Great video lots of good information about a problem my Jimny G engine has,though only ever happens during warm weather after about 20 miles or so,living in Scotland it doesn’t happen that often ,usually leave to cool down for half an hour then starts no problem however with the weather being that bit warmer of late it’s happening more often ,so I’ll start my investigation later today. Thanks very much Martin
Always good to watch your videos, even for my G13BB engine. And thx for the help with my Sj t-Case convertion install ! it crawls like a ...well.. a very very slow jimny on 33's :-)
Hi Martin, Thank you for the video... it was very helpful. I'd like to replace the cam sensor on my 2007 Jimny JLX. Could you say which sensor is required? If I contact you would you be able to supply that part to me? Many thanks for your help. Bill
Hey thanks fir the video, what would be symptoms for this to fail? Mine jimny 2002 1.3 petrol , chokeing sometimes when check engine comes up, plugged to obd and error P0340 came up, any idea what ir could be ?
My Jimny's rpm gauge wont go up when i start it but when i drive it goes up but isnt synced with the sound of the engine for example i know the rpm is well over 2,000 rpm but rpm gauge only reads 1,000 rpm
I have a Suzuki 1998 truck ombre it runs for 20 min and shuts off, or won't crank back up, it acts like the starter, but it's not I come back few hours later and it's good to go : / changed plugs, discaps wires, fuel filter, seems hit at ac fuse box area : / idk
Hi, I have the same fault. Is there a particular sensor that I need , my cam sensor is on the front of the engine. It's an 06 plate 1.3 JLX plus ?Thank you.
Hi, Your vehicle requires a 33220-50M30 Sensor. I don’t have any in stock at the moment. It could take a week to 10 days at the moment if you wanted one.
Great video lots of good information about a problem my Jimny G engine has,though only ever happens during warm weather after about 20 miles or so,living in Scotland it doesn’t happen that often ,usually leave to cool down for half an hour then starts no problem however with the weather being that bit warmer of late it’s happening more often ,so I’ll start my investigation later today.
Thanks very much Martin
Always good to watch your videos, even for my G13BB engine. And thx for the help with my Sj t-Case convertion install ! it crawls like a ...well.. a very very slow jimny on 33's :-)
Hi Martin,
Thank you for the video... it was very helpful.
I'd like to replace the cam sensor on my 2007 Jimny JLX.
Could you say which sensor is required?
If I contact you would you be able to supply that part to me?
Many thanks for your help.
Bill
Nice video Martin, thanks for sharing. Cheers
Does M13 engines have two cam sensors??
Hey thanks fir the video, what would be symptoms for this to fail? Mine jimny 2002 1.3 petrol , chokeing sometimes when check engine comes up, plugged to obd and error P0340 came up, any idea what ir could be ?
It could be the cam sensor although a can sensor failure often does not give any code at all
Can the camshaft sensor or crank shaft sensor broke even if there is no check engine light code?
The sensors often do not show a fault when they are not working properly
My Jimny's rpm gauge wont go up when i start it but when i drive it goes up but isnt synced with the sound of the engine for example i know the rpm is well over 2,000 rpm but rpm gauge only reads 1,000 rpm
I have a Suzuki 1998 truck ombre it runs for 20 min and shuts off, or won't crank back up, it acts like the starter, but it's not I come back few hours later and it's good to go : / changed plugs, discaps wires, fuel filter, seems hit at ac fuse box area : / idk
Hi, I have the same fault. Is there a particular sensor that I need , my cam sensor is on the front of the engine. It's an 06 plate 1.3 JLX plus ?Thank you.
Hi,
Your vehicle requires a 33220-50M30 Sensor.
I don’t have any in stock at the moment. It could take a week to 10 days at the moment if you wanted one.
@@bigjimny thanks for that. I'll try and get one at my local store.
Hello pls help me i have a problem in my jimny
Is it same sensor for the m16 a found in liana ?
Sorry, no idea. Suzuki even fit different sensors to the same car depending on the year so you need the exact details to select a sensor
My jimny m13. Will not go over 50 mph.help
Hi Dennis how have you resolved this. Mine just came in and has that problem
@@philsiphok6986 yes mate runs amazing
P0