2008 Ford Focus 1.6L Diesel Clutch Replacement

Поділитися
Вставка
  • Опубліковано 24 тра 2019
  • 07376369067
    www.williamsmobileclutch.co.uk
    Support the Channel Donate:
    www.paypal.com/donate?hosted_...
  • Авто та транспорт

КОМЕНТАРІ • 115

  • @szotyi1980
    @szotyi1980 Рік тому +2

    I can not imagine how could you make this video. To put camera always to perfect spot etc. Exceptional indeed.

    • @handle433
      @handle433 8 місяців тому

      Amazing patience I believe! It’s a great video for sure!

  • @Ronan448
    @Ronan448 4 роки тому +2

    Very helpful video, I have a 2012 mazda 3 with the same engine and the flywheel failed. I decided to replace it myself with help from my father even though I haven't done it before and saved myself hundreds in labour, cheers.

  • @anthonybeech676
    @anthonybeech676 4 роки тому +5

    Awesome video, can really appreciate all the hard work that goes into a clutch change, not to mention all the camera work too 👍

    • @WMCS
      @WMCS  4 роки тому +5

      anthony beech thanks a lot for the feedback and for visiting the channel...
      I’d say the camera work takes a bit of time.. but it’s a great way to share for the DIY mechanic ...

  • @YassinYassinAlhamdoulilah
    @YassinYassinAlhamdoulilah 7 днів тому

    ميكانيك معلم خدمة متقونة وحدة وحدة اللهم بارك✅✅

  • @cseles81
    @cseles81 4 роки тому +1

    Excellent! It helped me tremendously lot yesterday in replacing the clutch on a 2010 Focus 1.6 tdci. It is a complete video for the clutch. Though, replacing shaft oil seals makes sense, when you invest so much work. It is also better to completely remove the shafts for safety and more room to work.

    • @WMCS
      @WMCS  4 роки тому

      Gusztáv Oláh glad to hear the video came through. Thanks for the suggestions ...

  • @tiagomagalhaes1009
    @tiagomagalhaes1009 3 роки тому +3

    AMAZING. ITS AN ART. MANY THANKS FOR YOUR VIDEOS. I have to try to change mine on a 407 1.6 HDI. Your videos give us motivation and know how. Jee that engine has so many oil leaks .....Many Thanks Kevin

    • @WMCS
      @WMCS  3 роки тому +1

      Thanks for a great feedback ... Ooo the old 407..😁✨..,, gotta love them.

  • @ardeleanrazvan6270
    @ardeleanrazvan6270 7 місяців тому

    I didn't notice to put the clutch oil back. Beside that, very informative video. It helped me a lot to make an idea about how should I do this job. Thank you. Greetings from Romania.

  • @vasilica200
    @vasilica200 3 роки тому +2

    thank you!
    teacher of car mechanics!
    👍👍👍👍👍

  • @golfhammer7153
    @golfhammer7153 5 років тому +3

    Great vid you make it look so easy, good job 👍

    • @WMCS
      @WMCS  5 років тому +1

      Golfhammer
      Thanks for the feedback

  • @ghiarossa
    @ghiarossa 4 роки тому +1

    I in one day I mounted it twice, I put the clutch backwards ... haha. You are very good

  • @sorineldeaconu388
    @sorineldeaconu388 3 роки тому +1

    Eres muy bueno mecanico, me gusta mucho tus videos y aprendemos mucho de ti. Felicidades

  • @ayhancin9726
    @ayhancin9726 3 роки тому +1

    tesekkur ederim.cok guzel video cekimin.bayildim

  • @MasParaQue
    @MasParaQue 2 роки тому +1

    You make it look easy and fast but it's not easy and fast at all !! 👍👍

  • @bondjamesbond7634
    @bondjamesbond7634 3 роки тому +1

    Great video good to watch a top machine make a really difficult job like this look easy 10/10

    • @WMCS
      @WMCS  3 роки тому

      Thanks for taking time to leave us a reviews. Really appreciate it.

  • @shirazulhoque4305
    @shirazulhoque4305 4 роки тому +1

    Never new clutch change was so complicated. Hard work

    • @WMCS
      @WMCS  4 роки тому

      Shirazul Hoque it can be quite in depth. Hence the price.

  • @bigbill74scots
    @bigbill74scots 4 роки тому +2

    Great job mate, respect.

    • @WMCS
      @WMCS  4 роки тому +1

      Scottish Outdoors thanks for the feedback pal.

  • @Fvck_Y0u_Sad1Q_K
    @Fvck_Y0u_Sad1Q_K 11 місяців тому

    Sometimes it's good to just have a camera videoing a job without commentary. Especially one with camera angles as good as this. Focus 1.6 TDCI clutches take me back to my apprentice days where the first clutch I ever did was on a Ford Fusion 1.4 TDCI that had done 230,000 miles exactly. Me being an apprentice managed to put the clutch in the wrong way round and nearly included a new master cylinder 😬. Since then I've never rushed a job 😂

  • @Ionut.Ivascu
    @Ionut.Ivascu 3 роки тому

    Thank you so much for this video!

  • @constantin6828
    @constantin6828 3 роки тому +2

    great work man ,you are brave

    • @WMCS
      @WMCS  3 роки тому

      I’d personally put it down to years beating on my craft. Day in day out.

  • @gerryduggan6821
    @gerryduggan6821 3 роки тому +1

    Great job Kevin ! Well done buddy 👏👍🙌

    • @WMCS
      @WMCS  3 роки тому

      Hey Gerry
      Thank you.

    • @silverback7279
      @silverback7279 3 роки тому

      @@WMCS How long have you been fitting clutches chap?

  • @fuzzybrain8274
    @fuzzybrain8274 2 роки тому

    Brilliant. Very informative. Thank you for your forethought. May I humbly suggest using a work light as a "fill light" to help with the contrast issues the camera has with the daylight/engine bay?

  • @scrinja
    @scrinja Рік тому

    This one looks a right Bastard of a job to me Kevin ... Well done and great informative Video

  • @loll1974
    @loll1974 4 роки тому +1

    You da man well done

  • @mikeyoneil6389
    @mikeyoneil6389 3 роки тому +1

    Needs an oil leak looked at never mind a clutch ,what a mechanic totally professional doing a job like that and filming it on his own good man well done

    • @WMCS
      @WMCS  3 роки тому

      Thanks Mikey..

  • @Tom-es9qy
    @Tom-es9qy 5 років тому +1

    Excellent videos love your work please keep posting videos and would be grateful if you change a clutch on a rear wheel drive car. Thanks

  • @mikesmithroller
    @mikesmithroller Рік тому

    Great video, thanks

  • @unregrettablelife9424
    @unregrettablelife9424 4 роки тому

    Does this has a concentric slave cylinder? If so how did you bleed it? Before or after you install the gearbox back to the engine?

  • @cdward1984
    @cdward1984 2 роки тому

    Hi Kevin.
    I am so glad I found your videos!
    Is it the same procedure for the 2005 cmax 1.8 TDCi ? If so I hope to refer back to your video while doing the slave cylinder this weekend 🙏
    Much appreciated
    Craig.

  • @martinstroebel7624
    @martinstroebel7624 2 роки тому

    I'm working in my grandad's 2.0 TDCI. I am very glad its not as oily as your tho

  • @miladinseratlic4565
    @miladinseratlic4565 4 роки тому

    this is insane how much work is necessary only for preparation and later putting all together . BTW 19:00 there are easier ways! :D

  • @Hsfgd08
    @Hsfgd08 3 роки тому +1

    Nice 👍😀 I need to know next: how clean is throttle body of this kind of model and has it separate filter-element or particular fuel filter near by somewhere fuel tank at the bottom of the car?

  • @valentinvali3307
    @valentinvali3307 3 роки тому

    hello, what's better? for focus 2 1.6tdci? volant luk si clutch sachs? or sachs steering wheel and sachs clutch?

  • @ianhill20101
    @ianhill20101 2 роки тому

    Can a mk 2.5 110 tdci dualmass be converted to singlemass ?
    Ive got mine on 135 thou and it needs its 4th dual mass my dad dont help

  • @mackiersturbo
    @mackiersturbo 2 роки тому

    I have the 2009 Focus 2.0 tdci cc is this basically same procedure as this 1.6 or is it completely different? Just came across your videos excellent work.

  • @louislouis4417
    @louislouis4417 4 роки тому

    Hi need to do mt partner's 1.6 tdci clutch.... do you have a video of taking the Acutal clutch of ?...this video just showed removing the gearbox or am i missing something?.Thanks

    • @WMCS
      @WMCS  4 роки тому

      John Layda I think if anyone is gonna attempt to do this kind of repair they need to know how to install a clutch already... otherwise I can go very wrong. ..

  • @brendanbradyfan3589
    @brendanbradyfan3589 5 років тому

    Good video

  • @andrewrussell5944
    @andrewrussell5944 4 роки тому +2

    Does anybody know how many hours labour to change a clutch on this model?

  • @jacknapier1776
    @jacknapier1776 2 роки тому

    Hi Kevin. Why Did you removed the right hand axle? It's really needed to perform this job?

  • @galaxyb1103
    @galaxyb1103 3 роки тому +2

    Amazing job, thank you for these informative videos.
    I'm looking to remove the gearbox on a 2011 volvo s40 with the D2 diesel engine.
    Do you know if i need to remove the sub frame or will there be enough room to slide it out?
    It's a 6 speed manual.
    Cheers.

    • @WMCS
      @WMCS  3 роки тому +1

      If it’s an s40 petrol have a look at the Ford Focus video on the channel same engine and set up ...
      S40 diesel have a look at ford transit connect video same set up and engine.

    • @galaxyb1103
      @galaxyb1103 3 роки тому

      I have taken the gearbox out, no need to remove or loosen subframe, plenty of space to remove the gearbox. Thanks!

  • @elzrinja365
    @elzrinja365 Рік тому

    So you need to drain the transmission oil or is it possible other way?

  • @Viljeri
    @Viljeri 4 роки тому +1

    Fucking legend! Good job!

  • @josipmatic4732
    @josipmatic4732 5 років тому

    How much cost cluch parts and how much miles has the car? My car has 203000km on single clutch, soon i must replace it.

  • @osmankonukseven3871
    @osmankonukseven3871 4 роки тому

    Does it play belly flywheel?

  • @frankfisher99
    @frankfisher99 5 років тому +1

    I like the abdominal curl to lift a gearbox into place.....

    • @WMCS
      @WMCS  5 років тому

      Frank Fisher lol. Things we have to do to earn a few pennies heh..

  • @nazari6071
    @nazari6071 3 роки тому +1

    Dankeschön

  • @ThePianoCentre
    @ThePianoCentre 4 роки тому +1

    Hi Kevin , getting addicted to watching your videos 👍, looks like a million miles on the clock with the state of the engine ?

    • @WMCS
      @WMCS  4 роки тому

      david kenyon that one was proper oily and mucky... quite high mileage... Thanks for the feedback

  • @askullinconnemara
    @askullinconnemara 5 років тому

    Hi great video thanks. How long a job from start to finish ,wiĺl probably be doing one shortly with a noisy release bearing.

    • @WMCS
      @WMCS  5 років тому +2

      askullinconnemara
      If you know your stuff pretty well. You’ll be looking at about 5 hours. There is one bolt between the gearbox and the exhaust. That alone will set you back about 40 mins ... happy to help with some advice

    • @askullinconnemara
      @askullinconnemara 5 років тому

      @@WMCS thank you

  • @baautosgarage528
    @baautosgarage528 4 роки тому

    How to bleed the clutch?

  • @cdward1984
    @cdward1984 2 роки тому

    Hello Kevin. I'm stuck on the bastard shaft removal, it doesn't want to release from the housing like yours did in the video. When I move it slightly forward and back it is hitting something ? :/

    • @WMCS
      @WMCS  2 роки тому

      It’s probably net getting past the C clip.
      You have to really hit it out with a chisel and good hammer.

    • @cdward1984
      @cdward1984 2 роки тому

      @@WMCS cheer bud. Waiting for reinforcements with bolster and bigger hammer 😁 🔨

  • @yoyo895
    @yoyo895 4 роки тому

    Great video! Thanks! When you removed the air box at 12:34 , there was a rubber pipe still attached? How did you disconnect it and what is it?

    • @WMCS
      @WMCS  4 роки тому +1

      yoyo895 it’s just a rubber breather pipe. It’s only a fit in a small nozzle in the air box

    • @yoyo895
      @yoyo895 4 роки тому

      @@WMCS thanks for replying!

  • @giovank1
    @giovank1 2 роки тому

    Good my friend

  • @georgegeorgel7254
    @georgegeorgel7254 9 місяців тому

    After all this process did u top up gearbox oil and clutch bleeding?

    • @WMCS
      @WMCS  9 місяців тому

      Oh noo. Thanks for pointing that out. You’re the best. 😉

  • @paulnpijrr
    @paulnpijrr 5 років тому +2

    what jacking point do you use to lift the front axle?

    • @WMCS
      @WMCS  5 років тому

      Paul Negrea just the side seal or mostly centre of sub frame

    • @paulnpijrr
      @paulnpijrr 5 років тому

      @@WMCS is the subframe strong enough to hold the vehicle`s weight? I do not want to bend it..

    • @WMCS
      @WMCS  5 років тому

      Paul Negrea yes it is. But stay close to the reinforcement holes.

  • @philip.aocallaghan4602
    @philip.aocallaghan4602 2 роки тому

    Does any job like this faze you,? Nothing puts you off your stride. Great video

  • @Adam-os6sv
    @Adam-os6sv 4 роки тому +1

    Hi mate I was gonna attempt this myself as I fix my car and most the stuff on my own but this is abit out my league how much do you charge for this mate if you don’t mind me asking

    • @WMCS
      @WMCS  4 роки тому +1

      Adam Sedgley for this particular one. With the DMF and complete clutch kit about £550.

    • @Straightcutspike
      @Straightcutspike 4 роки тому +1

      @@WMCS sorry to jump in on this, wondered if you guys cover mid wales/ herefordshire area, or could recommend someone? pretty sure mine is on the way out!

    • @WMCS
      @WMCS  4 роки тому

      Straightcutspike yes we do. Text me your reg and postcode and I’ll get it organised for you.

  • @peterg3661
    @peterg3661 5 років тому +1

    Least the bolts were easy to undo with the amount of oil that thing was spilling out the engine

    • @WMCS
      @WMCS  5 років тому +1

      Peter Griffiths
      Very true. I was quite pleased 😃 when I saw all the oily muck.

  • @tomvanbos4714
    @tomvanbos4714 Рік тому

    👌💥

  • @danielshearer5016
    @danielshearer5016 8 місяців тому

    hello sir 3 questions for you- 1 is there any problem following you r silent videos- 2 Is even 1 of these videos specific to an sp1-ib5- in america an ty for showing a lot.

    • @WMCS
      @WMCS  8 місяців тому

      .

  • @fordyuk26
    @fordyuk26 3 роки тому

    How much would this cost

  • @Zephieish
    @Zephieish 5 місяців тому

    Do you cover West Midlands?

    • @WMCS
      @WMCS  5 місяців тому

      Yes that’s correct
      www.williamsmobileclutch.co.uk

  • @gilka8411
    @gilka8411 3 роки тому +2

    How much for this work?👍👍👍

  • @zachaphina3140
    @zachaphina3140 3 роки тому +1

    How many speeds is this gearbox?

    • @WMCS
      @WMCS  3 роки тому

      Some 5 some 6.., hard to remember which one this was .., but gearbox all the same.

  • @todoranmarius7197
    @todoranmarius7197 4 роки тому

    I have a c max 2.0 tdci 2011,is the clutch the same as this one ?thanks

    • @WMCS
      @WMCS  4 роки тому

      todoran marius it should be very similar. But sometimes there’s slight discrepancies on the thickness of the pressure plate or the diameter. Best to go by the registration for the parts.
      But the fitting process is very similar

  • @Kaledet
    @Kaledet 3 роки тому +1

    Propper grafter you! What is the weight of the gearbox? 💪 Sexy move putting it back in. :P

    • @WMCS
      @WMCS  3 роки тому +1

      😆😂..,, roughly about 50kg I’d say.

    • @Kaledet
      @Kaledet 3 роки тому

      Is it the samme process on af Volvo v50 1.6D 08? Need to change mine within the next few weeks. 😅 it's slippin. 💸💸

    • @WMCS
      @WMCS  3 роки тому +1

      There’s a specific v50 repair on the channel. Have a look and let me know.

    • @Kaledet
      @Kaledet 3 роки тому

      @@WMCS if you are comming to Denmark, you can do the job. 😜👍

    • @cdward1984
      @cdward1984 2 роки тому

      @@WMCS shit are you serious ? I don't think my chest and ribs could take that. Would this be no different to the 05 cmax 1.8 tdci ? 😬

  • @missionnad1
    @missionnad1 3 роки тому

    Oil leak everywhere 😂😂
    How many mileage have the car ?

  • @SabriCanbaz
    @SabriCanbaz Рік тому

    silent man thanks

  • @cristan9582
    @cristan9582 4 роки тому

    Lot of bolts, nothing referring clutch replacement.

  • @kevingoldbey7401
    @kevingoldbey7401 8 місяців тому

    The clutch on them ford focus are very bad like what is ford at they are getting to be very bad now a days

  • @valentinvali3307
    @valentinvali3307 3 роки тому

    hello, what's better? for focus 2 1.6tdci? volant luk si clutch sachs? or sachs steering wheel and sachs clutch?

    • @WMCS
      @WMCS  3 роки тому +1

      Both are good.

    • @valentinvali3307
      @valentinvali3307 3 роки тому

      @@WMCS thx man!!

    • @valentinvali3307
      @valentinvali3307 3 роки тому

      @@WMCS I saw that the luk clutch disc doesn't have shock absorber springs, only the sachs one has it, that's why I said to take the luk steering wheel and the sachs clutch kit

    • @valentinvali3307
      @valentinvali3307 3 роки тому

      @@WMCS I saw that the luk clutch disc doesn't have shock absorber springs, only the sachs one has it, that's why I said to take the luk steering wheel and the sachs clutch kit

    • @valentinvali3307
      @valentinvali3307 3 роки тому

      @@WMCS I saw that you also use luk and clutch sachs in several videos!