How to Tune Hondata S300 Part 2 - S300 Install, First Start Prep
Вставка
- Опубліковано 5 вер 2024
- How to Tune Hondata S300 Part 2 - S300 Install, First Start Prep
www.hondata.co...
installing the s300 in the car, wiring up the wide-band o2, checking over the engine and setting parameters in smanager
Disclaimer
"Due to factors beyond the control of The Brown Garage, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. The Brown Garage assumes no liability for any property or personal damage that may arise from doing a modification or repair on your vehicle after watching any of my videos. Due to factors beyond the control of The Brown Garage, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again, any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not The Brown Garage."
please make a part three...literally the best in depth guide ive found...
Yo bro it’s been a whole year where part 3
The greyed out Save setting is not an error. You just saved through the saved as setting. As soon as you make any modification from the save I til save, you will be able to select it not grayed out. It's only grayed because it knows there's no change. Pretty standard in any windows application.
Forreal, don't give up. This content is amazin
more to come, just fixed my pc
This was a great video, thanks for the information, I arrived late. Keep up the good work.
I'm having issues with rough idle (running rich) after a new S300 install and couldn't figure out why, and looking at your video you explained the injector voltage and how it can make your idle rich... i will totally try lowering the voltage. thanks.
i hope it helped, some injectors even w the specified voltage dead times from the manufacture will still give rich idle no matter how low you adjust the fuel map, just have to dial the deadtimes in for your setup
good God I need part three so bad
in the works, my laptop got stolen over a year ago but i just got a new one
WE WANT PART 3
where's part 3 man? this is really good info!
thanks man, workin on it
@@TheBrownGarage sooooo, is part 3 ever dropping?
@@TheBrownGarage still working on it... 😩😩😩
I have some obd1 rc 550 injectors on my Honda Prelude 2000 do I need a resistor box I'm running a p28 ECU with hondata 300
Well I must say, you are the ok boy one that has explained this shit for hondata. Like I didnt even know about setting the TPS like that.
Thanks for sharing all this info, since it seams like hondata has a secret and no one will share..... any way it's been 2 months so drop that 3rd video lol
thanks man np, im workin on it, my editing rig died back in june and i just fixed it
@@TheBrownGarage that sucks, but atleast you can do the rest of it now, I been waiting for the rest to come out. I'm subbed so I'm ready haha
Is that a Marshall fuel pressure guage? If so thats whats up!
Man, can't believe you left the 3rd video out
my laptop got stolen shortly after but i just got a new one on black friday, i fully plan on finishing this series
@@TheBrownGarage fuckin sweet!
If you haven't heard of it, you should look into switching to Honda Tuning Suite.
@@seraphim3TN i have not ill look into it
Great videos. Can you make more?great information. Please can you make more videos
Please do a part 3.
Is there a part 3?
Any updates on part 3
my laptop got stolen but i just got a new one, p3 in the works
The best Hondata Tutorial i have found yet. Cant wait for the next one. sub'd
thanks man, that means a lot
Keep up the content looking forward to the next video.
thanks man, comin soon
I have an Hondata S200 Tune in binary code. Does anyone know where the
fuel map starts in the binary I am trying to transfer S200 tune to S300.
Will i need a adjustable fuel pressure regulator and wideband with a stock h23a blue top motor with bolt ons?
hurrry part 3 lol
its in the works lol
@@TheBrownGarage 18 months later..... nothing 😂😂😂
I just subscribe to see the part 3 hahah
p3 in the works, my laptop got stolen and i just got a new one
begging for part three fr
Good work man, look forward to the next one. I am hoping you got some good knowledge on how to street tune the ignition maps
thanks man, ya i have a safeish process for it, since i dont use a knock sensor for ign tuning, im relying on some math for my ignition advance limits
@@TheBrownGarage looking to tune my built bottom end LS on boost and need help understanding ign timing, is there any way u can make a video on how u do yours so I can try doing mine, also I’m on E85 lol , love the videos part 1 an 2 keep it up. Sorry just found ur channel today lol
I'm having an issue on hot starting my car. When I shut off my car after its been running and go to restart it the idle goes up and down until the wide band heats up, it normally takes about 25 seconds for the innovate wide band to heat up. Any ideas what is causing this? No problems on cold starts. I am Obd1 using hondata.
ive nvr dealt with an innovative wide-band, but if i had to guess ide say its either a lazy IAC, or the closed loop is kinda freakin out getting the false afr readings until the wideband warms up, if it goes away and idles fine after 30 secs from restart i wouldn't worry, would also explain why it doesnt do it on cold start since closed loop has a minimum coolant temp before it switches from open loop
I replaced the IAC with a new oem one already. I think it does have something to do with closed loop, I have to fix it because its drives me nuts. Thanks
ah so that rules out iac, a quick test to confirm if its the closed loop, in the hondata settings set to always open loop(closed loop disabled) and see what it does on warm restart
Good idea, I will give it a try, I am just learning from your videos how to navigate hondata.
Loving these videos really helping!!
thanks im glad to hear that, part 3 is in the works
Awesome video lots of great info. Keep up the good work
thanks man, more to come
Are you going to do a how to on tuning fuel and ignition tables on part 3? I need some help with those thanks!
ya i will, ive been slacking on makin vids
Part 3
Sooo... it's been like 3 months. I guess no part 3? Been waiting! lol
just fixed my editing pc, ill have something soon
weird question. I see you have a top mounted Turbo, what manifold and turbo is that? also from the head where the manifold connects to the furthest part of the turbo to the front, what is the distance? I have a b16 mounted midship and I want to turbo it but there is a firewall, so I wanted to know if I could put one in. yours looks like what I would be doing
its a rev9 b series top mount t3 w 44mm v band, dna motoring t04e turbo. its about 9 inches
Great video!
thanks, still a lot more to come
When will you download Part 3 ?
Is disabling the eld an alternative to clipping it's circuit?
if you clip it or run o2 signal to it and dont disable in the ecu, it will detect false eld and amp up the alternator i think
What happened to P3!!??
my laptop got stolen shortly after, just grabbed a new one on black friday, its comin
Where’s part 3 dude?! Thanks for the info!
its in the works lol, comin soon, np glad to help
S300 v3 first install with key on check engine light stays on why won’t it turn on and no live data
when you first install you need internet access to register it w hondata, if you cant talk to the thing it could be faulty. one of ours went bad and thats what it did, constant cel and we couldnt talk to it w the laptop
Thankkkk you
np, part 3 is probably a few weeks away
Dude... PLEASE SHOW US MORE STEP BY STEP... PLEASE MAN
what specifically?
I need part 3 😩
on the way lol
Part 3 ?
soon
Good man cant wait
Help
I changed some simple ass shit and now it floods every time on start up. Plug stock ecu in and starts right up after burbling the puddles of fuel out... idk what the fuck I did.
oof, hard to say man w/o me being in person w the car. restart with a stock basemap and go form there. what are you trying to do dial in big cc injectors?
@@TheBrownGarage Nah car was already dyno tuned then downloaded from ecu and I guess it corrupted from smanager being a different version than tuner used. So it was flooding from that. I put the stock map on and slowly tuning it myself.
ya DL the tunes can corrupt them even when all the software versions are correct. if its all motor you should be basically good to go off the base map
@@TheBrownGarage it's boosted I got the tune from my tuner but for some reason fuel is completely off. Something mechanical changed so I'll do the fuel tables myself, that's the easy part.
@@FroztiProductions ya if the timing was already tuned just dial the afrs in and make sure to double check the dizzy timing with a timing light
Off
did i really just waste time watching hours of videos to find out theres no part 3
I have an Hondata S200 Tune in binary code. Does anyone know where the
fuel map starts in the binary I am trying to transfer S200 tune to S300.
your best bet would be to check the actual hondata forums on their website
Is there a part #3 ?
there will be in the next few months