The mobile Clack Shack- My portable laser setup
Вставка
- Опубліковано 16 чер 2023
- I have been asked for a walk through of my event setup and here it is.
See ya at The Jam... / peachjamjubilee
For templates that I have made, check out my Etsy shop. I build files for projects and tools for laser engravers.
www.etsy.com/shop/TheClackShack
For Clack Shack shirts, check out my store:
the-clack-shack.creator-sprin...
The links below are affiliate links that will direct you to the product in this video. If you use this link for a purchase, I will receive a commission from the purchase. I remain unbiased and honest in my assessment as always.
Big O's trailers- / bigostrailers
The Clack Shack on Amazon= www.amazon.com/shop/theclacks...
generator- amzn.to/3JlpmEW
comgrow smoke eater- amzn.to/42MmTdL
smoke filters- amzn.to/447eBy0
fisheye camera- amzn.to/3NA4s7y
battery backup- amzn.to/43Ma98j
XTool D1 pro 20 watt- amzn.to/3Jfdx31
My XTool affiliate link:
www.xtool.com/?ref=TheClackSh... - Навчання та стиль
![Lp. Последняя Реальность #97 ЧЁРНАЯ МАТЕРИЯ [Анти Скинт] • Майнкрафт](http://i.ytimg.com/vi/k4MjXCzKsYw/mqdefault.jpg)
I had a truck like that creep up on me in a parking lot once. Some short goofy southern guy hopped out and tried to lure me away with candy.
Your terrible....lol
😂😂😂
😂😂
Please share your source of that laser safety glass.
@@darrellreed7044 Jtech Photonics has the laser rated safety glass. jtechphotonics.com/?product=445nm-laser-shielding-24-x-12
Just found your channel because of 'A Day In The Life' youtube channel. I'm so glad he mentioned your channel cuz YOU ROCK! I'm a newbie to Diode Laser stuff and learning all I can about my XTool D1 Pro... Your videos are awesome (and inspiring)! Thank you.
Thanks.. Glad you like it.
Love your vids. This mobile set up has given me inspiration and goals.
Thanks, brother.
Awesome! Thank you!
It's so nice how your willing to show all you tricks and not keep anything like a "professional secret" .. I see I'm am very far from being able to pull that off but at least I know what I miss now
Thanks, I am all about working with others. I try to innovate to make sure I have something to offer.
Great video! Informative and still entertaining. I watch many of your videos.
I appreciate that!
That's awesome! Thank you for sharing.
Thanks for watching!
Very informative! Thanks for showing!
Glad it was helpful!
Super cool setup.
Thanks!
Really nice job. Nice progress 👏
Thanks
Thanks for the tour...you've given me some ideas! I've been taking my laser to craft shows for a little over a year now and would LOVE to have a setup like yours. Good luck this weekend! Look forward to hearing a recap of how you do -- be sure to take lots of pictures!
Gonna try. Thanks
Thanks for the tour David! Answers a lot of my questions. No one doing this in my area either. The wheels are turning in my head.
It works for me… thanks
Great video!!! I'm just starting my business with a D1 and a custom 10 watt I built. I appreciate your time, effort and detail in this video!!!
Thanks, good luck
Enjoyed this. Been thinking of doing something similar. Love the setup
Awesome! Thank you!
Have you thought of engraving out of the trailer? Maybe adding a small A/C unit or fan to keep things cool-ish. I've done a few flea markets and have seen several vendors do this.
Most of the events I go to it would be tough. I kinda like the open air setup for what I do
Love your setup, wish I had it. Have a big event the end of July in West Virginia that I’ll be taking my laser and setting up. Sadly it will have to set on a folding table if it’s sturdy enough to do so. Thanks for showing us yours!!
Whatever works, less overhead equals more profit. Thanks..
very nice setup, wish you luck this weekend. cheers
Thanks, you too!
I enjoyed this thanks!
Glad you enjoyed it!
Pasty white is the new black, I'm rock'n that look right now...(sing-it)...this pasty leg of mine, I'm gonna let it shine, this pasty arm of mine, I'm gonna let it shine...NOW EVERYBODY...
lol.
Wow! Awesome!🤑🥰
Glad you liked it!!
I think you're having too much fun at this :-) I would like to see some video footage of you working the booth at PeachJam and a re-cap of how you did.
Maybe at this event, I can. I was a little too close to the band last few events. I don't need any copyright strikes.
I feel your pains. My tan stops where my short sleeves end and my hubby and I war about Ford vs. Chevy…sigh😉
It’s the small things… lol
Love the videos, you have been an inspiration for me to start this laser engraving business.I have owned a xtool d1 for about a year now and ,just ordered an xtool F1 laser and signed up for a couple of events already today. I was hoping you would have some good advice on where to purchase blanks such as keychains, dog tags, tumblers, coasters anything that I can make on the fly at these events that may sell well. Thanks in advance and keep up the great work!!!!
There are lots of wholesale places out there but Amazon is usually my go to. Most of the wholesale places require more bulk orders than I care to do.
I love the aerial view and I was wondering. When did you get your Part 107 or did someone else do the video for you?
I have had it for years. I did aerial photography as a side hustle for a while. According to the registry, it was 2017. I also still do aerial stuff for my friends with Channels.
Very nice build! The optical shielding you provided a link for is OD 3, is that dense enough for people to safely watch the engraver at your booth?
The light that is hitting the window is indirect and unfocused. The material is rated for diode machines and has been tested. I run the same windows in my shop for over a year and no issues. I have also found that you can cut it with a diode so that means it is absorbing the light. The reason I purchase from JTech is that they test it and know way more about it than I do.
Very informative, thanks for sharing. One question I have is how many pieces of a certain type of small item do you typically take to a show? Seems a balance between so few you sell out quickly and overloading with way too much is needed. I know the answer will vary for everyone but a point of departure number would be helpful
I keep blanks with me, I can restock certain designs as needed. Small things I keep about 10 of each on hand made. I sell more made at site things.
I use a Beelink mini computer and a small monitor. Saves space and good for running laser/lightburn. Small Monitor not great for designing but functional. A 15" monitor is fine.
I already had this laptop.. $$ saved
i love the beelinks.
I thought you were holding two flashlight when you went outside, then I realized it was the reflection of your pale arms/shoulders blinding the camera😂😂😂😂
Everybody got jokes.. lol. I have been working on my tan...
Now thats service right there i asked last nightvand he put it out today lol
Thanks for the insight, its a lil different than i expected but and awesome set up.
Curious as to your thoughts of working in the trlr with displays and products out side
I just use it for transporting. I don't wanna modify the trailer because I use it to carry lumber and tools when doing work sometimes.
Working in the trailer is probably easier on you and the setup, however, part of the allure is people seeing the laser work (safely that is) and if you're in the trailer you'll need someone watching the booth to not lose sales. Half of the event is you selling yourself as the maker. If they can't see you or talk to you, they'll move on.
@@Vintauri that makes sense didnt think about it like that....now ya done gone and got me thinking again....lol thanks steve
@@Northalabamabbqbulletsbigrigs Happy to help! 😆
@@Vintauri I agree, Sometimes people buy just to watch me make it.
That’s alright about the Ford thing… One day you’ll smart up and get a Tundra.
Forgot about the TUNDRA guys... lol.. Maybe
I've been thinking about trying to take a laser to events but power is the issue. Most of the outdoor events we do are set up in a way that wouldn't allow a gas generator. Have you ever tried a battery power ststion like an Eco Flow or Jackery? I wonder how long it would last before it went dead. I can't imagine the diode laser uses much energy.
I haven’t tried that
What are you using for a smoke eater? The shows by us prefer limited fumes.
I am using the comgrow version, it helps but is not a cure.
If you get one, order some spare filters also. amzn.to/3NV6XAz
If you are outside, how about a solar panel for charging and basic power?
The output of most compact solar panels scare me. Also, the price..
I’m jealous! I’d love to be doing shows, but most have been killed by covid!😢
We ran COVID out of town here.. Life has returned.
What are the dimensions of the enclosure?
Which one?
Have you looked into buying a galvo head laser yet?
I may have one on the way... 20 watt fiber..
@@TheClackShack Nice! I’m seriously eyeballing a CO2 galvo laser. I’d love to add a fiber also. Can’t wait to see your videos on it. Any idea when you’ll receive it?
@@quintonhett5289 , I haven't got shipping confirmation yet. Sounds like it won't be long.
😂but where do you have to go to the markets? A piece of advice, your videos are too long and watching them all makes you tired. you talk too much
I talk just enough for me.. You must just lack stamina. Have a great day