How to Turn Over an Engine by Hand | Bar Over an Engine
Вставка
- Опубліковано 12 кві 2024
- This is a full tutorial on how to perform an engine rotational test! It is super easy and essential on telling the health of your engine's rotating assembly.
Locate the front of the engine, down low, there will be a harmonic balancer which will have a serpentine belt attached to it. In the center of the balancer is a large bolt which will very in size depending on the manufacturer, usually between 22mm and 24mm.
You may need to remove the front under shield of the to access the front of the engine.
Attach a socket to the bolt and a short extension which should be 1/2 drive to help handle the force needed.
Connect a breaker bar which is a long bar socket wrench for leverage and turn the engine clockwise only. You don't want to turn the engine backwards because the timing chain tensioner can retract and the engine may jump time.
Continue to rotating the engine for two complete 360 degree rotations to ensure the engine is free and clear, then you are all set and the test is complete.
Breaker Bar: amzn.to/3xyB7VC
Socket Set: amzn.to/3xusviN
Instagram: / 2carpros
If you have a car question ask it completely free at www.2carpros.com/questions/new
#automobile #diy #autorepair
*Disclaimer: Please use all safety precautions - Авто та транспорт
I completed this test on a manual transmission and can't remember if I was in neutral, an I in trouble?
Do u remove the plugs prior to this
If you suspect that you have water sucked in through the intake which ended up in the cylinders. This will help expunge any water. As he said in the video, water will not compress so it can bend a piston rod or blow rings out
So yes
Is it safe to turn the crankshaft on new modern suv? I'm trying to clean the carbon build-up on the valve to open up the valve.
Yep! Thanks for watching!
Did you use to do pc component reviews? I swear I use to watch you back in the day.
Hmmmm could be! Thanks for watching!
Next time i go to pull A parts going to try this.
Great idea! Thanks for watching!