After watching this video, I purchased both the Builtright Industries dash mount and the 67 Designs Carbon Fiber phone holder for my 2016 F150. OUTSTANDING products and the fit and finish is flawless! Keep up the good work and thanks!
Finally more truck mods! The new phone is great, I am thinking about using it for a blog soon as the new cameras are insane. Thanks for watching y’all!
I enjoyed watching your videos and also purchased several upgrades for my 2017 F250. I really like this phone mount. However, I also have installed a Vantrue N5 4 Channel WiFi 360° All Sides Dash Cam. My phone mount gets in the way of the cab video. Do you have any other recommendations for a phone mount? Thanks in advance. Keep up the good work!!!
I have a BuiltRite Shelf and they are awesome. You should install some power ports up there in the shelf, then you wont have cord dangling all over the place.
Are you aware of any videos or instructions on how to add power ports up there? That's actually what I am here searching for. Where would you tap into to get the power? Thanks for any help you can provide.
@@smar7056 No, I have not seen any videos on this. I tapped in to the 12VDC Power Port on the Dash since it was managed by the BCM to auto turn-off power based on vehicle settings and it is in close proximity. If you have an F-250 w/upfitter switches you could use one of the switches to control power.
either hold the piece yo uare drilling over the edge of the gate, or use a block of wood, because when you penetrated the plastic, your bit hit the gate.
Really cool products shown. Super beefy n sturdy so much so that the very same plastic tray Ford has to offer now needs tobe upgraded to a polished billet steel tray so when you wiggle your phone mount the tray will not want to fall off.😎👍🏻 Great vid.
I like most of your mods that have to your truck! However the i phone mount. I don't think it looks good and you lose must have storage space. I'd like to see the mount located in a better place. Another product I'd like to see is some floor storage under the floor mats! And a storage idea for dead spaces in the side of the super duty 8 ft. bed my truck has a lot of wasted space .
I enjoy your videos. I do have a question regarding the phone mount. How is it holding up? Are you still happy with it? Keep making videos I really enjoy them
I don't know about anybody else, but as far as a drill template is concerned, they have all torn on me. I've learned to tape them down with scotch tape and then use a drill bit with my hand to mark the item to drill through the paper.
I find this pointless if you have the navigation screen option. Apple car play does everything you need. If you have a android or something else might be helpful.
It’s all preference really. I average between 65-80 calls a day, a number of text messages and emails along with making about 30 stops to different job sites and my office. This proves to be a way better choice for me than apple car play. While Apple car play can be nice it is not my preferred interface on the truck’s screen. Oh I also forgot to mention that I have two cell phones and those stats are only for one...
Understood. On my ‘19 F350 Lariat Sport apple car play works good for me and I do a lot of calling throughout day aswell. Guess it’s all personal preference
moostang09 Oh it’s called 67 Design where you ordered it from out of Dallas ??? Thnk you so much for your rapid response Enjoy your videos just purchased a 2019 F350 and your videos are a lot of help ....
moostang09 no Thnk you can’t wait to what else you got for the Super Duty and by the way would it be to much to ask for the contact info on 67 Design in Dallas can’t seem to find it in Google ....
I'm trying to figure out do I really need 1... I hold my phone in my hand all the time anyway... This way I won't have to stretch my arm all the way out... 😉
Kelton Boyd same here brother i refuse to drill anything or mess with anything only thing I did was put some nicer tires and wheels on my 19 F-450 limited
Or you could buy a scosche magna Mount. I used one for a couple years and my phone never fell off when hitting bumps or railroad crossings. No drilling required and the 3M tape holds very well.
After watching this video, I purchased both the Builtright Industries dash mount and the 67 Designs Carbon Fiber phone holder for my 2016 F150. OUTSTANDING products and the fit and finish is flawless! Keep up the good work and thanks!
This channel is costing me a fortune!! :D
Finally more truck mods! The new phone is great, I am thinking about using it for a blog soon as the new cameras are insane. Thanks for watching y’all!
Mounted mine in a 2016 F450 to my rear view mirror with a small clamp and 4 items from ram-mounts. Solid no drilling and perfect for my view.
I have a 2019 F250. Been scared to drill ANYWHERE into it. So, after watching your video I gave it a shot. So easy! Thanks for sharing.
I enjoyed watching your videos and also purchased several upgrades for my 2017 F250. I really like this phone mount. However, I also have installed a Vantrue N5 4 Channel WiFi 360° All Sides Dash Cam. My phone mount gets in the way of the cab video. Do you have any other recommendations for a phone mount? Thanks in advance. Keep up the good work!!!
I just did the same thing to my Nissan Frontier, makes a world of difference but it was hard to find anyone who makes a mount for it.
I have a BuiltRite Shelf and they are awesome. You should install some power ports up there in the shelf, then you wont have cord dangling all over the place.
That’s a great idea. I would like to find a way to make the 67 design mount wireless charging. It would be a challenge but would but super convenient.
Are you aware of any videos or instructions on how to add power ports up there? That's actually what I am here searching for. Where would you tap into to get the power? Thanks for any help you can provide.
@@smar7056 No, I have not seen any videos on this. I tapped in to the 12VDC Power Port on the Dash since it was managed by the BCM to auto turn-off power based on vehicle settings and it is in close proximity. If you have an F-250 w/upfitter switches you could use one of the switches to control power.
This is genius. If you could somehow reroute the center console USB’s up there so you have CarPlay that would be the bomb
either hold the piece yo uare drilling over the edge of the gate, or use a block of wood, because when you penetrated the plastic, your bit hit the gate.
Great for the DIYer👍.. made my betterbuilt and 67° install go super smooth. Thank you for making these vids
Got the 67 phone holder today, what an awesome product!
It sure is Troy! Happy to hear you are enjoying it. Make sure to subscribe so you can catch more ideas for parts like that! 🤘🏼
Already subscribe, and watch all your Super Duty videos!
Just ordered both for the Raptor! Whoooot! Also grabbed the seat release!
Great video! I some how managed to get to 1:30 and gave up since I was looking for a phone mount.
I have been wanting a better mounting option for a while and this looks to an excellent option. Appreciate the links. My setup is ordered!
Really cool products shown. Super beefy n sturdy so much so that the very same plastic tray Ford has to offer now needs tobe upgraded to a polished billet steel tray so when you wiggle your phone mount the tray will not want to fall off.😎👍🏻 Great vid.
Hey man. Hoping to get some advice regarding parts/upgrades for my F250. Can you offer any please?
I like most of your mods that have to your truck! However the i phone mount. I don't think it looks good and you lose must have storage space. I'd like to see the mount located in a better place. Another product I'd like to see is some floor storage under the floor mats! And a storage idea for dead spaces in the side of the super duty 8 ft. bed my truck has a lot of wasted space .
Looks awesome! Love how solid it is.
It’s been great! No complaints so far.
What ball is that does it come with the 67 designs setup
Well you talked me into it. Just ordered the whole setup!
My truck came with the rubber mat that goes in that tray compartment. Did yours truck not come with a rubber mat up there?
Does anyone know what those white clips are called and where to get some, I'm probably the only one who lost some when I popped that mounting area?
Question. Could you just mount the ball onto the tray without the metal bracket?
Mine did the same thing. After playing with it I found that you can move it and tighten the knob just above the ball and kept mine from sagging down.
Installed mine today. Will see how it does on lease roads.
Is it worth it?
I enjoy your videos. I do have a question regarding the phone mount. How is it holding up? Are you still happy with it? Keep making videos I really enjoy them
I don't get it. Over $100 to drill into your truck so you can mount your phone when you could just plug it in and use CarPlay?
Will this work if you have a case on your phone? It didn't look like the holder extended too far.
What ball mount is that one, I see they offer 2 different ones?
I have the Built Right bracket, what exactly do I need to order from 67 Designs for my phone mount?
Nice work! Best wishes in 2020!
I don't know about anybody else, but as far as a drill template is concerned, they have all torn on me. I've learned to tape them down with scotch tape and then use a drill bit with my hand to mark the item to drill through the paper.
Wonder if velcro could be used to attach it for easy cleaning underneath bracket
Still waiting for the phone holder to be back in stock!
looks like an M-Lok mounting system
I find this pointless if you have the navigation screen option. Apple car play does everything you need. If you have a android or something else might be helpful.
It’s all preference really. I average between 65-80 calls a day, a number of text messages and emails along with making about 30 stops to different job sites and my office. This proves to be a way better choice for me than apple car play. While Apple car play can be nice it is not my preferred interface on the truck’s screen. Oh I also forgot to mention that I have two cell phones and those stats are only for one...
Understood. On my ‘19 F350 Lariat Sport apple car play works good for me and I do a lot of calling throughout day aswell. Guess it’s all personal preference
Am ready to install my mount - I was wondering if you could install 3 or 4 hub USB port under the mount so you don't see the wires (hide wires)
Super cool install but dayummmm that is a costly phone holder 🤣
Why not just use the Apple Car Play?
Link for the maintenance log book?
What length arm did you use?
i like that stove in the back ground
Haha, thanks man...
That's what I'm saying lol. 4/5 burner gas stove hell yeah
What size arm did you end up using?
Did you find the answer?
Could have just 3M taped the bracket so you didn’t have to damage the truck.
You mentioned you got this from Dallas Texas ? Could you tell me where I’m heading there tomorrow please it be of great help ...
No I ordered it online. 67 Designs is based in Dallas, TX.
moostang09 Oh it’s called 67 Design where you ordered it from out of Dallas ??? Thnk you so much for your rapid response Enjoy your videos just purchased a 2019 F350 and your videos are a lot of help ....
Yes sir. 67 Designs is the company that made the arm and Built Right Industries made the mesh plate I mounted to the dash. Thanks for watching! 👍🏼
moostang09 no Thnk you can’t wait to what else you got for the Super Duty and by the way would it be to much to ask for the contact info on 67 Design in Dallas can’t seem to find it in Google ....
I'm trying to figure out do I really need 1... I hold my phone in my hand all the time anyway... This way I won't have to stretch my arm all the way out... 😉
Will it work in a 2015 F150?
Yes sir! Built Right has a kit on their website. I believe it is the same one but you may check before ordering. 👍🏼
I refuse to drill into my f450 limited.
Kelton Boyd same here brother i refuse to drill anything or mess with anything only thing I did was put some nicer tires and wheels on my 19 F-450 limited
Look at the pro clip then, no drilling
Does it rotate horizontally???
Yes 360°
Would have been a lot easier to mark and drill from the back, also would have put wood or something under it instead of running drill into tailgate
Just bought a 2019 F150 Lariat would love to link with you and talk mods I should get! I live in Dallas as well.
Nice video
When all else fails, read the instructions.
Nice nice
Great video but come on. $79 for the mount and $45 for the metal bracket???? I can buy an Android radio for Pete's sake.
But who wants an android radio....
Or you could buy a scosche magna Mount. I used one for a couple years and my phone never fell off when hitting bumps or railroad crossings. No drilling required and the 3M tape holds very well.
Get a ProClip, half the cost and no dash disassembly required.
$125 for a phone mount?
Millenials
I had one ...jUnK
What made it junk? Just curious as mine has held up so far.
5 ads. Sheesh
Still cost you no money to watch. 🤷🏼♂️
@@moostang09 If you think time is free.
You’ve got plenty of it if you have time to complain about ads on a free video..
Their customer service is awful