We had a great time over in Canada with the LTT crew. Glad we could make it happen! Want to help make more big videos happen? Check out our all new Tactical Laptop Backpack: mightycarmods.com/products/tactical-laptop-backpack-black-edition
I AM SO GLAD YOU'RE MAKING THIS VIDEO!!! My daily is an '01 civic, IDENTICAL to this one. PLEASE PLEASE PLEASE contact me so I can get parts in order to do a full in-depth build series going!
Huge thanks for coming out! Did some more remote tuning with the Haltech guys and got even more power out of it, runs great now. Thing is proper quick! (for a Civic) -AC
Cross over merch? LTTMCM Chopped PC build? This was a spectacular collab. (bias admission: long time view of both channels. I own LTT merch (scratchy arms inside that epic pocket hoody but otherwise great) , and have MCM signed posters and T arriving in the mail today. Build my own PC's, and mod my cars (gfb ftw).
@@ZacBernasconi Quite a bit needs to happen before I'd call it track ready. Turns out people hate the 7th gen for good reason lol, the steering rack design is idiotic so the bump steer is pretty bad right now. Over the next couple months though hopefully I can read enough 7th gen forum posts to make all of the little changes to make it proper fast in the corners.
You guys should do a video on how the software to tune the car works, didn't really see any of that and it would certainly fall within the realm of LTT. I'm not a car guy but I'd certainly be interested in what the software can do.
Fabricator from LTT here, had an absolute blast with you guys here. Glad you were able to come out 😁. Unfortunately ran out of time to finish the front splitter for it
That means you either didn't have the full three days of time budget, were lacking supplies, or have been overthinking it other than everyone else involved hehe
The accent was really jarring for me, hearing them next to each other. I dont hear it when watching normal LTT videos but next to Marty god damn was it obvious haha.
We put a TV screen in your headrest, we put 2 TV screens in the floor of your boot, we put a TV screen in your rocker cover, now for the craziest part, we turned your back seat into a tropical fish tank!
When you do anything that involves replacing a thermostat or draining all the coolant from a system, it helps to hold the t-stat open on first warmup. I use an Advil (or any other small dissolvable pill) to hold the new t-stat open. It lets coolant flow through the system freely until it disolves, which is usually around the time the fluid is up to temp. I learned this from a Subaru friend while working on my old legacy
I agree with Moog, maintaining engagement through the years in a platform so competitive as this is really an achievement itself. It was great to see David enjoy the karaoke in Japan
As a fan watching Linus go from a house to multiple warehouses and MCM from moms garage to flying across the world to build cars just warms my freaking heart to see my favorite channels collab! Thank you!
B.C. is usually pretty good for rust since they don’t get too much snow. Over here in the Canadian prairies where we get snow dumped on us, and salt our roads a bunch, the cars are practically falling apart after 15-20 years. Btw love the collab with LTT!
Absolute dream colab here! Started watching MCM so long ago and found LTT years later, but both channels give the best content from the other worlds I love. Thanks for this guys!
I ran into Marty and the crew at YVR Intl. Departures a few weeks ago. Had a short but wholesome conversation with Marty, hearing one of my all-time favorite UA-camrs in person really made my day. I was dropping off my parents for their flight back home, seeing Marty there really sent me back to the days when I was a teenager, knowing not much about cars, watching MightyCarMods videos in my bedroom. I'm lucky to have found my happy place, wrenching under a car getting oil dripping on my face, all the quality time I had with similar minded friends doing similar things. I can't deny that Marty and Moog played a big role on how I became the car enthusiast I am today. Thanks for all the amazing content over the years, and nice to meet you Marty. Hope to see you, and Moog, again at some point!
Such an awesome collab! I went by the shop that day having no idea about this happening and was lucky enough to witness some of the dyno action. Everyone was busy working but Marty spotted me throwing the chopped fingers and gave me a wave, making this MCM fan a happy fellow indeed!
Welcome! 😊 been an LTT fan about the same amount of time as I've followed MCM (roughly 11 years now 😅). Highly suggest watching their feature films, especially Kei to the City. Unbelievable production quality. So cool to see this and Doug collabs so close together. Makes my heart happy
Let's put it this way, ar least it was not as under-enthused as Linus' reaction in this video ... or the throttle fix in between those two takes really did make that much of a difference. I could imagine at 35% it was just a lot louder but not a lot quicker, yet.
Great video guys, I'm one of the 38 😉so I knew it was coming, but it was an awesome collab. I've been waiting to see this episode and can't wait to see what cheapest nugget Moog bought off marketplace, site unseen, in Japan this time.
On behalf of Canadians, I’m so sorry you had to experience one of our two horrible airlines. And I hope your car wasn’t broken into or stolen while you were in Vancouver.
I wonder if MCM thought this Honda was actually Linus's old pink Honda. That would suck if they "thought" it was the other one/the OG Honda. It doesn't actually matter in the end but still lol. I get the feeling.. Love the crossover SO much. Two of my favorite channels together is 110% a win!
Never in my life did I expect a collab like this, let alone hear the words "Kent, Washington", the city right next to me come from your video. Watching these collabs feels like a fever dream!
As a longtime sub to both channels, this is easily the coolest and most unexpected collabs I've ever seen. I really hope y'all do more of this in the future, maybe LTT can do y'all a solid and build you some gaming pcs and home theater upgrades, etc. Would love to see more of this!
It’s kinda surreal, watching Marty from mcm, working with Linus/LTT whom I went to school with and only 10 minutes from my house. This is awesome, wish I could have seen you guys in person.
My two favorite channels in one video! It’s so weird seeing Linus and Marty side by side. Marty really seems to know his stuff about tech based on his comments and comparisons, unlike Linus, who doesn’t know much about cars lol. Please make a part two with turbocharging, and if possible, including Moog as well!
I've always thought modding cars and swapping computer parts had a lot of crossover. It's awesome to see that bigish channel I used to watch 12 years ago, LTT and the MCM, that I've been watching the last 5 do an awesome collab.
Hats off guys, been waiting for a decade for a Canadian collaboration. Absolutely jazzed to see this! Appreciate you gents! From the East Coast of Nova Scotia.
As someone with a 1993 Honda Prelude with a K-Swap compliments of the Hasport kit. A number of K-Tuned parts. A Haltech ECU. And a Wilwood BBK from Fast Brakes this build feels awfully close to home. Of course, my project has taken a lot more time. But this was a blast to watch!
Congrats to both of you from Denmark. You looks like one proud father and i can fully understand you. It is wunderful having kids, so enjoy some time with your little family. Keep up the good work, i love your videos.
10:04 we are going to 3D scan this part, get it all modelled and 3D print an insert. 37:08 is what they ended up with! Good to see they kept up with the "over promise and under deliver" jankiness from their water cooling videos. 🤣
If that Civic was in middle or south Sweden all you would see would be rust, it is horrible and hurts my soul, we use SO MUCH salt and I hate it so much. In north of Sweden they don’t use salt, since they use their brainy cells, and they just plow it, and it works like charm if you use studded tires, they never salt it and it’s so nice. The problem with salt is that it melts the snow, then you get a horrible salt slushy, even your shoes can get coated in salt, it’s that bad, and then that slushy freezes to ice and traffic is chaos, so every other day you either can or can’t get to work amazing right, then you might also hurt yourself badly by slipping on the ice when walking also amazing, love how we can’t handle snow in a northern country, then we have NOT talked about public transport, that is a whole other subject of anxiety, but to summarise snow + public transport is a no no very bad not working no no works not hahah.
I've been watching both of your channels for years. I'm an IT professional so of course I follow LTT. I daily a shitbox Civic and came across this channel years ago when I had to learn a few things. This collab was something I never thought I needed but was amazing. I have 4 LTT screwdrivers and not once did I ever think about making one into a shifter. Now I need this. I don't have a fancy K series...yet. Might have to figure out a way to do with with my D series shifter. Well done.
So weird seeing Martin working with Canadian Tire branded Motomaster products. Very cool. Hopefully you had a good time. Maybe next time you can come out to the East side (the correct side) of the country!
Mcm & Ltt, my 2 top youtubers for over a decade. Swing between PC's and cars depending on the weather. This colab was the bees knees! Dont know if i could have enjoyed it more!
Man, I wish I had known you were here... I would have loved to have met you, bought ya a coffee or something. You guys are great! And your video is so much better than LTTs! LOL
There are many of us car guys that are also tech geeks. Thank you so much for doing this collab. Been looking forward to this video since hearing the car in the background of the WAN show. ;)
Mate.. the Jet lag was absolutely brutal! Like waking up at 1am to work on cars for 10 hours then not be able to sleep afterwards. Woke up a little by the dyno day!
In 2006 i helped a neighbor put a k20 into a crx, he was the 3rd person to ever buy hasport k series swap mounts, he used the harness from an rsx type s, and i remember, we had to clip i think the srs plugs off the harness until a green key showed up on the cluster, well the key ended up showing at 1am on a weeknight, so at 1am with no head lights tails lights and open exhaust we went on a test drive and the entire time he kept getting out to adjust the clutch saying the clutch was slipping, well the next day there were rubber marks every where he said the clutch was slipping, lots of fun memories in that car.
We had a great time over in Canada with the LTT crew. Glad we could make it happen! Want to help make more big videos happen? Check out our all new Tactical Laptop Backpack: mightycarmods.com/products/tactical-laptop-backpack-black-edition
I AM SO GLAD YOU'RE MAKING THIS VIDEO!!! My daily is an '01 civic, IDENTICAL to this one. PLEASE PLEASE PLEASE contact me so I can get parts in order to do a full in-depth build series going!
👍
Hope they finish the interior and the paint!!! It deserves it
Also, is there a detailed parts list of what you upgraded??
Now it's time to go drive in LeMullets or the Freedom 500
Huge thanks for coming out! Did some more remote tuning with the Haltech guys and got even more power out of it, runs great now. Thing is proper quick! (for a Civic) -AC
Would love to see this with a turbo eventually! Been a great series from LTT so far :)
I think we need to see you guys get this dialed and then take it on a track day. That would be a fun video
Cross over merch?
LTTMCM Chopped PC build?
This was a spectacular collab.
(bias admission: long time view of both channels. I own LTT merch (scratchy arms inside that epic pocket hoody but otherwise great) , and have MCM signed posters and T arriving in the mail today. Build my own PC's, and mod my cars (gfb ftw).
@@ZacBernasconi Quite a bit needs to happen before I'd call it track ready. Turns out people hate the 7th gen for good reason lol, the steering rack design is idiotic so the bump steer is pretty bad right now. Over the next couple months though hopefully I can read enough 7th gen forum posts to make all of the little changes to make it proper fast in the corners.
You guys should do a video on how the software to tune the car works, didn't really see any of that and it would certainly fall within the realm of LTT. I'm not a car guy but I'd certainly be interested in what the software can do.
Thanks for including us, boys! Let do it again.
When are we turbocharging this thing?
It’s gotta happen
A bunch of mad lads, doing mad things 🔥 Great collab with LMG & MCM mate
We need the k swap auto awd rd1 swap kit
@mikehoncho666 Is that really a thing for this platform? Because I have a coupe version of this car and that's my dream build for it
This was such a blast and you guys were such a pleasure to work with. Thank you so much for coming up! -LS
Two LTT comments on the same video nice
The Aussie way, ain't a party without your mates! Awesome to see you guys hook up for a build! Any chance we will see you in the land of Aus soon?
Did you correct the ride height in the meantime? Looks terrible in the video, too high in the front and too low in the rear 🤢
@@samteks125 Yeah they fixed the ride height and that weird alignment, it's on the video from the LTT channel.
This was amazing! ❤ Also, if you guys would ever want to do something together, I'm sooooooooo down!
That would be amazing. Please make this happen.
They need to do something to the GTI one of the guys have that'll be so cool
a scrapyard wars x buying cheap broken exotic cars would be sick
Or a Linus truck they can use with Tech but it was bought sight unseen
This needs to happen. Thumb up it!!
Fabricator from LTT here, had an absolute blast with you guys here. Glad you were able to come out 😁. Unfortunately ran out of time to finish the front splitter for it
Hi Justin! I'm amazed you guys managed to do so much.
@@Metal_Maxineit was definitely an all hands on deck situation and couldn't have been done without everyone involved
absolute legends you and the team are!
That means you either didn't have the full three days of time budget, were lacking supplies, or have been overthinking it other than everyone else involved hehe
Thank you for visiting our neck of the woods - hope it wasn't too cold! Great having you on our dyno and awesome job on the Kanadia-Kswap build!
What was the final power figure after the throttle was fixed?
@LinusTechtips should fly to Australia to build them a @mightycarmods themed computer
hackintosh time
Linus would have a blast checking out all their stuff
@@BRUMMSIt’s too bad that Hackintosh’s are more or less dead now.
Mad Server build or Workstation build.
Ha I just made the same comment on the LTT video - please let this happen! :)
It feels surreal seeing Linus talking to Marty 😂😂
Just coming from the LTT vid, this was such a great collab… been watching both for over a decade, so wild!
Totally!
The accent was really jarring for me, hearing them next to each other. I dont hear it when watching normal LTT videos but next to Marty god damn was it obvious haha.
Apparently, MightyCarMods + LinusTechTips = Pimp My Ride
Except the car works when it's done.
We put a TV screen in your headrest, we put 2 TV screens in the floor of your boot, we put a TV screen in your rocker cover, now for the craziest part, we turned your back seat into a tropical fish tank!
Ha ha ha, I thought the same.
This is not the collab i was expecting
I'm all for it tho
100% downvoted because Linus, not watching or sharing this. They should actually research their guests.
@@goodkill1 You are who should do some research, yes, some sh*t show happened with Linus before, but that's all cleared up now, your loss.
@@goodkill1cope
@@goodkill1please touch some grass. They did some mistakes more then a year ago. Calm down and enjoy the nice content.
When you do anything that involves replacing a thermostat or draining all the coolant from a system, it helps to hold the t-stat open on first warmup. I use an Advil (or any other small dissolvable pill) to hold the new t-stat open. It lets coolant flow through the system freely until it disolves, which is usually around the time the fluid is up to temp. I learned this from a Subaru friend while working on my old legacy
Dude this is a fantastic tech tip! Should be pinned to the top.
this is one of the greatest tips ive ever heard
Reduces inflammation too!
Yep, most complain about a low-mount Tstat for that reason, but that lead to the Radiator funnel.
I just usually drill a few small holes in the thermostate to let it flow better. Way easier to get it to bleed and open properly.
15:58 "They have countries here that are connected by land."
BWAHAHA!!! The perspective of an Aussie is hilarious.
A lot of Americans don't know that too.
21:11 "Trans-international travel in a UTE."
Wait. Do Aussies call pickups, UTE's? That's kinda funny if true.
@@samuelgarrod8327there's plenty to rib Americans over no need to make up stuff
@@button-puncherUtility Vehicle
@@button-puncher yes we do if it's got a tray or tub it's a ute
Hopefully Plouffe gets some quieter, less ear bleeding, exhaust. Knew it was loud when you could hear rev on the WAN show lol.
at the end of the vid on the ltt channel they said that they put in another muffler and a cat. So it seems like it's useable now.
omg which WAN show is this.
@@finn3494 one from 3 weeks ago
@@damian007567 it popped up in my feed after MCM's did.
@@finn3494October 26 (25 because timezones?)
Double checked
This is the coolest thing I've seen on youtube for a while
You mean the granddaddy Coolermaster Stacker ofcourse?
First time viewer. Popped over from LTT Channel. Loved you video. Great work.
Welcome!
Not the collab I expected, but one I’m happy to see. MightyCarMods deserve more recognition!
I agree with Moog, maintaining engagement through the years in a platform so competitive as this is really an achievement itself. It was great to see David enjoy the karaoke in Japan
Love seeing Edison merch show up in other videos! And the nerve of Linus suggesting an EV conversion when Marty had a crowbar in his hand 😂
I don't know if I'd call it brave or foolish, possibly both 😂
As a fan watching Linus go from a house to multiple warehouses and MCM from moms garage to flying across the world to build cars just warms my freaking heart to see my favorite channels collab! Thank you!
Holy shit, stratified auto!
He tuned my Mazda MPS 10+ years ago.
My MK6 GTI is pro-tuned by stratified. Happily sitting at a zippy 380ish HP!
Yeah. Former BL MPS owner here, recognised the name instantly!
B.C. is usually pretty good for rust since they don’t get too much snow. Over here in the Canadian prairies where we get snow dumped on us, and salt our roads a bunch, the cars are practically falling apart after 15-20 years. Btw love the collab with LTT!
Yeah most of the rest of Canada gets significantly more snow than BC, and subsequently much more rust.
Plouffe is so lucky, imagine driving a car modified by mcm and ltt
Absolute dream colab here! Started watching MCM so long ago and found LTT years later, but both channels give the best content from the other worlds I love. Thanks for this guys!
I ran into Marty and the crew at YVR Intl. Departures a few weeks ago. Had a short but wholesome conversation with Marty, hearing one of my all-time favorite UA-camrs in person really made my day. I was dropping off my parents for their flight back home, seeing Marty there really sent me back to the days when I was a teenager, knowing not much about cars, watching MightyCarMods videos in my bedroom. I'm lucky to have found my happy place, wrenching under a car getting oil dripping on my face, all the quality time I had with similar minded friends doing similar things. I can't deny that Marty and Moog played a big role on how I became the car enthusiast I am today.
Thanks for all the amazing content over the years, and nice to meet you Marty. Hope to see you, and Moog, again at some point!
Such an awesome collab! I went by the shop that day having no idea about this happening and was lucky enough to witness some of the dyno action. Everyone was busy working but Marty spotted me throwing the chopped fingers and gave me a wave, making this MCM fan a happy fellow indeed!
Coming from the LTT video as a long time follower of them. Instant subscribe to you guys too. Glad to learn of such a cool channel.
Welcome! 😊 been an LTT fan about the same amount of time as I've followed MCM (roughly 11 years now 😅). Highly suggest watching their feature films, especially Kei to the City. Unbelievable production quality. So cool to see this and Doug collabs so close together. Makes my heart happy
@MiDLiFECRYSiS Thank you! I look forward to it!
That was excellent! Nice one! Watched the LTT but loved the long form of this.
Loved Plouffes reacation to the car over on the LTT channel.
Let's put it this way, ar least it was not as under-enthused as Linus' reaction in this video ... or the throttle fix in between those two takes really did make that much of a difference. I could imagine at 35% it was just a lot louder but not a lot quicker, yet.
Love this. Two of my favorite channels together in a collab. Great work!
New subscriber from LTT! Loved the vibe🔥🔥
Marty! I appreciate the ode to Leslie Nielsen in "Airplane!" with the swallowing the earplugs hahah
Love the stylistic differences MCM and LTT chose in the filming of this upgrade. Seeing the same thing from two perspectives.
Great video guys, I'm one of the 38 😉so I knew it was coming, but it was an awesome collab. I've been waiting to see this episode and can't wait to see what cheapest nugget Moog bought off marketplace, site unseen, in Japan this time.
From the LTT video straight onto this one.. Wow did you guys ever do an amazing job
How about a collab poster on the Civic with LTT and Mighty?! Would love to cherish this video!!!
To balance out the rear wing you should add a Front Spoilers/Splitters
It was planned by they ran out of time. A guy from the Canadian crew left a comment in here to let us know.
Front Spoilers/Splitters was being made but didn't make it on time for the final day of the shoot. I'm pretty sure LTT will give us an update on it.
Bloody good effort gentlemen,Linus is UA-cam royalty,excellent accomplishment to collaborate with a top tier UA-cam channel,fire content bro
On behalf of Canadians, I’m so sorry you had to experience one of our two horrible airlines. And I hope your car wasn’t broken into or stolen while you were in Vancouver.
You got yourselves a new sub 😁You guys did an amazing job over at LTT. 😁👍💖💖💖
Brings a tear to my eye to see 2 UA-cam Channels I've followed for what seems like half my life time now, working in a vid together.
I wonder if MCM thought this Honda was actually Linus's old pink Honda. That would suck if they "thought" it was the other one/the OG Honda. It doesn't actually matter in the end but still lol. I get the feeling.. Love the crossover SO much. Two of my favorite channels together is 110% a win!
MCM and LTT are the OG channels and been watching them for ages. Finally, they blessed us with a collab that we all deserved.
Also, why does that wing actually really suit the car? I love it. 41:47
So when is Turbo Yoda going over to put a racing snail on it?
This is an awesome collab 🎉
Seeing Marty and Dave in the bar was awesome 😂😊
See you work on a car with BC plates warms my cold Canadian heart ❤🇨🇦
Would loved to have seen speed academy boys join in on this too
Never in my life did I expect a collab like this, let alone hear the words "Kent, Washington", the city right next to me come from your video. Watching these collabs feels like a fever dream!
Honestly haven't smiled this much recently and it's a nice uplift in spirits
As a longtime sub to both channels, this is easily the coolest and most unexpected collabs I've ever seen. I really hope y'all do more of this in the future, maybe LTT can do y'all a solid and build you some gaming pcs and home theater upgrades, etc. Would love to see more of this!
Can't believe you guys came to Canada and didn't tell anyone, been watching the show for like 15 years and would have come to a meet up for sure
Doubt they had any time for anything else.
... aaaand that's exactly why they did not tell everyone beforehand.
It’s kinda surreal, watching Marty from mcm, working with Linus/LTT whom I went to school with and only 10 minutes from my house.
This is awesome, wish I could have seen you guys in person.
I gotta say the video turned out pretty good. Good work guys.
🤔 thinking it's called dump tuning when It comes to Canada fixes 😂😂😂😂😊 well done Marty great episode
The fact that Marty went to Canada for a collab with LTT before a collab with Dankpods/Garbage Time is absolutely criminal.
It really is
Absolutely this!!
Great collab! thanks for the vid ✌
Never would have thought these channels would collaborate.
Love it 😂
Definitely a good time. Good build mate. Cheers!
This colab was pretty unexpected JUST LIKE THIS VIDEO'S SPONSOR 🤣
I would have never thought I would see Linus and marty in a car together but it's the best thing ever
The Eurobeat caught me off guard, well played
Well the car does look like it it could be a side characters car in initial D but yeah it was pretty unexpected but welcomed
love the acting and drama....nice add on the initial D music-style while running in Japan!
😄
Great that you came to our side of the world! ;)
As a Finnish person its funny to see you say its freezing cold, it seems like a normal summer day to me and even Linus is out with a t-shirt 😂
Yeah they were in the warmest part of Canada
Viewer #14 of the unicorn circuit checking in 🦄
#35 checking in!
#27 aswell!
ah yes, Now I can finally watch the real version of the LTT video
It was simultaneously really normal and really odd to see Linus, Alex and Jake on screen. Excellent video, gents. Sex spec must live on forever.
My two favorite channels in one video! It’s so weird seeing Linus and Marty side by side. Marty really seems to know his stuff about tech based on his comments and comparisons, unlike Linus, who doesn’t know much about cars lol. Please make a part two with turbocharging, and if possible, including Moog as well!
Just don’t ask me a windows question 😶
I've always thought modding cars and swapping computer parts had a lot of crossover. It's awesome to see that bigish channel I used to watch 12 years ago, LTT and the MCM, that I've been watching the last 5 do an awesome collab.
As a local Vancouverite they will get a box 2 Vehicle inspection for that exhaust so hopefully they change it soon 😂
He just has to stay away from VPD, Surrey RCMP is used to straight-piped Honda's and V6 Chargers
They did change it 😁
Hats off guys, been waiting for a decade for a Canadian collaboration. Absolutely jazzed to see this! Appreciate you gents! From the East Coast of Nova Scotia.
I'm so use to seeing Marty stand next to Scott and looking real short. Seeing him net to Linus reminds me that the boys are actually pretty tall.
Linus is also pretty short.
@@joewaun894 Yeah, hes like 5'6". The MCM boys are around 6' to 6'1". Scott has to be atleast 6'5", 6'6".
Scott is gigantic. I'd love to see him next to Linus.
@@iticklechickens I seem to remember Scott saying in a video years ago that he was over 7 feet tall? Thought he said 2.2 metres but I could be wrong.
@@StopDropandLOL 7'8", but those are two separate measurements
Pretty cool that the guys can just drive across to the southern state of Canada to pick up the parts...
The collab nobody expected but the one we all needed!! This is just EPIC!!!!!
Bryon's Knuckles at 33:40 tells me how much hard work and passion he has on working on cars/projects like this! Great video
As someone with a 1993 Honda Prelude with a K-Swap compliments of the Hasport kit. A number of K-Tuned parts. A Haltech ECU. And a Wilwood BBK from Fast Brakes this build feels awfully close to home.
Of course, my project has taken a lot more time. But this was a blast to watch!
There’s definitely a part 2…. Turbo
Best Colab ever! thank you!
I’m gonna need a longer lunch break
even though it isnt his car, nor built for him, seeing linus himself in the drivers seat reacting... priceless. love it
So when are you heading back to LTT to mount a turbo onto that sh*tbox?
Welcome to the right-side-up hemisphere. happy to have ya mate.
why does this feel like when your parents and your in-laws meet?
Because most people hate their in-laws and this makes them cringe?
Congrats to both of you from Denmark.
You looks like one proud father and i can fully understand you. It is wunderful having kids, so enjoy some time with your little family.
Keep up the good work, i love your videos.
10:04 we are going to 3D scan this part, get it all modelled and 3D print an insert.
37:08 is what they ended up with!
Good to see they kept up with the "over promise and under deliver" jankiness from their water cooling videos. 🤣
I'm pretty sure Alex has a contract rider ensuring a base level of jankiness for all videos he appears in.
@@SomeNameGoesHere Love this
If that Civic was in middle or south Sweden all you would see would be rust, it is horrible and hurts my soul, we use SO MUCH salt and I hate it so much. In north of Sweden they don’t use salt, since they use their brainy cells, and they just plow it, and it works like charm if you use studded tires, they never salt it and it’s so nice. The problem with salt is that it melts the snow, then you get a horrible salt slushy, even your shoes can get coated in salt, it’s that bad, and then that slushy freezes to ice and traffic is chaos, so every other day you either can or can’t get to work amazing right, then you might also hurt yourself badly by slipping on the ice when walking also amazing, love how we can’t handle snow in a northern country, then we have NOT talked about public transport, that is a whole other subject of anxiety, but to summarise snow + public transport is a no no very bad not working no no works not hahah.
I've been watching both of your channels for years. I'm an IT professional so of course I follow LTT. I daily a shitbox Civic and came across this channel years ago when I had to learn a few things. This collab was something I never thought I needed but was amazing. I have 4 LTT screwdrivers and not once did I ever think about making one into a shifter. Now I need this. I don't have a fancy K series...yet. Might have to figure out a way to do with with my D series shifter. Well done.
Love you guys , dont forget the tim bits haha
the crossover we don't deserve
So weird seeing Martin working with Canadian Tire branded Motomaster products. Very cool. Hopefully you had a good time. Maybe next time you can come out to the East side (the correct side) of the country!
What an epic crossover. Now the world patiently waits for VGG and MCM to work together
That would be awesome!
As number 39 I'm constantly missed out... this collaboration would definitely make up for my hurt feelings 😂🎉 vvg/mcm crx build
A collab with VGG or B is for Build would more than make up for this.
Mcm & Ltt, my 2 top youtubers for over a decade. Swing between PC's and cars depending on the weather. This colab was the bees knees! Dont know if i could have enjoyed it more!
It's so odd to see how human Aussies look compared to Canadians
Man, I wish I had known you were here... I would have loved to have met you, bought ya a coffee or something. You guys are great! And your video is so much better than LTTs! LOL
Enjoyed every min of this vid! You nailed it!
There are many of us car guys that are also tech geeks. Thank you so much for doing this collab. Been looking forward to this video since hearing the car in the background of the WAN show. ;)
LTT? Yeah na.
Marty you look tired AF
Mate.. the Jet lag was absolutely brutal! Like waking up at 1am to work on cars for 10 hours then not be able to sleep afterwards. Woke up a little by the dyno day!
In 2006 i helped a neighbor put a k20 into a crx, he was the 3rd person to ever buy hasport k series swap mounts, he used the harness from an rsx type s, and i remember, we had to clip i think the srs plugs off the harness until a green key showed up on the cluster, well the key ended up showing at 1am on a weeknight, so at 1am with no head lights tails lights and open exhaust we went on a test drive and the entire time he kept getting out to adjust the clutch saying the clutch was slipping, well the next day there were rubber marks every where he said the clutch was slipping, lots of fun memories in that car.