I've got this guitar interface, and I've been using it for quite some time. And I love every minute of it. It gave me the opportunity to try simulations from amps, which are way out of my budget(JCM 900, SLO 100).
It comes with every hardware you buy from IK. You have a basic version, with almost all you need, like Delay, Compressor, Chorus, Flanger, Distortion, Wah, etc... I bought a second hand HD 2, then bought a second hand BlueBoard, then, bought 2 second hand EV-5 from Roland (bought one yesterday for $30 CDN at a pawn shop; like new), 1 for volume and the other for expression (assign to the Wah). Around $200 setup, but useful as a $500 multi effect. 5 stomp effects would've cost more than that $500. I can plug it in the amp, or play with headphones. It's a very useful little thing. And can carry all my rig in a pack sac, except for the amp.
Hi regards from India I'm looking iRig for my iPad for live singing and Recording vocals and instruments Could you please suggest which iRig will be the best to buy.
Hey I just ordered this online after saving up for months and I’ve been wondering can I use the app Tonebridge on my IPhone XR to use pedals through the Irig? Thanks:)
I have an Amp that sits at my practice room. If i buy this device and a set of headphones will i be-able to use the device, My Phone, the headphones and my guitar to play and record ideas. So what i need to know is will i need my guitar amplifier ?
Just got a free amp sim (Black Sun) and need a low cost interface (don't want to spend much in case I don't like it...my first time with a guitar computer amp). Wife works at home so I need to keep volume to a minimum so this is worth a try. Will this work with a Windows 10 PC? Also, will my Yamaha drums (1/4 in jack like guitar0 work with Irig2? Thanks! Great video!
None of the videos or retailers seem to explain how the iRig connects to iPhones that don’t have 1/4” Jack outputs. It just says it is compatible. How? Does it have a lightning port? And can I connect Bluetooth headphones?
I have a guitar, amp, irig 2 and iPad. I want to play my guitar with the effects through my amp but I cannot get any sound of my guitar through the amp. What can I do?
iRig 2 is the second generation of the original iRig guitar interface. It also accepts line-level input so you could send any mono/single line level source into it as well. For compatibility with devices other than iOS devices, please check the full specs at www.ikmultimedia.com/products/irig2/index.php?p=specs and note it will work with some Mac computers too.
Which irig model should I get if I want to make UA-cam video on Android phone? I want to connect a keyboard to my Android phone and record a video with the audio from the keyboard.
AmpliTube iOS does www.ikmultimedia.com/products/amplitubeios/index.php?p=specs as does iRig HD 2: www.ikmultimedia.com/products/irighd2/index.php?p=specs
I have the I rig 2. Non HD. And I also bought amplitube 4. Is there a way to listen to it through just the iPad or headphones. I can’t find a tutorial anywhere as to how to get sound. Is there another pack I need to buy or what. Please help as I’m new to this. Cheers
You can plug headphones into iRig 2. When an audio interface (any, not just ours) is plugged into an iOS device, iOS will no longer route the audio through the device speakers. This is an iOS limitation not the interface/irig. Please find more information in this FAQ www.ikmultimedia.com/faq/?id=1284
I am using my iPhone's camera to record me doing Drum Covers but I want to bring in a clean audio feed of the music and the sounds from my drum module into the iPhone. I have everything hooked up to the iRig HD2 and it doesn't work. Its not allowing any sound to get into the iPhone. What I hear when I play back my video is me hitting the pads and no music and certainly no drum sounds. My goal was to do some Facebook, Instagram or Tik Tok live streams and have a good clean sound coming from my drums into my iPhone 8 Plus using iOS 14.4. I was trying to eliminate making videos with another camera and then syncing the audio in post production but I don't know any other way to make this work for streaming. Thoughts?
Hi, please note that iRig HD 2 is a single-input/mono adapter that is primarily used for guitar input but also accepts line input. You'll only get one side of your drum output unless you use a multichannel interface like our iRig Pro Duo I/O or similar. With iRig HD 2, please make sure you are sending only one channel (usually the left is the mono output on many drum modules) and that it is line level. Another thing to note is that not all social apps accept digital audio interface input for audio streams. But iRig HD 2 should definitely work with streaming/social apps that support digital audio interfaces
iRig HD 2 does not drain your iPhone battery, but if you need to keep your device charged, you can use iRig PowerBridge with iRig HD 2. www.ikmultimedia.com/products/irigpowerbridge
That's what I use right now, because my old Peavey Pro Fex II died because of the battery leaked (scraped the board). I searched for something to allow me to play with headphones, and that is what this thing do. But you can also use it as a multi effects and plug it in the amp. And it works for me without any flaw, but you'll have to work just a little to find the best setup for your needs. Btw, if you can find a non registered second hand one, you'll pay less and have access to IK basic softwares (which are way enough for my needs).
Can you tell me what type of cable do you use to plug in into the iPad Pro in the single USB-C port , does the irig HD can connect into the single USB-C port on the iPad Pro (apple)
Hi Guys, I'm trying to connect the irig hd2 to my Ipad running amplitube 5 through a Fender Super 60 but I can't hear the sound processed, just when I set the switch on the irig to thru it works with the clear sound, anyone knows where I'm wrong? Thanks
Hi there, I just bought it, but the latency is horrible and sucks. Im using iRig HD2 + iPhone SE - even in headphones is latency, through Fender combo is same - latency which I cannot play with. Sorry, but Im really disappointed.... Any advices please (before I will send iRig HD2 back)? Thanx
You should have nearly inaudible latency like with any proper audio interface. I would recommend working with IK Support via www.ikmultimedia.com/contact-support as they can definitely assist you and get you up and running.
iRig HD 2 is an audio interface so you should be good with it and AmpliTube. If you want to go premium on Mac/PC, you can look at AXE I/O which is a high-end audio interface with great guitar tone-shaping abilities and AmpliTube integration: www.ikmultimedia.com/axeio/
camille wray i personally use it with tonebridge and i dont think ive ever experienced any better setup than it, i havent experienced any issued whatsoever with it, so yah get tonebridge+irig = :)
No, the iRig HD 2 is a single input device. The second 1/4" port is a dedicated amplifier output. For a multi-channel mobile interface, see the iRig Pro Duo. Read more here. www.ikmultimedia.com/products/irigproduo
Yes. Note, though, that you get to unlock the gear from the $20 version of AmpliTube for iOS and get AmpliTube 4 for Mac/PC free. AmpliTube has been the leading guitar amp/gear software for quite a long time, and you get it free to also use with iRig HD 2! www.ikmultimedia.com/irighd2
While a D.I box can be useful depending on the Mixer. The iRig HD 2 will send an unbalanced signal out of the AMP OUT port, this can go straight to a mixer Hi-Z input without any extra gear.
iRig HD 2 works with any audio program compatible with digital audio interfaces. AmpliTube 4 is a great example of a compatible program. This software is actually included with registration. Read full details here: www.ikmultimedia.com/irighd2/
Hi again :D So if I use the output with an amp, I will only be able to use the device as a stompbox (pedals) right? Because the sound will be the sound of my amp and not amplitube's amp, I suppose...
I know this comment was two weeks ago and may already have been answered, but from what I can tell you can control whether your Amplitude profiles come through your amp or if it's just a clean signal with the Thru FX switch
We offer the iRig Pre HD, iRig Pre, and a bunch of other great inputs for XLR microphones. www.ikmultimedia.com/irigprehd/ Unfortunately, we do not have anything for USB microphones specifically.
For Windows compatibility you would want to look into our USB audio interfaces like iRig HD 2, iRig Pro Duo, and similar on our web site www.ikmultimedia.com/irighd2
You can find out shipping costs and such to your area using our web shop at www.ikmultimedia.com/shop and you can also find your nearest IK dealer at www.ikmultimedia.com/dealers
ikmultimedia Yes. I already visit the ik dealers near ours, but they say they only have hd for now not the 2 version. And its November now. They say late september. 😒😒😒
iRig HD 2 connects to compatible iOS devices via Lightning and Mac/PC via USB. If you have a device with micro USB that runs Android OS you would want to look at our interfaces for Android www.ikmultimedia.com/android
iRig HD 2 and AmpliTube will not drain an iOS device in 30 minutes, but to charge your device while using iRig HD 2 yes you can use iRig PowerBridge www.ikmultimedia.com/irigpowerbridge/
Definitely a device issue. Your phone is struggling to run amplitube or whatever app you’re using. Not all apps are created equally. An iPhone 6 may struggle with certain apps when newer phones will never. Used to sell and repair phones...
On my modeling amp it’s not working, only have the sounds on headphones....on my amp it’s the clean from the modeling settings! Are there any solutions?
Beau Jenks hey I am wondering on the output to the phone. Since it uses a lighting cable to the charging port of the phone, does it by any chance recharge the phone or would I have to cut short the show when my phone battery goes low? I am debating if to buy Irig 2 HD, irig 2 or the Irig 2 Streamer
Yes, an app like AmpliTube for iOS is required for the iRig HD 2 to operate properly. On Mac/PC some kind of DAW or audio software will also be required.
The iRig HD 2 features a mono input designed for guitar or instrument input. While an electric drumset can physically be hooked up and will work okay, the best solution for a stereo sound would be iRig Pro Duo I/O or iRig Stream. Read more at the following links. www.ikmultimedia.com/irigproduoio www.ikmultimedia.com/irigstream
My IRIG HD2 doesnt work, it works when i connect it to the Laptop it shows the bright blue light that turns green when i play the guitar, but on Iphone both iphone 5 and 14 pro max it doesn't work. It simply glows blue dimly and never detects the guitar input. It will transfer the sound to the amp but the Phone can't find any guitar input.
Hi @zepyh3401, I'm sorry to hear you are having trouble. Our IK Support team can assist you via www.ikmultimedia.com/contact-support - simply search the FAQ there and if you don't find the answer there will be a button to open a ticket directly to our helpful techs! Thank you.
@@ikmultimedia i’ve gotten a message saying someone created a ticket or something but they haven’t gotten back in 1-2 days now, i really was enjoying the product but it only lasted 1 day.
such greetings from Guatemala .. could you help me? because when I connect my guitar to my irig 2 does not sound in real time? what am I doing wrong? the app I use is called AndRig for android. Thank you...
When using iRig 2 or similar interface on a device that does not support Samsung Pro Audio, you will likely experience latency due to the Android OS audio latency issues. For low/no-latency on Android devices that do not support Samsung Pro Audio, you would want to look at iRig UA + AmpliTube UA: www.irigua.com
I’m a little late and I’m hoping anyone could get back to me with an answer but I’ve had this irig for quite some time now and it works great but there’s one big issue, the usb to lightning cable comepletely stopped working after only 2 months of having it. Does anyone know if I can buy and use an average lightning to micro usb as a replacement rather than purchasing the ik multimedia cable for a whopping 30$ just to probably have it fail on me within a couple of weeks once more. From the research I’ve done I am far from the only one experiencing this issue so if anybody who’s tried could confirm for me I’d rlly appreciate that🙏
@@SuperKillbill66 I have a BlueBoard, and it's work. There is a 4 assignations max for foot switches, and 2 expression pedals connectors. You can choose what you want assign for each of these four switches. Thought that it was not enough, but, finally, found out that it's way enough for my needs.
If you mean iRig 2, you can use that with many Mac computers, yes. However that is an analog interface that plugs into the headphone combination input/output jack and will not provide as pristine and high-quality sound as iRig HD 2.
Interfaces that plug directly into the digital port of a device or the USB port on your computer will sound better than analog devices that plug into the headphone jack. You can compare the details of our interfaces, as there are other differences, at www.ikmultimedia.com/products/irighd2/index.php?pp=irig-hd2-range
This is the latest version of iRig HD yes. The list of compatible devices can be found at www.ikmultimedia.com/products/irighd2/index.php?pp=irig-hd2-specs
The gear within each version of AmpliTube is outlined on that version's web page. You can find a link to each member of the AmpliTube family here: www.amplitube.com
ikmultimedia I have purchased irig hd 2 since October 7 through MallForAfrica. since the then it has not reach MallForAfrica warehouse to reach me in Nigeria.
Check out our FAQ for the iRig HD 2. This includes some great steps on setting up and optimizing Windows/PC set ups. www.ikmultimedia.com/faq/index.php?category=13&topic=irig-hd-2
You will receive AmpliTube 4 in your IK User Area when you register iRig HD 2 and the models from the full version are unlocked in AmpliTube Free upon registering iRig HD 2 in the app.
Hey guys, does anyone know how to convert the Mono AMP output at the top into a pair of stereo speakers? I want to listen to what im mixing while I DJ But its only coming out of 1 speaker. Im not using a mixer. Your help would be amazing thank you!
![[Eng Sub] IK Multimedia iRig HD2 - audio interface for guitar players](http://i.ytimg.com/vi/eOrZcEtNMoY/mqdefault.jpg)
I've got this guitar interface, and I've been using it for quite some time. And I love every minute of it. It gave me the opportunity to try simulations from amps, which are way out of my budget(JCM 900, SLO 100).
Every guitar player should have one. I wish AmpliTube was cheaper tho
It comes with every hardware you buy from IK. You have a basic version, with almost all you need, like Delay, Compressor, Chorus, Flanger, Distortion, Wah, etc... I bought a second hand HD 2, then bought a second hand BlueBoard, then, bought 2 second hand EV-5 from Roland (bought one yesterday for $30 CDN at a pawn shop; like new), 1 for volume and the other for expression (assign to the Wah). Around $200 setup, but useful as a $500 multi effect. 5 stomp effects would've cost more than that $500. I can plug it in the amp, or play with headphones. It's a very useful little thing. And can carry all my rig in a pack sac, except for the amp.
Just use Tonebridge
If anyone is trying to remove the Velcro clip, you pull up on the tab and slide towards the 1/4” jacks.
Can I use a condenser microphone on that "instrument/guitar" or the "amp" jack?
Can this be used to practice thru quietly with bass and play along with UA-cam videos?
So instead of buying multiple pedals I can just buy an irig and plug it with my phone and amp?(i’m a beginner)
Hi there, is it possible to have background and guitar sounds from amlifier output?
Can you Bluetooth from amplitude to a Bluetooth speaker? Or is there a update in the works for this option?
Has the background music been ripped from the Foo Fighters?
Yeah it does sound like Everlong
Hi regards from India
I'm looking iRig for my iPad for live singing and Recording vocals and instruments
Could you please suggest which iRig will be the best to buy.
den you have to buy focus rite audio interface
Hey I just ordered this online after saving up for months and I’ve been wondering can I use the app Tonebridge on my IPhone XR to use pedals through the Irig? Thanks:)
Yes you can!
ikmultimedia great! Thansk for answering
Can I use it on Android too?
I have an Amp that sits at my practice room. If i buy this device and a set of headphones will i be-able to use the device, My Phone, the headphones and my guitar to play and record ideas. So what i need to know is will i need my guitar amplifier ?
Wesley Currin Bro No! You Have The Guitar! You Have Pick Ups On Your Guitar Right? They Pick Up The Sounds.
Don’t need an amp I use it with headphones all the time
No, but you can use it if you like
Hello does the rig 2 sound. A lot so can it carry the sound that a normal. Amp can give
Just got a free amp sim (Black Sun) and need a low cost interface (don't want to spend much in case I don't like it...my first time with a guitar computer amp). Wife works at home so I need to keep volume to a minimum so this is worth a try. Will this work with a Windows 10 PC? Also, will my Yamaha drums (1/4 in jack like guitar0 work with Irig2? Thanks! Great video!
What can I use for Android, Samsung Galaxy Note 9, Samsung Galaxy View2, Samsung Galaxy Tab s5e? Or am I just going to have to get an iPad?
None of the videos or retailers seem to explain how the iRig connects to iPhones that don’t have 1/4” Jack outputs. It just says it is compatible. How? Does it have a lightning port? And can I connect Bluetooth headphones?
iRig HD 2 connects via Lightning or USB. More information is available at www.ikmultimedia.com/products/irighd2
I have a guitar, amp, irig 2 and iPad. I want to play my guitar with the effects through my amp but I cannot get any sound of my guitar through the amp. What can I do?
Can this be used for an Ns nxta electric cello/violin too?
do you get the fully unlocked version of Amplitube with it, if so how do you unlock it cause I just got my irig hd 2
You can see what is included with iRig HD 2 and how to unlock it here: www.ikmultimedia.com/products/irighd2/index.php?p=apps Thanks!
Why is this only advertised for guitars? Is it only for guitars and Apple products?
iRig 2 is the second generation of the original iRig guitar interface. It also accepts line-level input so you could send any mono/single line level source into it as well. For compatibility with devices other than iOS devices, please check the full specs at www.ikmultimedia.com/products/irig2/index.php?p=specs and note it will work with some Mac computers too.
Which irig model should I get if I want to make UA-cam video on Android phone? I want to connect a keyboard to my Android phone and record a video with the audio from the keyboard.
The iRig Stream Solo would be a great device for you to look into. Read more here: www.ikmultimedia.com/products/irigstreamsolo
Does the iRig HD 2 and the latest Amplitube for iOS still work with an iPod touch, or only iPhone and iPad?
AmpliTube iOS does www.ikmultimedia.com/products/amplitubeios/index.php?p=specs as does iRig HD 2: www.ikmultimedia.com/products/irighd2/index.php?p=specs
Can't unlock the full version of iOS amplitube 😕
I have the I rig 2. Non HD. And I also bought amplitube 4. Is there a way to listen to it through just the iPad or headphones. I can’t find a tutorial anywhere as to how to get sound. Is there another pack I need to buy or what. Please help as I’m new to this. Cheers
You can plug headphones into iRig 2. When an audio interface (any, not just ours) is plugged into an iOS device, iOS will no longer route the audio through the device speakers. This is an iOS limitation not the interface/irig. Please find more information in this FAQ
www.ikmultimedia.com/faq/?id=1284
I am using my iPhone's camera to record me doing Drum Covers but I want to bring in a clean audio feed of the music and the sounds from my drum module into the iPhone. I have everything hooked up to the iRig HD2 and it doesn't work. Its not allowing any sound to get into the iPhone. What I hear when I play back my video is me hitting the pads and no music and certainly no drum sounds. My goal was to do some Facebook, Instagram or Tik Tok live streams and have a good clean sound coming from my drums into my iPhone 8 Plus using iOS 14.4. I was trying to eliminate making videos with another camera and then syncing the audio in post production but I don't know any other way to make this work for streaming. Thoughts?
Hi, please note that iRig HD 2 is a single-input/mono adapter that is primarily used for guitar input but also accepts line input. You'll only get one side of your drum output unless you use a multichannel interface like our iRig Pro Duo I/O or similar. With iRig HD 2, please make sure you are sending only one channel (usually the left is the mono output on many drum modules) and that it is line level. Another thing to note is that not all social apps accept digital audio interface input for audio streams. But iRig HD 2 should definitely work with streaming/social apps that support digital audio interfaces
@@ikmultimedia thank you for the response! I will definitely look into this!!!
Does it support piezo based pickup guitar?
Charging on the gig? Does the power come from iPhone? And when battery dies?
iRig HD 2 does not drain your iPhone battery, but if you need to keep your device charged, you can use iRig PowerBridge with iRig HD 2. www.ikmultimedia.com/products/irigpowerbridge
It is possible for DJ to use it in live stream
Yes.
Can I put effects through the app Tonebridge with the device?
Yes. iRig HD 2 works with any apps that accept digital audio interface input.
Can i use the amp output in the mixer with a 1/4” cable instead ?
I have an electric guitar and a Marshall amp...can I use this instead of buying expensive guitar pedals?
Yes, that's what it does. You still need a computer or IOS device in the middle, though.
That's what I use right now, because my old Peavey Pro Fex II died because of the battery leaked (scraped the board). I searched for something to allow me to play with headphones, and that is what this thing do. But you can also use it as a multi effects and plug it in the amp. And it works for me without any flaw, but you'll have to work just a little to find the best setup for your needs.
Btw, if you can find a non registered second hand one, you'll pay less and have access to IK basic softwares (which are way enough for my needs).
Get a Kemper Profiler
Can you tell me what type of cable do you use to plug in into the iPad Pro in the single USB-C port , does the irig HD can connect into the single USB-C port on the iPad Pro (apple)
There is a USB-C cable that works with iRig HD 2 available www.ikmultimedia.com/products/index.php?R=SHOPSEARCH&Q=usb-c
Hi Guys, I'm trying to connect the irig hd2 to my Ipad running amplitube 5 through a Fender Super 60 but I can't hear the sound processed, just when I set the switch on the irig to thru it works with the clear sound, anyone knows where I'm wrong? Thanks
Does this include the Soldano SLO 100 amp model?
It does not, but it unlocks quite a lot of gear. You can find all of it here: www.ikmultimedia.com/products/irighd2/index.php?p=apps
@@ikmultimedia Is it possible to buy the Soldano SLO 100 amp model as an add on for this when using with iOS? Also does it work with an iPod touch?
Yes, you can find the SLD-100 in the iOS version of AmpliTube
Hi there, I just bought it, but the latency is horrible and sucks. Im using iRig HD2 + iPhone SE - even in headphones is latency, through Fender combo is same - latency which I cannot play with. Sorry, but Im really disappointed....
Any advices please (before I will send iRig HD2 back)? Thanx
You should have nearly inaudible latency like with any proper audio interface. I would recommend working with IK Support via www.ikmultimedia.com/contact-support as they can definitely assist you and get you up and running.
Will it works when i just use ins/ line in n headphone output port?
Yogi CYBERPAINT yes
Is it me or does that background music sound like foo fighters
It sounds like their song Everlong
Do I need a audio interface ( sound card ) in order to improve the sound quality for recording or iRig HD 2 and AmpliTube are enough ??
iRig HD 2 is an audio interface so you should be good with it and AmpliTube. If you want to go premium on Mac/PC, you can look at AXE I/O which is a high-end audio interface with great guitar tone-shaping abilities and AmpliTube integration: www.ikmultimedia.com/axeio/
Does it work with the Tonebridge guitar App? If so, are there any latency/feedback issues?
camille wray i personally use it with tonebridge and i dont think ive ever experienced any better setup than it, i havent experienced any issued whatsoever with it, so yah get tonebridge+irig = :)
Shadow Archer I purchased it in the end and love it and Tonebridge too. Thanks for the advice! 🤟
Will an older Mac computer or iPad work such as one made in 2008?
You can find the specs and devices support at the link in the description www.ikmultimedia.com/products/irighd2
Can I connect this device into my PC to use any Effects / AMP simulations and send this signal into my physical AMP?
Yes, but probably it will be good to disable the cab in amp simulation software.
Can you use a mic and guitar simultaneously through both the 1/4 inch?
No, the iRig HD 2 is a single input device. The second 1/4" port is a dedicated amplifier output. For a multi-channel mobile interface, see the iRig Pro Duo. Read more here. www.ikmultimedia.com/products/irigproduo
What happened to lightning cable connectivity?
iRig HD 2 still can connect to your iOS device via Lightning.
Will this work with an Android phone?
Does this product work at app of positive grid inc such as BIAS for iPhone and JamUp ?
Yes. Note, though, that you get to unlock the gear from the $20 version of AmpliTube for iOS and get AmpliTube 4 for Mac/PC free. AmpliTube has been the leading guitar amp/gear software for quite a long time, and you get it free to also use with iRig HD 2! www.ikmultimedia.com/irighd2
ikmultimedia
Really!?That sounds great!
I rush to reserve it on internet.
Thank you.
山城壮 You are very welcome.
Hi ! Do you need extra gear to plug it to a console ? Thanks
While a D.I box can be useful depending on the Mixer. The iRig HD 2 will send an unbalanced signal out of the AMP OUT port, this can go straight to a mixer Hi-Z input without any extra gear.
@@ikmultimedia what type of DI box would you recommend to get a stereo sound from the console please ?
is it possible to plug an iRig HD 2 into a windows PC? if so what outputs would i use to plug in for recording?
Either the headphones plug, or the amp out. The signal that comes through is the same, just on a different sized jack.
Can I download Boss pedals to use on this device? If so, how?
You can use many effects, some based on those pedals, in AmpliTube or other apps with iRig HD 2 which will function as your audio interface.
Does it also work with the software Rig 5?
iRig HD 2 works with any audio program compatible with digital audio interfaces. AmpliTube 4 is a great example of a compatible program. This software is actually included with registration. Read full details here: www.ikmultimedia.com/irighd2/
I would like to know to what class of amps and speakers can be plugged in, is there a restriction? Watts/Ohms?
The amp out is meant to output to an amplifier and not directly to a speaker cabinet. You can send the headphone output to powered speakers.
Hi again :D
So if I use the output with an amp, I will only be able to use the device as a stompbox (pedals) right? Because the sound will be the sound of my amp and not amplitube's amp, I suppose...
I know this comment was two weeks ago and may already have been answered, but from what I can tell you can control whether your Amplitude profiles come through your amp or if it's just a clean signal with the Thru FX switch
Does it come out the MacBook Pro speakers or do I need an Amp?
You do not need an Amp. You can use your computer speakers or plug into any type of external speaker.
@@ikmultimedia is there any latency issue
What are the free gears I get in IPad when I buy Iris HD2?
You can find the details here: www.ikmultimedia.com/products/irighd2/index.php?p=apps
Have you got any device which will provide fandom power to an USB microphone?
We offer the iRig Pre HD, iRig Pre, and a bunch of other great inputs for XLR microphones. www.ikmultimedia.com/irigprehd/ Unfortunately, we do not have anything for USB microphones specifically.
@@ikmultimedia can you not think about this option in your mind and invent an USB port to your I RIG DEVICE? I have SAMSON G TRACK PRO .
The 30 pin cable doesn’t work anymore? My iPad 2
Can i use a amp simulation and plug a real pedal like wha wha on irig hd2 ?
Yes you can. Just note that just like with a real amplifier/gear you will notice that different pedals will give varied results with different gear.
Ok
Does the irig hd2 works on 6s iphone?
can it be connect to the Windows 7 reaper DAW tool so i can record my guitar tones through the Positive grid app on my phone ??
For Windows compatibility you would want to look into our USB audio interfaces like iRig HD 2, iRig Pro Duo, and similar on our web site www.ikmultimedia.com/irighd2
ikmultimedia A simple yes would have also sufficed. Lol
In windows 8, I use the sound card of my laptop as the output line. Can this damage the sound card of my laptop?
Can I use it without headphones, from the iPad speaker?
Денис Полунин yea
Денис Полунин you can
When will you gonna ship in Philippines ...?
You can find out shipping costs and such to your area using our web shop at www.ikmultimedia.com/shop and you can also find your nearest IK dealer at www.ikmultimedia.com/dealers
ikmultimedia Yes. I already visit the ik dealers near ours, but they say they only have hd for now not the 2 version. And its November now. They say late september. 😒😒😒
Mark Bureros I will let our reps know, we would be happy to set dealers up with the proper current stock.
does the irig still works if i plug my bass first into my physical stompbox then i plug it to the irig ?
It will, just note that sonic results will vary depending on the pedal and how it interacts with the gear in AmpliTube, etc.
ikmultimedia just a couple of mini stompboxes, will that work?
I'm sure it would work, it is just to what degree of quality sonically that can only be determined when you try.
ikmultimedia ok :) thank you for the information
umm, one more thing. is it high power consuming when used on ios/android device?
Am I supposed to connect my phone in the headphone jack or the micro usb slot?
iRig HD 2 connects to compatible iOS devices via Lightning and Mac/PC via USB. If you have a device with micro USB that runs Android OS you would want to look at our interfaces for Android www.ikmultimedia.com/android
Yes great sound, but my iPhone 6 battery was empty after 30 minutes. I still need this power bridge !?
iRig HD 2 and AmpliTube will not drain an iOS device in 30 minutes, but to charge your device while using iRig HD 2 yes you can use iRig PowerBridge www.ikmultimedia.com/irigpowerbridge/
Definitely a device issue. Your phone is struggling to run amplitube or whatever app you’re using. Not all apps are created equally. An iPhone 6 may struggle with certain apps when newer phones will never.
Used to sell and repair phones...
Can it be used on ipad 5th generation?
On my modeling amp it’s not working, only have the sounds on headphones....on my amp it’s the clean from the modeling settings! Are there any solutions?
Hi, please make sure you have the FX/THRU switch set to FX and not THRU.
ikmultimedia yes, that was the problem!! I fixed it actually!! Thanks!
Just ordered one!! Can I use this on Facebook livestream??? Please tell me you can ?? Thank you
Yes, I dj with one.
Beau Jenks hey I am wondering on the output to the phone. Since it uses a lighting cable to the charging port of the phone, does it by any chance recharge the phone or would I have to cut short the show when my phone battery goes low? I am debating if to buy Irig 2 HD, irig 2 or the Irig 2 Streamer
DJ RHINO what are you gonna be playing?
Noah Langrehr live DJ sessions
can i use irig 2. to my application amplitube ua? pls. reply
No, AmpliTube UA requires iRig UA.
ikmultimedia what application can i use for my htc phone? irig 2 can i use for my htc?
Do you still need an app if you'll use it with just a headphone?
Yes, an app like AmpliTube for iOS is required for the iRig HD 2 to operate properly. On Mac/PC some kind of DAW or audio software will also be required.
@@ikmultimedia thanks a lot for the info! Oh, what app will i use if i'm using android?
Do we also get the packs like mesa and orange on ios?
Those are not included in the main version of AmpliTube that is unlocked. They are available for purchase separately.
Ah i see. I wish they were included. Even without them its a very sweet deal. I was thinking about buying an another brand but hd2 settled it.
yigit arisoy Glad you like the deal, thanks for checking out iRig HD 2!
Does this work on devices without the lightning port, like iphone4s?
Hi, it does not - there is no 30-pin connector available for those devices.
The device uses micro USB right? So would a microUSB to 30pin adapter work, or is the device not compatible with the 4s.
I have checked with support and it appears that our micro-usb to 30-pin cable will work. You can find it at www.ikmultimedia.com/spareparts
kewlcweed Note, though, that while this will technically work it isn't a supported setup per the device specs.
Can you hook this up to electronic drum sets?
The iRig HD 2 features a mono input designed for guitar or instrument input. While an electric drumset can physically be hooked up and will work okay, the best solution for a stereo sound would be iRig Pro Duo I/O or iRig Stream. Read more at the following links. www.ikmultimedia.com/irigproduoio www.ikmultimedia.com/irigstream
Awesome
My IRIG HD2 doesnt work, it works when i connect it to the Laptop it shows the bright blue light that turns green when i play the guitar, but on Iphone both iphone 5 and 14 pro max it doesn't work. It simply glows blue dimly and never detects the guitar input. It will transfer the sound to the amp but the Phone can't find any guitar input.
Hi @zepyh3401, I'm sorry to hear you are having trouble. Our IK Support team can assist you via www.ikmultimedia.com/contact-support - simply search the FAQ there and if you don't find the answer there will be a button to open a ticket directly to our helpful techs! Thank you.
@@ikmultimedia i’ve gotten a message saying someone created a ticket or something but they haven’t gotten back in 1-2 days now, i really was enjoying the product but it only lasted 1 day.
Can it be used with 9.7 inch iPad Pro?
BeanieBoy that's how I use it 👍👍
Nolan Drake cool
And with an Apple iPad - 9.7" / 32GB????
BeanieBoy yes
Absolutely
such greetings from Guatemala .. could you help me?
because when I connect my guitar to my irig 2 does not sound in real time?
what am I doing wrong?
the app I use is called AndRig for android.
Thank you...
When using iRig 2 or similar interface on a device that does not support Samsung Pro Audio, you will likely experience latency due to the Android OS audio latency issues. For low/no-latency on Android devices that do not support Samsung Pro Audio, you would want to look at iRig UA + AmpliTube UA: www.irigua.com
I’m a little late and I’m hoping anyone could get back to me with an answer but I’ve had this irig for quite some time now and it works great but there’s one big issue, the usb to lightning cable comepletely stopped working after only 2 months of having it. Does anyone know if I can buy and use an average lightning to micro usb as a replacement rather than purchasing the ik multimedia cable for a whopping 30$ just to probably have it fail on me within a couple of weeks once more. From the research I’ve done I am far from the only one experiencing this issue so if anybody who’s tried could confirm for me I’d rlly appreciate that🙏
How much is this going for?
How do I use my legs if I am playing live on the IRig . My hands would be on the guitar. I mean change settings make a loop .
Hi, you can use iRig BlueBoard www.ikmultimedia.com/products/irigblueboard/
@@ikmultimedia thanks!
@@SuperKillbill66 I have a BlueBoard, and it's work. There is a 4 assignations max for foot switches, and 2 expression pedals connectors. You can choose what you want assign for each of these four switches. Thought that it was not enough, but, finally, found out that it's way enough for my needs.
whats the difference with irigh2? can i still use that one with a mac?
If you mean iRig 2, you can use that with many Mac computers, yes. However that is an analog interface that plugs into the headphone combination input/output jack and will not provide as pristine and high-quality sound as iRig HD 2.
so basically the only thing different about them is the sound quality?
Interfaces that plug directly into the digital port of a device or the USB port on your computer will sound better than analog devices that plug into the headphone jack. You can compare the details of our interfaces, as there are other differences, at www.ikmultimedia.com/products/irighd2/index.php?pp=irig-hd2-range
thanks
is this the latest version? will it work with an Iphone 4s?
This is the latest version of iRig HD yes. The list of compatible devices can be found at www.ikmultimedia.com/products/irighd2/index.php?pp=irig-hd2-specs
I really enjoyed singing from Ez Voice because I love singing.
And I will continue to be a female singer because I love singing.
The Audio In is mono or stereo?
It is made for guitar/bass primarily so the input is a single mono input. You can output stereo of course via headphones.
Anyone know how to remove the snap-on clip on the back?
Do that have irig hd 2 for microphone to android?
We do have microphones and interfaces for Android. Please visit www.ikmultimedia.com/android
Can someone give me a rundown on what you get on AmpliTube ?
The gear within each version of AmpliTube is outlined on that version's web page. You can find a link to each member of the AmpliTube family here: www.amplitube.com
ikmultimedia I have purchased irig hd 2 since October 7 through MallForAfrica. since the then it has not reach MallForAfrica warehouse to reach me in Nigeria.
I am from Bangladesh how to get this device
Look for local dealers here. www.ikmultimedia.com/dealers/
You haven't said anything about the USB connection??
We mention Mac/PC compatibility throughout. Please see www.ikmultimedia.com/irighd2 for more information
¿Es compatible con el Samsung galaxy j7?
Good
How do you use this Irig as an external sound card in Windows? When I play audio such as UA-cam, it still plays through the laptops speakers.
Check out our FAQ for the iRig HD 2. This includes some great steps on setting up and optimizing Windows/PC set ups. www.ikmultimedia.com/faq/index.php?category=13&topic=irig-hd-2
Can I connect a midi keyboard to iPhone?
Yes, but not with the iRig HD 2. Check out the iRig MIDI 2 here: www.ikmultimedia.com/irigmidi2
can I use irig 2 with imac (2014 model there is only headphone input, there is no mic. input. )
Hi, this page will explain how to check your Mac's compatibility with iRig 2: www.ikmultimedia.com/products/irig2/index.php?pp=irig2-specs Thank you.
AmpliTube comes along or sell separately?
You will receive AmpliTube 4 in your IK User Area when you register iRig HD 2 and the models from the full version are unlocked in AmpliTube Free upon registering iRig HD 2 in the app.
sell at r$?
thallys geovane iRig HD 2 is priced at $/€99.99
thank you
thallys geovane You're welcome.
how much price boss
When does it comes out?
Shipping late September
does it come with the cables?
Christine it comes with the cord to connect to your device and that it
Can I use it on 4 can cable method with my amp?
iRig HD 2 would work fine with FX loop on an amp.
Can you use the iPhone/iPad to use as the actual amp then use the iRig and do DI into the main PA/ sound system or mixing desk?
Yes, there is an amp simulator (you can choose from many) and a speaker simulator (like for the amps, you have some choice).
Hey guys, does anyone know how to convert the Mono AMP output at the top into a pair of stereo speakers? I want to listen to what im mixing while I DJ But its only coming out of 1 speaker. Im not using a mixer. Your help would be amazing thank you!
Y-cable.
How to connect it to Whatsup or Messanger life conversation ?
Can it be used on windows?
Yes, iRig HD 2 can be used on Windows. Please see the Specs page at www.ikmultimedia.com/products/irighd2/index.php?p=specs for more informaton
Yes it can
Hi ... what's the difference with iRig HD? In addition to its output for amplifier.
Hi, you can find a "What's New" section (including an image with indications of what's new) at www.ikmultimedia.com/products/irighd2/