We had a great time over in Canada with the LTT crew. Glad we could make it happen! Want to help make more big videos happen? Check out our all new Tactical Laptop Backpack: mightycarmods.com/products/tactical-laptop-backpack-black-edition
I AM SO GLAD YOU'RE MAKING THIS VIDEO!!! My daily is an '01 civic, IDENTICAL to this one. PLEASE PLEASE PLEASE contact me so I can get parts in order to do a full in-depth build series going!
Huge thanks for coming out! Did some more remote tuning with the Haltech guys and got even more power out of it, runs great now. Thing is proper quick! (for a Civic) -AC
Cross over merch? LTTMCM Chopped PC build? This was a spectacular collab. (bias admission: long time view of both channels. I own LTT merch (scratchy arms inside that epic pocket hoody but otherwise great) , and have MCM signed posters and T arriving in the mail today. Build my own PC's, and mod my cars (gfb ftw).
@@ZacBernasconi Quite a bit needs to happen before I'd call it track ready. Turns out people hate the 7th gen for good reason lol, the steering rack design is idiotic so the bump steer is pretty bad right now. Over the next couple months though hopefully I can read enough 7th gen forum posts to make all of the little changes to make it proper fast in the corners.
You guys should do a video on how the software to tune the car works, didn't really see any of that and it would certainly fall within the realm of LTT. I'm not a car guy but I'd certainly be interested in what the software can do.
Fabricator from LTT here, had an absolute blast with you guys here. Glad you were able to come out 😁. Unfortunately ran out of time to finish the front splitter for it
That means you either didn't have the full three days of time budget, were lacking supplies, or have been overthinking it other than everyone else involved hehe
@@misatzu Dude if you know even the first thing about aerodynamics you know that it's a rabbit hole, especially trying to compensate for a giant wang on the back of a car like that. I'd give Justin the benefit of the doubt in this case. He seems like a good dude.
I ran into Marty and the crew at YVR Intl. Departures a few weeks ago. Had a short but wholesome conversation with Marty, hearing one of my all-time favorite UA-camrs in person really made my day. I was dropping off my parents for their flight back home, seeing Marty there really sent me back to the days when I was a teenager, knowing not much about cars, watching MightyCarMods videos in my bedroom. I'm lucky to have found my happy place, wrenching under a car getting oil dripping on my face, all the quality time I had with similar minded friends doing similar things. I can't deny that Marty and Moog played a big role on how I became the car enthusiast I am today. Thanks for all the amazing content over the years, and nice to meet you Marty. Hope to see you, and Moog, again at some point!
As a fan watching Linus go from a house to multiple warehouses and MCM from moms garage to flying across the world to build cars just warms my freaking heart to see my favorite channels collab! Thank you!
The UA-cam algorithm is bad this is my first exposure to Linus. I'm not really a tech geek though, but I have been building my own PCs for 2 decades. Honestly, I was just excited to see the MiniDSP and other audio upgrades make an appearance outside my small niche car audio community.
We put a TV screen in your headrest, we put 2 TV screens in the floor of your boot, we put a TV screen in your rocker cover, now for the craziest part, we turned your back seat into a tropical fish tank!
B.C. is usually pretty good for rust since they don’t get too much snow. Over here in the Canadian prairies where we get snow dumped on us, and salt our roads a bunch, the cars are practically falling apart after 15-20 years. Btw love the collab with LTT!
Well, they are also in the least wintery part of BC. All the comments on Canada being cold in the video! It almost never snows where they filmed this. If they had been there a few months earlier, they would have been complaining about the heat 😂
Not a lot of salt in the actual prairie in Canada. It's too cold for salt so our mixture is usually 95/5 sand/salt. But in the shield in Ontario you'll see more salt
The accent was really jarring for me, hearing them next to each other. I dont hear it when watching normal LTT videos but next to Marty god damn was it obvious haha.
I absolutely felt the same way. I mean I could drive up there to Vancouver in less than 3 and 1/2 hours and check out the place or get on a plane trip and head to Australia and see family friends and of course the mighty car mod crew at one of the meets. But seeing both of these teams on one set? I did not expect it at all😁
Such an awesome collab! I went by the shop that day having no idea about this happening and was lucky enough to witness some of the dyno action. Everyone was busy working but Marty spotted me throwing the chopped fingers and gave me a wave, making this MCM fan a happy fellow indeed!
When you do anything that involves replacing a thermostat or draining all the coolant from a system, it helps to hold the t-stat open on first warmup. I use an Advil (or any other small dissolvable pill) to hold the new t-stat open. It lets coolant flow through the system freely until it disolves, which is usually around the time the fluid is up to temp. I learned this from a Subaru friend while working on my old legacy
I agree with Moog, maintaining engagement through the years in a platform so competitive as this is really an achievement itself. It was great to see David enjoy the karaoke in Japan
Absolute dream colab here! Started watching MCM so long ago and found LTT years later, but both channels give the best content from the other worlds I love. Thanks for this guys!
So happy the two channels that made me who I am today from such a young age are now mixing like how the two hobbies are mixing for me in adult hood. It’s amazing fr thank you
My two favorite channels in one video! It’s so weird seeing Linus and Marty side by side. Marty really seems to know his stuff about tech based on his comments and comparisons, unlike Linus, who doesn’t know much about cars lol. Please make a part two with turbocharging, and if possible, including Moog as well!
@@mightycarmods I mean you know how to Hackintosh Marty so you've got some general knowledge there. Also find this funny as a PC guy who fixes Mac's on the daily.
Being someone from Canada who's into cars and computers, I've been a long time fan of both MCM and LTT and I can say this is a collab I did not expect but am very happy to see! Another lovely videos fellas!
Let's put it this way, ar least it was not as under-enthused as Linus' reaction in this video ... or the throttle fix in between those two takes really did make that much of a difference. I could imagine at 35% it was just a lot louder but not a lot quicker, yet.
This made me so happy. Love you guys and have watched for over a decade, and more recently discovered LTT, which i think are the equivalent to yours in computer build form. This was the collab that nobody knew they wanted!
Great video guys, I'm one of the 38 😉so I knew it was coming, but it was an awesome collab. I've been waiting to see this episode and can't wait to see what cheapest nugget Moog bought off marketplace, site unseen, in Japan this time.
Welcome! 😊 been an LTT fan about the same amount of time as I've followed MCM (roughly 11 years now 😅). Highly suggest watching their feature films, especially Kei to the City. Unbelievable production quality. So cool to see this and Doug collabs so close together. Makes my heart happy
Welcome, you have some amazing series to catch up on, mcm have some great car tech tips! I've been following MCM and LTT since I was in school, for better or worse I've learned a lot from both channels, now I have a project car and a server rack at home...
Loved the video.. Seeing Linus with you guys was awesome... A collaboration of two different worlds im passionate about.. Thanks guys. Also, having to listen to the different type of english accents throughout the video was so much fun 😁
As a longtime sub to both channels, this is easily the coolest and most unexpected collabs I've ever seen. I really hope y'all do more of this in the future, maybe LTT can do y'all a solid and build you some gaming pcs and home theater upgrades, etc. Would love to see more of this!
Hats off guys, been waiting for a decade for a Canadian collaboration. Absolutely jazzed to see this! Appreciate you gents! From the East Coast of Nova Scotia.
It’s kinda surreal, watching Marty from mcm, working with Linus/LTT whom I went to school with and only 10 minutes from my house. This is awesome, wish I could have seen you guys in person.
Watched the LTT vid and this one.. and you guys just make it Cinema.. LTT is what happened.. Your vid is an engaging story!! So much more involved. Luved it!!
Like I said on the LTT channel, you two have been my favorite chaqnnels for 10 years and to see you guys collab was absolutely wonderful! Thank you so much!
Man, I wish I had known you were here... I would have loved to have met you, bought ya a coffee or something. You guys are great! And your video is so much better than LTTs! LOL
Never in my life did I expect a collab like this, let alone hear the words "Kent, Washington", the city right next to me come from your video. Watching these collabs feels like a fever dream!
As someone with a 1993 Honda Prelude with a K-Swap compliments of the Hasport kit. A number of K-Tuned parts. A Haltech ECU. And a Wilwood BBK from Fast Brakes this build feels awfully close to home. Of course, my project has taken a lot more time. But this was a blast to watch!
@@jonathanwright5550 No, keeping this NA. Not a drag car. It is built out for endurance racing. Adding a turbo would likely overpower the front wheels and just leave a lot of torque steer to deal with.
I came over from Floatplane to subscribe after the videos on the LTT channel there. Will probably end up watching a fair bit of your content in the coming days
One thing I've learned throughout my years is that PC guys and Car guys are the exact same but, different. Same jokes, same sticker memes. Love this collaboration and it was about time we got this crossover.
Fun fact about this green crow bar @ 9:37 it's from some Nvidia launch and it was in background of wan show for years as show piece before they started use it as a crowbar.
This is the crossover i didnt know i needed! Love both of these channels deeply. I wish it wasn't so rushed tho, why limit your time so much... Linus has more money than God, he can afford to put you guys up for another week lol
Mighty Car Mods, Haltech and Vtec Academy deserves a huge thank you and much more gratitude than LTT cares to give. This type of project would have meant the world to many people that never had this opportunity.
I've been watching both of your channels for years. I'm an IT professional so of course I follow LTT. I daily a shitbox Civic and came across this channel years ago when I had to learn a few things. This collab was something I never thought I needed but was amazing. I have 4 LTT screwdrivers and not once did I ever think about making one into a shifter. Now I need this. I don't have a fancy K series...yet. Might have to figure out a way to do with with my D series shifter. Well done.
We had a great time over in Canada with the LTT crew. Glad we could make it happen! Want to help make more big videos happen? Check out our all new Tactical Laptop Backpack: mightycarmods.com/products/tactical-laptop-backpack-black-edition
I AM SO GLAD YOU'RE MAKING THIS VIDEO!!! My daily is an '01 civic, IDENTICAL to this one. PLEASE PLEASE PLEASE contact me so I can get parts in order to do a full in-depth build series going!
👍
Hope they finish the interior and the paint!!! It deserves it
Also, is there a detailed parts list of what you upgraded??
Now it's time to go drive in LeMullets or the Freedom 500
Thanks for including us, boys! Let do it again.
When are we turbocharging this thing?
It’s gotta happen
A bunch of mad lads, doing mad things 🔥 Great collab with LMG & MCM mate
We need the k swap auto awd rd1 swap kit
@mikehoncho666 Is that really a thing for this platform? Because I have a coupe version of this car and that's my dream build for it
This was such a blast and you guys were such a pleasure to work with. Thank you so much for coming up! -LS
Two LTT comments on the same video nice
The Aussie way, ain't a party without your mates! Awesome to see you guys hook up for a build! Any chance we will see you in the land of Aus soon?
Did you correct the ride height in the meantime? Looks terrible in the video, too high in the front and too low in the rear 🤢
@@samteks125 Yeah they fixed the ride height and that weird alignment, it's on the video from the LTT channel.
Sorry about the exhaust noise in the WAN show 😂 glad it’s all sorted now. Appreciate you hosting us.
Huge thanks for coming out! Did some more remote tuning with the Haltech guys and got even more power out of it, runs great now. Thing is proper quick! (for a Civic) -AC
Would love to see this with a turbo eventually! Been a great series from LTT so far :)
I think we need to see you guys get this dialed and then take it on a track day. That would be a fun video
Cross over merch?
LTTMCM Chopped PC build?
This was a spectacular collab.
(bias admission: long time view of both channels. I own LTT merch (scratchy arms inside that epic pocket hoody but otherwise great) , and have MCM signed posters and T arriving in the mail today. Build my own PC's, and mod my cars (gfb ftw).
@@ZacBernasconi Quite a bit needs to happen before I'd call it track ready. Turns out people hate the 7th gen for good reason lol, the steering rack design is idiotic so the bump steer is pretty bad right now. Over the next couple months though hopefully I can read enough 7th gen forum posts to make all of the little changes to make it proper fast in the corners.
You guys should do a video on how the software to tune the car works, didn't really see any of that and it would certainly fall within the realm of LTT. I'm not a car guy but I'd certainly be interested in what the software can do.
This was amazing! ❤ Also, if you guys would ever want to do something together, I'm sooooooooo down!
That would be amazing. Please make this happen.
They need to do something to the GTI one of the guys have that'll be so cool
a scrapyard wars x buying cheap broken exotic cars would be sick
Or a Linus truck they can use with Tech but it was bought sight unseen
This needs to happen. Thumb up it!!
Fabricator from LTT here, had an absolute blast with you guys here. Glad you were able to come out 😁. Unfortunately ran out of time to finish the front splitter for it
Hi Justin! I'm amazed you guys managed to do so much.
@@Metal_Maxineit was definitely an all hands on deck situation and couldn't have been done without everyone involved
absolute legends you and the team are!
That means you either didn't have the full three days of time budget, were lacking supplies, or have been overthinking it other than everyone else involved hehe
@@misatzu Dude if you know even the first thing about aerodynamics you know that it's a rabbit hole, especially trying to compensate for a giant wang on the back of a car like that. I'd give Justin the benefit of the doubt in this case. He seems like a good dude.
I ran into Marty and the crew at YVR Intl. Departures a few weeks ago. Had a short but wholesome conversation with Marty, hearing one of my all-time favorite UA-camrs in person really made my day. I was dropping off my parents for their flight back home, seeing Marty there really sent me back to the days when I was a teenager, knowing not much about cars, watching MightyCarMods videos in my bedroom. I'm lucky to have found my happy place, wrenching under a car getting oil dripping on my face, all the quality time I had with similar minded friends doing similar things. I can't deny that Marty and Moog played a big role on how I became the car enthusiast I am today.
Thanks for all the amazing content over the years, and nice to meet you Marty. Hope to see you, and Moog, again at some point!
Thank you for visiting our neck of the woods - hope it wasn't too cold! Great having you on our dyno and awesome job on the Kanadia-Kswap build!
What was the final power figure after the throttle was fixed?
Hey, Alex! Too many of our worlds are crossing over from the Mazdaspeed days!
Using jackstands like real men 💪
I thought you guys were in Richmond near the night market?
I love how much novelty you find in the concept of two countries with a land border
@LinusTechtips should fly to Australia to build them a @mightycarmods themed computer
hackintosh time
Linus would have a blast checking out all their stuff
@@BRUMMSIt’s too bad that Hackintosh’s are more or less dead now.
Mad Server build or Workstation build.
Ha I just made the same comment on the LTT video - please let this happen! :)
As a fan watching Linus go from a house to multiple warehouses and MCM from moms garage to flying across the world to build cars just warms my freaking heart to see my favorite channels collab! Thank you!
The UA-cam algorithm is bad this is my first exposure to Linus. I'm not really a tech geek though, but I have been building my own PCs for 2 decades. Honestly, I was just excited to see the MiniDSP and other audio upgrades make an appearance outside my small niche car audio community.
15:58 "They have countries here that are connected by land."
BWAHAHA!!! The perspective of an Aussie is hilarious.
A lot of Americans don't know that too.
21:11 "Trans-international travel in a UTE."
Wait. Do Aussies call pickups, UTE's? That's kinda funny if true.
@@samuelgarrod8327there's plenty to rib Americans over no need to make up stuff
@@button-puncherUtility Vehicle
@@button-puncher yes we do if it's got a tray or tub it's a ute
First time viewer. Popped over from LTT Channel. Loved you video. Great work.
Welcome!
Welcome mate!
Apparently, MightyCarMods + LinusTechTips = Pimp My Ride
Except the car works when it's done.
We put a TV screen in your headrest, we put 2 TV screens in the floor of your boot, we put a TV screen in your rocker cover, now for the craziest part, we turned your back seat into a tropical fish tank!
Ha ha ha, I thought the same.
@@dylanslater83 don't forget TV's in the mudflaps!
This is the path to bringing sex spec back. Moog, I hope you're reading this.
B.C. is usually pretty good for rust since they don’t get too much snow. Over here in the Canadian prairies where we get snow dumped on us, and salt our roads a bunch, the cars are practically falling apart after 15-20 years. Btw love the collab with LTT!
Yeah most of the rest of Canada gets significantly more snow than BC, and subsequently much more rust.
Well, they are also in the least wintery part of BC. All the comments on Canada being cold in the video! It almost never snows where they filmed this. If they had been there a few months earlier, they would have been complaining about the heat 😂
@@Bobbiasthe part of BC that I live in gets more snow than most of the rest of Canada.
Not a lot of salt in the actual prairie in Canada. It's too cold for salt so our mixture is usually 95/5 sand/salt. But in the shield in Ontario you'll see more salt
Atlantic provinces cars rot out in 10 years if no undercoating or rust preventions done lol
This is not the collab i was expecting
I'm all for it tho
100% downvoted because Linus, not watching or sharing this. They should actually research their guests.
@@goodkill1 You are who should do some research, yes, some sh*t show happened with Linus before, but that's all cleared up now, your loss.
@@goodkill1cope
@@goodkill1please touch some grass. They did some mistakes more then a year ago. Calm down and enjoy the nice content.
When a friend first showed me the MCM channel, i was like "oh its like tech but for cars!" this collab is probably the best thing i could imagine :)
It feels surreal seeing Linus talking to Marty 😂😂
Just coming from the LTT vid, this was such a great collab… been watching both for over a decade, so wild!
Totally!
The accent was really jarring for me, hearing them next to each other. I dont hear it when watching normal LTT videos but next to Marty god damn was it obvious haha.
With Marty there there won't be fuqups
I absolutely felt the same way. I mean I could drive up there to Vancouver in less than 3 and 1/2 hours and check out the place or get on a plane trip and head to Australia and see family friends and of course the mighty car mod crew at one of the meets.
But seeing both of these teams on one set? I did not expect it at all😁
Such an awesome collab! I went by the shop that day having no idea about this happening and was lucky enough to witness some of the dyno action. Everyone was busy working but Marty spotted me throwing the chopped fingers and gave me a wave, making this MCM fan a happy fellow indeed!
When you do anything that involves replacing a thermostat or draining all the coolant from a system, it helps to hold the t-stat open on first warmup. I use an Advil (or any other small dissolvable pill) to hold the new t-stat open. It lets coolant flow through the system freely until it disolves, which is usually around the time the fluid is up to temp. I learned this from a Subaru friend while working on my old legacy
Dude this is a fantastic tech tip! Should be pinned to the top.
this is one of the greatest tips ive ever heard
Reduces inflammation too!
Yep, most complain about a low-mount Tstat for that reason, but that lead to the Radiator funnel.
I just usually drill a few small holes in the thermostate to let it flow better. Way easier to get it to bleed and open properly.
This was awesome! Been a fan of both channels for many many years and it was great to see everyone come together to do what they love! GG
I agree with Moog, maintaining engagement through the years in a platform so competitive as this is really an achievement itself. It was great to see David enjoy the karaoke in Japan
Absolute dream colab here! Started watching MCM so long ago and found LTT years later, but both channels give the best content from the other worlds I love. Thanks for this guys!
This is the coolest thing I've seen on youtube for a while
You mean the granddaddy Coolermaster Stacker ofcourse?
It sure is help made my Friday that's for sure!
Great collab! thanks for the vid ✌
Plouffe is so lucky, imagine driving a car modified by mcm and ltt
And Doug demuro “This IS”ed it so UA-cam Famous now
Now he owns not only a sick monitor
I've been watching BOTH you and LTT actively since 2011. This collab was a dream come true. Simply put: fantastic.
Hopefully Plouffe gets some quieter, less ear bleeding, exhaust. Knew it was loud when you could hear rev on the WAN show lol.
at the end of the vid on the ltt channel they said that they put in another muffler and a cat. So it seems like it's useable now.
omg which WAN show is this.
@@finn3494 one from 3 weeks ago
@@damian007567 it popped up in my feed after MCM's did.
@@finn3494October 26 (25 because timezones?)
Double checked
What an awesome video!!! Brilliant!! Thanks for the awesome watch!
Not the collab I expected, but one I’m happy to see. MightyCarMods deserve more recognition!
So happy the two channels that made me who I am today from such a young age are now mixing like how the two hobbies are mixing for me in adult hood. It’s amazing fr thank you
My two favorite channels in one video! It’s so weird seeing Linus and Marty side by side. Marty really seems to know his stuff about tech based on his comments and comparisons, unlike Linus, who doesn’t know much about cars lol. Please make a part two with turbocharging, and if possible, including Moog as well!
Just don’t ask me a windows question 😶
@@mightycarmods I mean you know how to Hackintosh Marty so you've got some general knowledge there. Also find this funny as a PC guy who fixes Mac's on the daily.
Love the stylistic differences MCM and LTT chose in the filming of this upgrade. Seeing the same thing from two perspectives.
Love seeing Edison merch show up in other videos! And the nerve of Linus suggesting an EV conversion when Marty had a crowbar in his hand 😂
I don't know if I'd call it brave or foolish, possibly both 😂
Missed the Edison merch. Whom was wearing it?
Being someone from Canada who's into cars and computers, I've been a long time fan of both MCM and LTT and I can say this is a collab I did not expect but am very happy to see! Another lovely videos fellas!
Holy shit, stratified auto!
He tuned my Mazda MPS 10+ years ago.
My MK6 GTI is pro-tuned by stratified. Happily sitting at a zippy 380ish HP!
Yeah. Former BL MPS owner here, recognised the name instantly!
Been following you guys since Roadkill. Couldn't believe you finally got to collab with LTT!
Marty! I appreciate the ode to Leslie Nielsen in "Airplane!" with the swallowing the earplugs hahah
Thank you guys for coming together on this. Loved it!
I gotta say the video turned out pretty good. Good work guys.
What a journey, love the crossover guys!
Loved Plouffes reacation to the car over on the LTT channel.
Let's put it this way, ar least it was not as under-enthused as Linus' reaction in this video ... or the throttle fix in between those two takes really did make that much of a difference. I could imagine at 35% it was just a lot louder but not a lot quicker, yet.
This made me so happy. Love you guys and have watched for over a decade, and more recently discovered LTT, which i think are the equivalent to yours in computer build form. This was the collab that nobody knew they wanted!
Great video guys, I'm one of the 38 😉so I knew it was coming, but it was an awesome collab. I've been waiting to see this episode and can't wait to see what cheapest nugget Moog bought off marketplace, site unseen, in Japan this time.
Definitely a good time. Good build mate. Cheers!
Best Colab ever! thank you!
Marty going full GOD MODE with the A Team that could make automotive fank of the year. If only they had a Turbo Yoda to enable the lords of boost!!
Episode 2 ;-)
Brings a tear to my eye to see 2 UA-cam Channels I've followed for what seems like half my life time now, working in a vid together.
From the LTT video straight onto this one.. Wow did you guys ever do an amazing job
Coming from the LTT video as a long time follower of them. Instant subscribe to you guys too. Glad to learn of such a cool channel.
Welcome! 😊 been an LTT fan about the same amount of time as I've followed MCM (roughly 11 years now 😅). Highly suggest watching their feature films, especially Kei to the City. Unbelievable production quality. So cool to see this and Doug collabs so close together. Makes my heart happy
@MiDLiFECRYSiS Thank you! I look forward to it!
Welcome, you have some amazing series to catch up on, mcm have some great car tech tips!
I've been following MCM and LTT since I was in school, for better or worse I've learned a lot from both channels, now I have a project car and a server rack at home...
15:58 "But they have countries here that are connected by land. I know!"
This is really funny to hear as a European
love the acting and drama....nice add on the initial D music-style while running in Japan!
😄
Great that you came to our side of the world! ;)
Welcome to the right-side-up hemisphere. happy to have ya mate.
The collab nobody expected but the one we all needed!! This is just EPIC!!!!!
Loved the video.. Seeing Linus with you guys was awesome... A collaboration of two different worlds im passionate about.. Thanks guys.
Also, having to listen to the different type of english accents throughout the video was so much fun 😁
MCM and LTT are the OG channels and been watching them for ages. Finally, they blessed us with a collab that we all deserved.
As a longtime sub to both channels, this is easily the coolest and most unexpected collabs I've ever seen. I really hope y'all do more of this in the future, maybe LTT can do y'all a solid and build you some gaming pcs and home theater upgrades, etc. Would love to see more of this!
So, no shame on LTT, I'm a follower there too, but the way you guys edited the "same" content it miles better. Keep the good work!
Different audiences I guess, but I think the videos compliment each other really well
Hats off guys, been waiting for a decade for a Canadian collaboration. Absolutely jazzed to see this! Appreciate you gents! From the East Coast of Nova Scotia.
It’s kinda surreal, watching Marty from mcm, working with Linus/LTT whom I went to school with and only 10 minutes from my house.
This is awesome, wish I could have seen you guys in person.
I love both channels and this was a great collaboration that is def worth a watch and rewatch
Watched the LTT vid and this one.. and you guys just make it Cinema.. LTT is what happened.. Your vid is an engaging story!! So much more involved. Luved it!!
Ive been watching you guys since season 1, never did I think you'd ever collab with LTT. so cool!
Never would have thought these channels would collaborate.
Love it 😂
Bloody legends! :) So happy you were in my neck of the woods.
Honestly haven't smiled this much recently and it's a nice uplift in spirits
Like I said on the LTT channel, you two have been my favorite chaqnnels for 10 years and to see you guys collab was absolutely wonderful! Thank you so much!
The fact that Marty went to Canada for a collab with LTT before a collab with Dankpods/Garbage Time is absolutely criminal.
It really is
Absolutely this!!
Man, I wish I had known you were here... I would have loved to have met you, bought ya a coffee or something. You guys are great! And your video is so much better than LTTs! LOL
Never in my life did I expect a collab like this, let alone hear the words "Kent, Washington", the city right next to me come from your video. Watching these collabs feels like a fever dream!
Idk if someone's said this before but i love when the Haltech guys are in the videos fkin around MCM style
Love from Sydney 💚
As someone with a 1993 Honda Prelude with a K-Swap compliments of the Hasport kit. A number of K-Tuned parts. A Haltech ECU. And a Wilwood BBK from Fast Brakes this build feels awfully close to home.
Of course, my project has taken a lot more time. But this was a blast to watch!
Turbo time???
@@jonathanwright5550 No, keeping this NA.
Not a drag car. It is built out for endurance racing. Adding a turbo would likely overpower the front wheels and just leave a lot of torque steer to deal with.
Watched the LLT and awaited for this, A great watch from Both teams!!!! Well done!
Also, why does that wing actually really suit the car? I love it. 41:47
I came over from Floatplane to subscribe after the videos on the LTT channel there. Will probably end up watching a fair bit of your content in the coming days
That was excellent! Nice one! Watched the LTT but loved the long form of this.
Absolutely no disrespect to the roadkill MCM collab. This was levels above all of that. I love this!
As a Finnish person its funny to see you say its freezing cold, it seems like a normal summer day to me and even Linus is out with a t-shirt 😂
Yeah they were in the warmest part of Canada
One thing I've learned throughout my years is that PC guys and Car guys are the exact same but, different. Same jokes, same sticker memes. Love this collaboration and it was about time we got this crossover.
I would have never thought I would see Linus and marty in a car together but it's the best thing ever
The collab I never expected in my lifetime. Being both into cars and in IT, this is like parallel Universes merging into each other.
Love this. Two of my favorite channels together in a collab. Great work!
would never guessed that your channels would ever do a colab ever, but really enjoyed it, you really should do that again sometime
Fun fact about this green crow bar @ 9:37 it's from some Nvidia launch and it was in background of wan show for years as show piece before they started use it as a crowbar.
This is the crossover i didnt know i needed! Love both of these channels deeply. I wish it wasn't so rushed tho, why limit your time so much... Linus has more money than God, he can afford to put you guys up for another week lol
What an epic crossover. Now the world patiently waits for VGG and MCM to work together
That would be awesome!
As number 39 I'm constantly missed out... this collaboration would definitely make up for my hurt feelings 😂🎉 vvg/mcm crx build
A collab with VGG or B is for Build would more than make up for this.
Hey you made it to our west coast. Good on ya! Gearheads are gear heads no matter what side of the road you drive on or what vehicle you drive!
See you work on a car with BC plates warms my cold Canadian heart ❤🇨🇦
Such an unexpected and awesome collab! That was really fun!
So cool my two absolute favourite UA-cam channels doing a colab. Just need Linus over to OZ to do something for the guys
Been watching both channels for at least 10 years now and it's incredible to see them come together!
Thank you guys for the amazing content.
This colab was pretty unexpected JUST LIKE THIS VIDEO'S SPONSOR 🤣
Man this is amazing. 3 of my favorite channels together
The Eurobeat caught me off guard, well played
Well the car does look like it it could be a side characters car in initial D but yeah it was pretty unexpected but welcomed
Mighty Car Mods, Haltech and Vtec Academy deserves a huge thank you and much more gratitude than LTT cares to give. This type of project would have meant the world to many people that never had this opportunity.
I'm so use to seeing Marty stand next to Scott and looking real short. Seeing him net to Linus reminds me that the boys are actually pretty tall.
Linus is also pretty short.
@@joewaun894 Yeah, hes like 5'6". The MCM boys are around 6' to 6'1". Scott has to be atleast 6'5", 6'6".
Scott is gigantic. I'd love to see him next to Linus.
@@iticklechickens I seem to remember Scott saying in a video years ago that he was over 7 feet tall? Thought he said 2.2 metres but I could be wrong.
@@StopDropandLOL 7'8", but those are two separate measurements
Thanks for bringing it back OG school, thanks for a good time and keep up the hard work.
I've been watching both of your channels for years. I'm an IT professional so of course I follow LTT. I daily a shitbox Civic and came across this channel years ago when I had to learn a few things. This collab was something I never thought I needed but was amazing. I have 4 LTT screwdrivers and not once did I ever think about making one into a shifter. Now I need this. I don't have a fancy K series...yet. Might have to figure out a way to do with with my D series shifter. Well done.
that was cool to watch both videos and see it from both perspectives!~ i love yall man! wish i could have been a part of that project
Would loved to have seen speed academy boys join in on this too
That would have been amazing!!!!!