Це відео не доступне.
Перепрошуємо.
2023 Bronco REDARC Tow-Pro Elite - Trailer Brake Controller Wiring
Вставка
- Опубліковано 17 сер 2024
- Making a nice and clean installation of the Redarc Tow-Pro Elite in a 2023 Ford Bronco. Redarc does a really good job of making this look like a factory installation.
We already ran the wiring and installed the receiver and 7 Pin connector in a previous video here: • 2023 Ford Bronco Trail...
Product links:
Redarc Tow-Pro Elite Universal Fit: amzn.to/3KWeu1v
Redarc Tow-Pro Elite Bronco Specific Ford OEM (VM2DZ-2C006-A): ford.oempartso...
Tresalto 12pc Suto Trim Removal Kit: amzn.to/43u1NCi
Pica - Dry Automatic Pencil: amzn.to/3Ks0Rpi
Link to previous receiver hitch wiring harness video: • Ford Bronco Flat Tow W...
Product Links 👇 👇 👇
3/8" Anti Chafe
amzn.to/3ox2J9u
Adhesive Lined Shrink Wrap Kit
amzn.to/3WG2CoQ
Curt 58996 Wiring Harness To Flat Tow Ford Bronco w/o LED Taillights
amzn.to/3SF7usg
Curt 13493 Ford Bronco (Excluding Factory Receiver) Class 3 Trailer Hitch w/ 2in Receiver
amzn.to/3MU3qTI
CURT 56471 4-Pin Trailer Wiring Harness, Fits Select Ford Bronco, Black
amzn.to/3ZgrfZx
Hopkins 48480 Endurance 7-Way Tow Vehicle End Socket
amzn.to/3KQWFkX
Body Panel Clip Removal Tools
amzn.to/41H7g7Q
Was this helpful? Send a Thanks by clicking the ... below the video!
Want me to review your unique fishing, travel or outdoor product? roadandreel.co...
Join this channel to get access to perks and free stuff!
/ @roadandreel
My Fishing Gear:
Shop Ventures Fly Co amzn.to/3nRzwD4
Redington Classic Trout Fly Rod amzn.to/2Sbkues
Redington Zero Reel amzn.to/3xvaIms
Scientific Angler Floating Fly Line amzn.to/3xugogp
Scientific Angler Dacron Fly Line Backing amzn.to/35tvMOd
Rio Fly Line Leaders amzn.to/3cOyn9r
Echo Base Fly Rod Kit amzn.to/3vAH6Cz
Mountainsmith Lumbar Day Pack amzn.to/3iP79Dp
Fly Fishing Landing Net amzn.to/3gHapht
My Trailer Gear:
ADCO Trailer Cover: amzn.to/3jKEuj0
Blackstone 22” Griddle W/Hood & Stand: amzn.to/2WU9CUj
Blackstone Griddle Accessories: amzn.to/3zS9TWd
Trimax Coupler Lock: amzn.to/3DUN9qX
Heavy DUTY Security Cable: amzn.to/3DKqopE
Amazon Masterlock Store: amzn.to/3BPbIUi
00:00 - Intro
00:12 - 2023 Bronco Redarc Tow-Pro Elite Parts List
01:14 - Bronco Brake Controller Harness Location
01:27 - Redarc Controller Knob Ideas - Ford Bronco
02:11 - Removing Lower Dash Panel
04:12 - Removing Bronco Light Switch
04:44 - Installing Redarc Brake Controller Knob In Light Switch Bezel
09:25 - Connecting Redarc Controller Knob
09:39 - Ford Bronco Redarc Brake Controller Mounting Location Below Dash
12:00 - Connecting Redarc Brake Controller To Ford Factory Wiring Harness
12:45 - Running Brake Controller Wire Through Through Bronco Firewall To Redarc Tow-Pro Wiring Harness
14:38 - Splicing Brake Controller Wire Into Redarc Tow-Pro Elite Wiring Harness
15:51 - Redarc Tow-Pro Elite Bronco Installation Final Thoughts
*Disclaimer: This video and description may contain affiliate links where, if you buy an item through the link, I receive a small commission at no additional cost to you. This helps support this channel so I can continue to make more videos like this. Thank you for your support!
This is awesome, thank you! I am getting ready to do my same install.
My question, I assume you disconnected the battery? I have read so much about yes with loose wire connections and no with connectors, I just assume disconnecting the battery is a best practice.
Thanks again!
Yes, disconnect the battery or pull the fuse when wiring. I'm glad this video helped!
@@RoadandReel I just installed per your guidance and AWESOME!!!! Thank you so much!
Nice install demo- enjoyed watching it. I like this placement way better than the center console
Thanks, I'm happy with the placement too. And it worked great on a recent trip!
I’m using your video to install this on my Bronco.
Why did you have to tap into the RedArc harness under the dash with the blue wire?
Your videos are really good. I learn allot.
Thanks.
@@jonyossarian4803 Thanks! We had to run the blue wire because this one didn't have the tow package from the factory. If it would have had the tow package, then there would be a factory harness with that wire already ran to the back.
Did you have to splice into the TPH-007 blue wire because the vehicle did not come with a tow package and/or a 4 and 7 pin connector?
Yes, that's correct.
I followed everything you did and said to a T and it worked perfectly. REDARC and Curt should sponsor you. There isn’t a better video that I’ve seen that covers the installation of both products. Well done! Thank you.
CAUTION!!! DOES NOT FIT AS THEY SHOW
Slick edit @9:39 where you connect the cable to the switch then cut away and don't show that the cable interferes with the panel support! Wish you had been honest and showed that. Then I would have probably mounted in the center console as originally planned.
The only way to make this work is going to be to cut out part of the panel support.
What are you talking about? Pull the panel support off and mount it on the backside like I show. No special edits, you just have to look how everything mounts and you can move it to where it doesn't interfere.
11:47 shows it all go back together.