How to Black Out Emblems on RAM 1500
Вставка
- Опубліковано 8 бер 2022
- How to Black Out Emblems on RAM 1500 RAM Truck chrome to Black Emblems & Badges using plastidip we blacked out the chrome on the ram head of the front and back of this pickup truck and removed the ram 1500 from both doors and the chrome 5.7L HEMI and replaced it with black 5.7L HEMI emblems
Click HERE for the 5.7L HEMI Emblems in black
amzn.to/3CBRYVZ
Click HERE for RAM 1500 in black
amzn.to/3hW6jmI
Click HERE for black Plasti dip
amzn.to/3pPrkUA
Click HERE for the whizzy wheel
amzn.to/3MFBBMT
Click HERE for the DE-SOLV-IT
amzn.to/3MBHvP0
Click HERE for the GRILLE removal video
• HOW TO - Remove the Gr...
*Checkout other cool products Boosted Motorsports has tested and recommends HERE* 👇
www.amazon.com/shop/boostedmo...
Support BoostedMotorsports by JOINING Today! / @boostedmotorsports
Disclaimer:
Due to factors beyond the control of BoostedMotorsports, I cannot guarantee against improper use or unauthorized modifications of this information. BoostedMotorsports assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. BoostedMotorsports recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of BoostedMotorsports, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BoostedMotorsports.
As an Amazon Associate I earn from qualifying purchases. Products in the provided Amazon links are my recommendations based on honest use and experience with them.
#Ramtrucks #ram1500 #ram2500 #ram3500 #ram - Авто та транспорт
Click HERE for the 5.7L HEMI Emblems in black
amzn.to/3CBRYVZ
Click HERE for RAM 1500 in black
amzn.to/3hW6jmI
Click HERE for black Plasti dip
amzn.to/3pPrkUA
Click HERE for the whizzy wheel
amzn.to/3MFBBMT
Click HERE for the DE-SOLV-IT
amzn.to/3MBHvP0
Click HERE for the GRILLE removal video
ua-cam.com/video/Kebd888gFXg/v-deo.html
Click HERE for the RTV silicone removal from the door
ua-cam.com/video/6Sv7kRltyBE/v-deo.html
Paint match oem headligths
@@MAMAR-ov8in That would be badass too!
Truck looks way better de-badged. I took everything off except for the RAM heads. So much easier to clean and wax the truck too.
How did you debadge it I can’t get the gunk off?
RIDE ON, the fishing line trick is what we do on our motorcycles for emblems and goofy reflectors. Works like a champ 🏆
Can’t wait to see this build start!
Awesome job! looked for the actual position of the hemi emblem everywhere until I found your video, thanks a lot!
Love the black out look. My warlock is all blacked out. I tinted my tail lights with vivid light smoke ultimate gloss tint and worked out really well along w third brake light and mirror turn markers. Good stuff to work with.
🔥🔥🔥 I thought I was alone! I made sure that Hemi emblem was in a factory look location on my 300.
another good video. super excited for this build.
That is sick man the black looks way better then the grandpa chrome lol.
MrPlastiDip🤳《☆》Nice work Bro👍✔Funny little ankle biter won't bark when on camera🖖🤓🏈
THANK YOU I LEARNED ALOT..thumbs up CHEERS
Congratulations on the 100K subscribers. 😎👍
Badges look good, thanks for the measurements on the HEMI badge. I actually needed that for my Ram 1500 that I've had these black badges in a box in forever... now I can put them on haha
No problem man! I know it makes a big difference having them in the correct spot!
Wow what a great improvement with out those badges an jus the black smoke out hemi badge an ram emblems!👍Too funny about the sisters ferocious vicious dangerous looking little princess doggie lmao 🤣!! 👍 great video john !🏆💯👌
Heat gun works great for badging and decals also rubbing alcohol loosens up most adhesives and permatex
I personally would have left all the badging off of it I think it looks cleaner. I had my old two and a half quad cab repainted and I left all the badging off of it looks much cleaner in my opinion.
I really like the black out look now.. was a chrome fan but you changed my mind ....lol dangerous dog with a bow on her head ...lmao
Looking great John!!!
Loving the Linglongs. Might get me a set of those bad boys 🤣
I used a heat gun and a plastic pry tool. That double sided tape on the back of the ram 1500 badging was a nightmare to get off. Ended up just using heat and a plastic scraper.
Awesome 😎
You should do a series of aftermarket parts that increase mpg. One part at a time and see if they help at all with this truck.
Awesome thank you 👍👍💯🙌🙌🇺🇸🇺🇸👌👌
Save the fingers and nails lol definitely can relate to that with how many debadgings I've done. Looking good
Well you called it with the letters and numbers being in the wrong spot!!! To bad you couldn’t see the ship job they did on it thats going to be some video I’m sure!!!! Awesome 🤩 job as usual and I’ll see you in the next video to see all the awesome parts you’ve gotten!!!!! Just wondering if your going to be visiting Clay this weekend he’ll be at the gator nationals!!??? That would truly be awesome 🤩!!!!
big difference. i got the blacked out badging option on my 2020 at was an additional 700 bucks.
I'd love to see your experience with tinting the tail lights. I did them on my old 2013 Laramie with VHT spray on tint. It came out, ok, I guess. From 5 feet it looked good, but up close it was kind of blotchy.
Heat gun will work 100xs better and easier to remove emblems
It would be cool if you could install keyless Go ignition.
Put led tail lights on, but first tint @ edge of lenses
Looks great, thanks for all u do. I've been a longtime follower. Have a question, would u do a video on changing the e fan temp for the retro fit to the 5.7? I have changed a few things with the OBDLink MX+ per ur vidoes and all has worked well. I'm not sure I can with this scanner and u may tell me to purchase the HP tunner and proceed with this tool. What would u reccomend? Thanks again
Your going to make me buy things... I've been looking for some anodized or powder coated lugs. Can you help with finding some? Anodized would be sweet! I haven't found any black ones. Powder coated or anodized..
That’s dope…will this work on the chrome bumpers?
Hey I know this guy!!!
Put some of those 5th gen taillights in the rear
How does the finish handle car washes? Thanks for a great video. Much appreciated 🤙
It’s been on my ecodiesel for over 30k miles and looks perfect
The best thing I've ever used for any type of paint tape or tar or anything sticky for that matter is good old original WD-40 spray . it works amazing and instead of using a lot of elbow grease just let it sit overnight using a paper towel to stick it to the side of the vehicle kinda like a STICKY BOMB. If you've seen the movie "SAVING PRIVATE RYAN" not to be confused with "SAVING RYANS PRIVATES" you'll know exactly what I'm trying to say. It's perfectly paint safe and in fact, it was thought that it was originally made of mainly diesel fuel because of its slick and dissolving properties but that wasn't too far from the truth Mainly comprised of a base soil and petroleum distillates. So it's perfectly fine and paint safe. he remove is pretty well everything that's stick to a vehicle if it sit overnight for hard to remove emblem foam, double sided tape. It will leave your paint looking shinier than ever until wiped clean with warm DAWN soap and water. Due to its WD WATER DISPLACING Properties any moisture that's inside the tape will simply be Removed and taken up by the spray. You can also use a magic eraser standard strength to remove any surface film left over from the tape.
I am concerned their is a reason those badges on. The drivers side were install funny was that side hit at one time why else would the badges be that way ?
Ya know Jon, your job to remove those plastic emblems could be much easier if you use some adhesive removal. It doesn't damage your paint, just maybe the wax coating. You can find it at your local automotive paint shop or auto parts house.
Would that work on the chrome part of a bumper?
I wanna see tail light tint so I can do to my blue 1500
I know it's low hanging fruit but....what are you plans for the mast antennae?
Man what a huge difference john I love it with just the hemi badges cant wait for the wheels 😀 👌🏼 #BSTEDMTRSPRTS #100kyoutubeplaybutton
You need to get a 5th gen keep the content fresh 👍
Where in Florida are you?? I moved down here a few years ago and I’ve been loving it
I have a '14 Ram rcsb Hemi, 6spd, 3:55 gears, 2wd, orig owner with 40k's for sale.
Where are the links for the other videos you mentioned
I still have to edit and post the emblem fiasco video!
Plastic trim removal tools would be a little safer to use on those stubborn to remove emblems without risking as much damage.
Just need a 2.4 drop ...to look good..
Paint match headligth
I want that mirror replaced it making me nuts
Me too lol
Oh no so how long until someone told you nothing has to be replaced or removed with plasti dip? It doesn't stick to areas that have clearcoat. You can tape and spray all emblems right on the truck. Luckily I learned that from a Ram community prior to doing mine. It took me about an hour to get all my emblems blacked out.
Once its cured, can you run it through the car wash?
Yes
You should have taken a heat gun to heat up the glue
I think factory fender flares would look good on it.
Just take them off
I know you are all into the blacked out look, but come on! Black badges on a blue truck looks dumb. If anything you should have changed the chrome to brushed nickel or an aluminium.
Fool you don't know shit if you think black badges look bad. That shit looks crispy.
@@randyvillegas9413 I love how you resort to insults, Apparently, I must explain my comment to you. My point was how many times has he plasti-dipped emblems and logos in his videos??? I can recall at least 4 videos where he's done it. It's BEEN done, and DONE AGAIN and AGAIN... I understand that he doesn't have the ability to work on his vehicles , but rehashing the same old thing does NOTHING to increase viewer ship. Without that this channel doesn't continue to grow.
Make sense now? BTW using lame urban slang to describe how it looks in YOUR OPINION does nothing to help make your point. I might not use the best grammar, sentence structure or choice of words. However, even when I chose to offer my opinion on how I feel it looks ON THAT truck. I also offered up something that might be of help to improve his content until he gets a shop and can finish the other projects he has that I am eagerly awaiting. Try being helpful instead of hateful, it might make your day better.
Will someone please explain to me the obsession with blacking out everything on a vehicle? Honestly it is a real question........I don't understand why everything needs to be blacked out......ya can't define the wheel from the tire looks like it's on hockey pucks....and if you choose to explain it.... don't be a smart ass or an asshole about it I am not a millennial or a Gen Y or Z
Folks like the "murdered out" look. That's what they call it. Lol. I have black wheels and black overlays on my emblems and badges that let some chrome peak thru, but that's it. It's like the way folks liked to Chrome out their vehicles or Harleys. Black is the new chrome! 😀
I am in total agreement with you on that one Ronald ! I guess we come from a different era where the old hot-rodders motto was Keep It Simple Stupid. I like a clean and simply modded vehicle.
@@jeffwilliams840 I guess you're right Jeff only thing is that they are all looking the same black wheels,badges,running boards/steps,tail lamps spend a couple grand on wheels and tires and you have to be 5 feet away to see the design of the wheel....the bronze wheels are ok Polished aluminum are nice the black chrome are nice with certain colors.i guess it's what ya like right....I am just old school I like shinier shit.... black out and low just not my bag of tricks....... doesn't mean I don't appreciate the effort ppl put into making it their own but they all look the same... thanks for the explanation 👍. wasn't trying to be a dick... just get a better understanding of it.👍✌️