First Coat Flats and Butt Joints
Вставка
- Опубліковано 28 лют 2016
- Simple guide by a Pro - Learn how to First Coat Flats and Butt Joints with our simple guide!
As professional tapers, we apply a thin coat of compound with the taping process, saving the contractor time, material and unnecessary sanding. Best results are achieved with three coats of compound. As a cost savings measure two coats maybe preferred in areas such as the garage and occasionally the basement, based on the limitations of the project.
Filmed by - threestepsdrywall.com
Servicing Ottawa with High-Quality Drywall, Taping, Sanding, Crown Moulding, European Plastering Services.
We have added a few more videos check them out !
HOW TO: Drywall First Coat Butt Joint Like A Pro
:
ua-cam.com/video/47D0ZEB7Fqc/v-deo.html
HOW TO: Drywall First Coat Flats Like A Pro
:
ua-cam.com/video/o9wKxpDWdZA/v-deo.html
HOW TO: Drywall First Coat on A Double Flat Like a Pro:
ua-cam.com/video/g17s9ddncnY/v-deo.html
HOW TO: Drywall First Coat a Not Even Flat just like a Butt Joint Like A Pro
:ua-cam.com/video/PnvARpqcX3g/v-deo.html
Further videos will be added daily subscribe, like and share to those who need this skill set. Thanks!
One of few guys on UA-cam who knows how to finish drywall!
Wow, best demonstration on tapping I've ever seen. Great job.
Joe Bower Taping*
You guys are craftsmen! I'm a DIY'er and struggle so much with mudding.
Great video for people that may not have finishing boxes and basic hand tools 👍good job
simple, to the point and explained in detail, well done
Pros always make it look easy!! Thanks for the tips
I just used this method, wow I have been doing it the hard way. Thanks Jeff.
Good Job, Jeff.
I will apply these techniques tonight! Great video
Great video. Really good instructions.
you made this look so easy that I'm nearly inspired to get back to work. Nice work!
Great teaching! Not sure why but mudding has been something that is taking me a while to get used to.. This video helped a lot! Thank you!
makes it look so easy
true profession right there. no messing!
simple clean method. thank you .
Good Job Jeff..
nice video. I forgot I had one of those square mud holder things thanks for reminding me
awesome! just perfect
you make it look so simple man.
Thanks
I suck at drywall I end up putting on to much mud and have shit ton of sanding. nice job.
You are saving my life at my new job man you're a real pal
:)
Nice
Good video
Thank you!
Thank You.
you make it look too easy, good job
nice work never used trout with Hawk
Very nice.
Awesome
i just started doing drywall and i seem to be able to use the trowel better than the knifes
Smooth.....👍
great video. do you also use mud boxes?
Hello. Is there a difference in the way you hold the trowel when applying the coat and wheb cutting? I am referring to angle of the trowel, pressure of the hand and alignment of the blade over the material , i.e is there a side which is more pressed than the other.
Thanks
if im gonna use a curved tool to put the mud on, do i need to apply pressure on outside edge?
Freaking artist!
Nice job but I like durabond to set my tape
What brand of mud are you using?
Are you using a flat trowel or curved trowel?
I have to do it with a 10 and a 12 I struggle so much 🤭🤭😭😭😭
should I sand between first and second mud application ?
no need to :) I would suggest watching ua-cam.com/video/Uvv94VixQNs/v-deo.html for advance tapers
so after this is sanded, you should be good to prime & paint?
U need one more coat polish coat
two more coats and your good to go to sand.
So sand after each coat?
Not required, depends on skill level.
Just not understanding the ripping the paper off part, never seen it done and know mud doesn't bond well to the brown.
I would suggest watching ua-cam.com/video/Uvv94VixQNs/v-deo.html for advance tapers
B
Is that a bubble I see at the 2:00 minute mark?
Not sure, even if it is its a common thing to fix in our trade. Besides the tape has only been applied and is coated on. Normally we let it dry first before coating however since this DYI was made for homeowners. Our advance techniques: ua-cam.com/video/3OvmAbmNIiU/v-deo.html
It looks so weird to use those spackles
TAPE IS NOT DRY YET
It is probably quick set mud in which it sets up to where you can go over the joints for another coat , it will basically not smear. You cannot sand it while it is like that but you can go over it.
dude why are you going so wide, the tape is 2" wide. you're 2 ft wide. tf?
Jessica Blackburn
Yeah, but he’s floating out the factory panel joints that naturally have a recessed bevel way too wide. The two panels meet they make a 5” recess. In short, he is floating factory joints like if they were butt joints. Hence, creating more sanding, more work, and more dust.
wow so you haven't used the box tools or the bazooka make jobs easy lol you are using a trowel when they have 10 12 inch spatulas you sir work harder not smarter
He probably has, the video is intended to show home owners who won't have those type of tools to get the job done.