Bulletpoint Mounting F150 Install
Вставка
- Опубліковано 31 бер 2022
- This is an unboxing and installation of Bulletpoint Mounting Solutions Metal Series 2015 Ford F150 mount with Spring Loaded phone holder and Action Camera mount.
Product Link - www.bulletpointmountingsoluti...
Product Links - #Commissionsearned
Bulletpoint Mounting Solutions Dash Mount - amzn.to/3wWhL9K
Dewalt 20v Max Cordless Drill Combo Kit - amzn.to/3CwHwPy
Husky Sure Grip Utility Knife - amzn.to/3iQC3dl
Dash Panel Trim Retainer - amzn.to/3XDeZkQ
Bulletpoint phone holder & Extension Arm - amzn.to/3HXoGFz
Adhesive Solid Neoprene Rubber Strip 1/16” T x 1/2" W x 10' L - amzn.to/3VSRVOe
Craftsman Nano MM 24-piece Socket Set - amzn.to/3Hux2og
Husky Sure Grip Utility Knife - amzn.to/3iQC3dl
Haloview BT7 1080p - amzn.to/3bup2pk
Haloview Suction Cup Mount - amzn.to/3PF5H3o
Tools & Hardware
1. Bulletpoint Mount
2. Safety Glasses
3. Drill
4. Utility Knife
5. Straight Edge to cut with
6. Cutting Surface
7. Pencil with eraser
8. Driver with 7mm Bit
Please subscribe to my channel for more content!
Follow our full time Overland Journey on UA-cam @larisonlifestyle
Follow us on Instagram - @ozarkfloating
Be sure to check out our website - www.ozarkfloating.com
If you have a product you would like for me to test and review, please reach out.
Ozarkfloating@gmail.com - Авто та транспорт
A couple tips, as I installed this unit in my truck. I left the tray pad in. There's no reason to take it out, as I still use the tray. I did not use the 3M tape, just left it and bolted the unit in. It is rock solid and doesn't need the tape. The tray liner prevents any rattle that could have occurred. Mark and drill the tray with the pad in. Then, pull the pad and ream the holes in the tray a little, as they are overly tight. Put the pad on the mounting plate with the four bolts and then put the plate and pad on the tray and bolt it up. Use a piece of mask on the dash to protect the trim if prying when removing the tray for installation. Lifting the back of the tray slightly and then lifting the front of the tray with my other had was the ticket for getting the clips loose. Great mount and the video was helpful. I also got an iPad mount for the passenger to watch videos.
@lostgriz, thank you for the greatly detailed tips on your install I think this will help answer a lot of questions for future Bulletpoint owners.
I went with putting it on top of my pad as well. After drilling the holes for the mount, I put the pad back in the tray. Turn the tray upside down but put scrap 2x4 under the hole. This keeps the pad in place while drilling through the holes already cut in the tray. If you don't support the pad, it just flexes up. Once the holes are made through the pad, turn it right side up, then drill through the pad again to get more of the rubber reamed out.
Note: On the F-150, remove the tray by removing the 2 rear bolts. Then it simply slide back and off. No prying needed.
Thank you for such a straight-forward installation guide. Much appreciated!
@alphaditto, no problem I'm glad I could help out.
Excellent install video! I like the fact that you’re very careful with the install as I would be. Going to be ordering one of these mounts today. Thanks again!
@T C W, thank you for the kind words!
You made this so simple for me. Just finished drilling and mounting. It's getting dark so I'll be fumbling around with that speaker wire and last few bolts haha. I didn't read the instructions so I'm glad you mentioned wait 24 hours to mount the phone/tablet. My 8 year old is really excited to try it out on her tablet.
My only complaint during install was they sent the exact same size drill bits and the 7 mm did not fit the bolts under the speaker cover. No worries, I just ran to the toolbox and found a bigger drill bit lol. Thanks again man.
@TheMeanmarine13, thanks for the comment I'm glad I could help. Enjoy the mount!
Was able to complete mine in 20-30 minutes because of this video. Thank you!
@calebgillan9920, that's awesome! Enjoy your mount they're great
Exactly what I was looking for ---- great video! Thank you :)
@K C, happy to help!
Thanks for the video. I just installed this in my F250.
@shawn4101, I'm glad I could help. I just uploaded my 8 month review video along with a fix if your dash ever starts to develop rattle or vibration, check it out. ua-cam.com/video/kUErEeQiAbg/v-deo.html
Waiting on mine to come in. I will definitely be referring back to this video when I get ready to do the install. I ordered the RubiGrid model and am considering cutting the front face out so I can still store items underneath the mount in the tray if I want to.
@derek1258, I'm glad I could help out. Let me know what you think of the RubiGrid model.
Great video man!! - Using my personal tools it only took me about 30-40 minutes. The manufacturer supplied tools but I set them aside. Thanks again
@TheDustyGolfer, thank you! I'm glad my video helped you out with a smooth quick install.
Thanks for this video, just installed my set up fast and easy thanks to your step by step video
Your welcome! I'm glad my video was clear and helpful.
Thanks!!! I'm about to head to my truck and do mine now.
@foley3769, thanks for watching!
Just installed my Bulletpoint. The connector to the speaker doesn't just "come apart. There is a small detente (dunno what it really is) but I pushed it down with a small flat tip screwdriver and it came apart. Of course I spent about 25 min. attempting to get it apart. Other than that the install was easy. Thanks Jacob for the great video on this.
Those little connectors are finicky sometimes. Thank you for the comment, I'm glad my video helped out!
Very informative and helpful! Great video! Thank you!!!
Thank you for the feedback, I'm glad I could help out!
Thank You!
Nice, thanks for the demo .... I just ordered the kit with a phone and tablet mount as was curious about the mounting. Looks like a straight forward install. I'll be cutting my mat as well as my dash cover. Not sure why they have you wait 24-hrs to use it considering the 4 bolts secure the mount so well, but ... Thanks again.
@edbrumbaugh9202, I'm glad my video helped out. I think the wait time is to allow the 3M tape to set up and prevent vibration. I also added a rubber strip along the front edge under the clips to prevent vibration off road and on rough roads. I show it in my second video here...
ua-cam.com/video/8mBYGO7QN6E/v-deo.html
Great video!
@Kristen French, thank you!
Great video, thanks
Thank your for your comment Chris!
I have this system installed on my F-150 and it is rock solid and a great mount.I did install it with the rubber mat in place, didn't cut it as you did, just marked and drilled through it and it works just fine.My only complaint is the rubber grip pads on the phone holder both loosened and fell off not long after installation.They're just glued on and the hot temps just loosen the glue.This is not a big deal if you use a case on your phone.Job well done on the video...
@PhantomPhixer1, thanks for the great feedback. I know the rubber grips are listed under the warranty exclusions but have you tried reaching out to customer service? If this happened after only a few months in I'm sure they would take care of you.
Just installed on in our Jeep and have the F150 to do. I was wondering if the bolts were long enough to use with the rubber mat. Thanks for answering that. Not sure the need to let 3M tape dry when mount is bolted with nylock nuts.
@@USNMMCret I personally haven't tried mounting it over the rubber mat without the 3M tape, but have had feedback from others that it can be mounted this way.
@@jacobsupgrades I’ll give it a shot with mat. Great video though. Bulletpoint instructions for Jeep said to check UA-cam for dash removal. F150 instructions didn’t and I was more concerned about that lol. Glad I found yours.
Thanks
@andyramz1705, your welcome!
Great Video. Exactly what I was looking for to buy and mount the Bullet Point setup in 2018 F150.
Question: I have a Samsung Ultra 22 so it's a heavier phone, do you think the phone will slide out of the holder? I don't like that the holder they provide does not have a bottom cradle.
@Cameron Little, Thank you for the comment! The spring loaded phone clamp is very solid along with rubber on the sides I don't think your phone will fall out of it. I have taken the truck on many backroads and heavily wash boarded roads, its never fallen out. I have an iPhone 13 Pro with the largest storage drive available so it's got some weight. Make sure you match your phone size to the standard or XL clamp.
Quadlock.
Thank you for your video good sir. Do you think lock nuts and maybe rubber bussing would work without cutting the mat? Wanted your opinion before the install of my own if you would be so kind.
@mark filmore, I think that would be a good method for mounting the bracket. It may stand up above the dash slightly depending on the bushing thickness and not be flush. The provided screw length may be your only problem, I would double check. I also wouldn't use the 3M tape incase it doesn't work for you then you could still mount it to the tray with the mat trimmed if needed.
Not sure why you would want these phone mounts if you had Apple Car Play??? Seams like the phone / cables would be in the way of the screen. Solid install video - thank you.
@LeeH-Ranger83, they do more than just phone mounts. I mount my Haloview backup camera monitor for my travel trailer offset to passenger side. You could mount a Go Pro, tablet and radio mic too. Cable management can be a problem, I've thought about installing some plug in ports in the back side of the storage tray to clean it up.
Does anyone know what those white clips are called and where to get some, or am I the only one who lost some when I popped that mounting area?
@johnjohn, I found the dash panel trim retainers on amazon - amzn.to/3XDeZkQ
Thank you, I'll look them up.
What model GoPro camera did you use and mounts for the bulletpoint
That is my GoPro Hero 05 amzn.to/3wcbIP1 it also works with my
GoPro Hero 10 amzn.to/3SL7pCw
The mount is Bulletpoint Mounting Solutions GoPro Mount www.bulletpointmountingsolutions.com/collections/device-holders/products/gopro-mount-for-20mm-mounting-ball
@@jacobsupgrades Thanks Jacob! I appreciate the fast response. Great video. I ordered my Bulletpoint mount because of it.
Great video. How does the phone do in direct sunlight? Does it overheat?
@itbepopples, usually I have the AC running if it's a hot day and so far it hasn't overheated. Bulletpoint specifically points out to not leave your phone in the holder if it's a hot day and your vehicle is off because it can damage the grips on the clamp but I'm sure it would overheat the phone too.
@@jacobsupgrades thanks for the timely response. I had a holder in my previous vehicle and AC on while on trips the phone would still overheat in the sun so I am cautious about it. Can't wait to try it
How well does the phone clip hold the phone while off-roading?
@Sean M, the clip holds the phone very well, we have not had it fall out once even down heavy washboard roads. My wife is much happier with not having our suction cup RAM mount falling off onto her. I will say I have noticed if it's not holding the phone we sometimes get vibration noises from the mount but that's it.
@@jacobsupgrades ..awesome!! Thanks for the video and quick response. Much appreciated!👍🏻🇺🇸
You mentioned making a follow up video to report how it's worked out - is that coming soon?
@James Petroski, thank you for the reminder I plan to have a follow up video within the next few months. Do you want me to cover anything in particular on it?
@@jacobsupgrades Great question. I'd recommend letting us know if the plastic tray you drilled through looks good, or if you see any signs of cracking; how well the ball/socket mounts hold up and if they need frequent tightening; or any other small annoying things with the mounts.
@jamespetroski1147, here is my follow up review video. ua-cam.com/video/kUErEeQiAbg/v-deo.html
I don't see why you need the adhesive since it's screwed down. Couldn't you just drill holes thru the mat (vice cutting it) and base and install it on top of the mat?
Yes definitely. I could have gone over the mat but I wanted the adhesive to have a better bond to the tray. After a couple thousand miles, I removed the tray and had to tighten the nuts because they became loose over time.
I just got mine in today and installed the two phone holders and put my phones on them. It’s definitely heavy on the phone side. Do you think adding structural braces (sheet metal or plexiglass) under the tray would help strengthen the tray, or is it not needed.
@@colinhunt8539 did you add additional support? I’d be interested to know if it helped with your setup!
I have a 2018 raptor, what size arm did you get? I dont want one to short...
@kacekace3676, my mount came with the 7cm arm. I think it's the perfect length for how I place my phone. I also use another 7cm arm to mount my Haloview rear trailer camera monitor and it's the ideal length for that too with both mounted up.
Thanks. I may get the 7 and the 10
Just the question I was gonna ask. Thanks.
Why donyou need to wait for the adhesive to setup when you used mounting screws and nuts?
@Jeffrey Glass, great question. First off Bulletpoint recommends this in their instructions. I believe it's to allow the adhesive to set up so you don't get any vibration noises with the mount contacting the plastic tray during offroad or rough road travel. Personally I can't stand vibration / rattling noises while on the road.
@@jacobsupgrades I agree with Jeffrey and Michael. I don't understand the reason for adhering the mount with double stick tape to the tray since it's screwed down and held with nylon locknuts. It isn't going anywhere. I can see using maybe single sided rubber insulating tape for vibration. But, even then I think you might have more stress noises from the 3 tray plastic clips. Nothing against you Jacob, you've done a great job on this video. I'm just trying to make sense of Bulletpoint's use of double sided tape.
@@MPD-ih6sm yea you bring up a great point. After a couple thousand miles I did have to remove the tray and tighten down the nuts due to them becoming loose.
@@jacobsupgrades The nylon lock nuts that hold the mount to the tray needed tightening?
@@MPD-ih6sm that is correct. After a while they loosened up, could be due to washboard roads, off-roading, or lots of highway driving.
Love the video ! Why not go over the rubber mat
@thefartdart, glad you like it. I wanted to make sure the double stick tape on the base of the mount adhered solidly to the plastic tray. I think the ridges on the rubber mat would be difficult to mount it to if it's not sitting flat.
@@jacobsupgrades I just mounted mine the way you did it.
Why wait to use it? It's bolted.
@dougchauncey2077, Bulletpoints instructions recommend to wait to allow the 3M double stick tape to set up properly and prevent rattle in the tray. Seems counter intuitive with the nylon lock nuts but with the washboard roads we drive down I wasn't going to chance it.
I with the arm was longer.
Bulletpoint offers different length and colored arms
i'll just put it in my pocket...
It's a solid mount that hasn't let me down. Here's my 8 month review video ua-cam.com/video/kUErEeQiAbg/v-deo.htmlsi=2HHnhaWi-fZ-eCns
Hey UA-camrs my 8 month review video is now posted to my channel. ua-cam.com/video/kUErEeQiAbg/v-deo.html
God this video was painfully slow. Watching you struggle with basic hand tools is terrifying. Good lord
@neilmurphy4301, thanks for the feedback I'll speed it up.
You took entirely too long to relay basic information. You cannot be successful YouTubing like this.
I appreciate your feedback. I’ll keep this in mind for all my future videos. Thank you!
What mount do you use with the GoPro?
I use this Bulletpoint dash camera mount.
www.amazon.com/dp/B08295RLCJ/ref=cm_sw_r_as_gl_api_gl_i_GDA12BMTDF19XARNCYQK?linkCode=ml2&tag=ozarkfloati00-20