1 and 3 RAM slots do not work at all. Even with one flag for 1 or 3, with all variations. No way. 2 and 4 slots work with some limitations. In one of the bright strips, the PC does not start, the second time it will start. It happened that the combination was correct, but still did not start, but it was decided to start the PC with one strip, turn off, and start with two strips. I tested the RAM with a meme test for 4 hours - everything is fine on both strips. In channels 2 and 4, the strips work fine one by one. Once I overclocked the processor incorrectly, it turned off the whole system from overheating - I didn't understand why it crashed, I looked at the temperature, it was 115, but it didn't undervolt, which is strange, like on Intel. After each reboot, the RAM stopped working from such overheating, which is why the flags changed places, started, then again in places and it started working. If you just activate it - a black screen. Sounder got the corresponding error for two long times. This is all very strange, experts help, I've already tried everything, brought it to the service - nothing, what should I do? Maybe I should replace the motherboard under warranty?

Good video thanks.

So it reaches 80 ish temps on 4k?

... maybe it's because of your funds but that's such. A. Lowwwwwww end build....

The small variation at 89 degrees is because the 7800x3d CPU has a tjmax of 89 and thermal throttles at that point. I think smaller coolers can keep the 7800x3 cooler, what were your fan speeds?

Probably was worth to add RAM/VRM temps since low profile coolers also affect their temps (in a better way) as collateral :) The cooler itself is too tall impo, with 115mm clearance you can fit silversoul110 or si-100 both of which will likely outperform it while gonna cost significantly less

Etoh iniisip ko sa build ko.. 7800x3d + 4070 super... Para nabbitbit ko sa opisina pag walang gagawin hehehehe

Thank yhis ice drtveviee0tebari.

I got ddr5 6000 cl 36 36 36 76 working on Crucial Pro DDR5 6000 sticks. August 2024 bios.

Hi manong. Plano ko mag sk hynix platinum p41 storage, kaso kailangan ata ng heatsink . May idea kaba kung magkaka clearance prob ako kung for example 4080super yung gpu ko? Sfx psu at peerless assassin 120se aircooler. Thx!

Best GPU is probably the Gigabyte RTX 4060 8gb Windforce OC (L=192 W=120 H=41 mm). This will also fit the ZZAW A1P as it is smaller than Sapphire RX 6600 by few mm.

Need ng additional holes sa side panel para mas malapad ang ventilation ng dual fan video card. In that case pwede mo sya ipa-mod para mag improve yung cooling.

have the same case but reverse airflow. i let the cooler pull air from rear then top and front exhaust

i was looking for a sff case that can fit my matx mobo and atx psu and found this video. have you tried that combo set up? did you encounter any issue with spacing?

overall - skip

What gpu riser do you recommend with the atx built

I've bought this case but with the mesh sides. While I'm waiting on it arriving, I'm planning my build but I'm confused. The case says it supports cpu radiator height 60mm but I looked up the Alpenfohn Black Ridge and it's only 47mm height yet you're struggling to fit it. I saw the comment about using the stand offs for more space but this seems quite a difference. Can you clarify please?

Probably my futur case, in white, with the Deepcool Assassin 4S for CPU fan. And with the Air Panel 100 accessory to replace the glass panel cause I'm not a fan of glass panel and I prefer a good airflow.

This or 7900xt 🤔🤔 in gaming

Thanks for the video. What about heatsink clearance? Could it fit a Noctua NH-L9x65 (65mm)?

Hello sir. Kamusta po yung gpu working parin po ba?

Can you make an update video on the BIOS?

I have the question. Can i fit gpu of 51mm thickness?

hi, that’s the max dimensions of a gpu that can fit in here? can a igame ultra white oc rtx 3070ti fit in here?

2:15 any recommendation for undervolting settings for Palit 4070 Super? I'm trying to lower gpu hotspot and gpu temp but not sacrificing much on performance. I followed other user's guide which sits currently 0.900V @ 2550 Mhz Core and +1000Mhz Memory Clock. I'd like to know if anyone has made it more efficient?

Kano budget sa build na ganyan manong?

still waiting for new bios...

Hi how is the temps compared with i100 pro ? Since i100 pro is much cheaper

35k nlng siya ung dual OC version sa may Gilmore ska mga ibang shops sa FB marketplace bnew sealed. Yung iba pwde pa matawaran sa 34k.

boss kasiya ba yung 6900 xt na tuf 320 mm