🛒Buy Direct and Save!: bit.ly/2XLtQPm Buy on Amazon 🛒amzn.to/3qTJ55U Cases and Reviews to consider 🛒Spigen amzn.to/3Imjvwx 🛒UAG amzn.to/3HgS7id 🛒Pitaka: amzn.to/3BQSRtx 🛒WhiteStone Dome Glass Screen Protector: amzn.to/3MeP5Px UK 🛒Spigen amzn.to/3Imjvwx 🛒UAG amzn.to/3HkM900 🛒Pitaka amzn.to/3smjRxM 🛒WhiteStone Dome Glass Screen Protector: amzn.to/35nzaNH Australia 🛒amzn.to/35fmb0R Case Review: Spigen, UAG, Pitaka: ua-cam.com/video/jYH2_G5oLLs/v-deo.html OTTERBOX Case Review: ua-cam.com/video/eeW_j2S4tmg/v-deo.html Poetic, Supcase & VRS Case Review: ua-cam.com/video/B62caJzEK7k/v-deo.html Ringke, Pivet Case Review: ua-cam.com/video/RZUlUr38V1w/v-deo.html
I just wanted to share that my fingerprint scanner did not work all that great after installing this product. You had to press hard, and then maybe 30% chance it would work. The install was visually flawless. No bubbles or other noticeable imperfections. After stumbling on a article, I tried a long shot and baked my screen with uv light for even longer. I went way more than 60 seconds second step curing, but that fixed my fingerprint issue. Even after installing the screen for week. Now it nearly works as naked screen. May work for you as well, especially if you are not out in the sunlight with your phone regularly.
Good tip. I tried something similar. Basically I held down on sensor for 15 to 20 seconds after 15 sec cure. Then cured and while curing the bottom I held down again for first few seconds while light was on. Fingerprint sensor now works pretty much perfect. Quick and I don't even need to press firmly. It's pretty much like the screen protector isn't even really there. Spen and Edge panel Works flawlessly as well
I saw this trick on a different video a few weeks ago and it works. Got a Samsung S22 Ultra (my first "big phone") and saw that the screen protector tech had gone Star Trek on me for some reason (UV curing, waaaaah?) Got this one and the first one was pretty much an unmitigated disaster. Dust bubble, fingers print would not work etc. The instructions in the box were about as useful as a sheet of used toliet paper. Did usethe 2nd one and was much more careful and watched a few vids. Now it's perfect and the FP scanner is more or less perfect.
If you use increased touch sensitivity, you'll be closer to 100%of the time. And pressing firmly on the area of the finger print scanner for 30-45 seconds continually has worked wonders for me on the S10 Plus, S20 ultra, S21 ultra and S22 ultra.
Nice tip! I've had my S22U for a few days now and I put on the WSD right away before using it. I didn't have any issues with installation, and I didn't do the finger press between curing for the fingerprint scanner. I will say my fingerprint scanner works about 90% of the time, which is good enough for me. There are times where it is a little stubborn. If I get annoyed enough with it, I'll redo the installation but for now it's tolerable. The screen protector looks perfect and works perfect otherwise so I really don't want to mess with it. But this is a great tip in case I reinstall it. Thank you!
hello once again, Just to inform you, especially the most skeptical ones, that since yesterday, after installing UI5 (Android 13) the fingerprint works much better with the film, I don't want or need another one, high protection and very, very good quality. Congratulations to whoever provided these instructions, just follow them to the letter. Best regards
Thanks for the great tip! I just installed mine and it was like performing brain surgery. I have 2 dogs and dog hair is always floating around. So I locked myself in the bathroom and proceeded to follow your instructions . Everything went perfectly. Sometimes the fingerprint sensor won't unlock the phone, yet it seems to work 90% of the time in my apps. I just ordered a UAG monarch crimson red case. Hopefully it fits well with the Whitestone dome.
Yes, The Whitestone does work perfectly with UAG line.( including the Monarch) however, The Otterbox Defender is Not compatible, and although the Monarch is rated at 20 ft, it doesn't appear that way. Good luck!
I have Whitestone on my S22 Ultra. It's the best screen protector I've used. Doesn't look like you have one on at all. That said, they do scratch and break somewhat easily. It's good that it protects the rather fragile S22 glass which scratches if you look at it wrong. But, at $25 a pop ($50 per two pack) they're kind of expensive. I'm on my 3rd one now so $75 so far to protect my phone in less than a year time.
I had Spigen EZ Fit on my Galaxy S22+ and it was almost impossible to use fingerprint reader - it worked randomly and it was really annoying. I replaced it with Whitestone Dome glass and pressed firmly fingerprint area after 1st UV round over 10 times and effect is outstanding - fingerprint reader works like a charm :)
I reccomend removing the white felt glue pads before applying UV light to cure, so the UV light reaches the edges fully.😉👍 I have no issues whatsoever with the fingerprint scanner, but I always install the WSD before I ever power on my new device for the 1st time!
Well , not sure about removing felt tabs matter because we are only doing 15 seconds the first time , then 60 seconds after it’s out of jig. So I think it will be fine. One thing that important is pushing phone out of jig with both thumbs at top and bottom at same time.
Good job! My finger print works preaty nice whitout this steps, spigen neo hybrid didnt work whit this glass, the case is to close for a glass and it scratch the glass edge. Du You know what is with UAG monarch cases? Regards for U
Do you have dry or "wet" palm/fingers? I've been using hand moisturiser to get the WSD to work. (I have dry palm/fingers). In a pinch, a quick wipe on the nose helps.
Great info! Also watched Ebp man video- Then I began the process and then screwed up ( no pun intended) opening up the wrong end of glue tube, luckily I was able to keep glue puddle centered on screen, and salvage the whole process to 99.99 % perfection. Followed the extra curing steps, fingerprint pressing after 1st curing and now the fingerprint reader works great. Yikes! almost had a disaster by removing the black cap first! forgot to pay attention to that tiny detail! Using the new UAG Kevlar monarch as my case, Not taking a chance with Otterbox defender and mess up the install. ( edges lifting etc.)( edit-With sensitivity turned up.)
So besides the fingerprint issue with the Wsd glass, is the Whitestone compatible with the Otterbox Defender case? I tried it with the Note 20 ultra, and although it barely fit, any pressure on the outer part of case caused the glass to lift up. Is the AM film compatible without the lifting issue? I can't see how plastic types can help against impacts with the defender. ( currently using the UAG Monarch Kevlar edition. The glass definitely fits, but the poor front lip protection doesn't inspire any confidence . Except maybe side or back drops.
@@TheJabberTech I know, but weight was distributed threw out the screen protector. With the Amfilm glass screen protector it comes with a weight to put only on the fingerprint scanner. Works great.
@@Pandemonium088 maybe it's film. They are mass produced. Your's peeled after 3 to 4 weeks, I've have mine on my note20 ultra for over 5 months. With a poetic spartan case. No peeling, lifting, or stretching. And I change my cases, very often with no problem. Maybe try another one.🙂
whitedome seems to be the best one to use for the s22 ultra. I have never used a tempered glass one before i like the stickers that protects from the glue. Great video that explains. But im so afraid to mess it up even do it so detailed. there is both good and bad rewievs on cracks, bubbles, that fingerprint wont works so i feel confused. what is you all opinions?
I tried the method. Fingerprint scanner worked for the first few hours. Then after the adhesive started drying it would not work. I then went into the settings to redo the fingerprints and for some reason it would only register about 10% of it. I had to remove it. Not sure what I did wrong. Any ideas? When it was done I was so happy it worked.....until it didn't
I installed mine 2 days ago, it was perfect the 1st day. I registered my prints again as instructed. Last night the fp scanner wasn't reading my prints. I registered them again, no difference 🤷♀️
how does this screen protector works with edge panel? i have had put on a tempered glass protector on my previous phones (note 8 and note 20 ultra) and since they have like a kinda curved screen it was giving me problems to open the edge panel. btw. i still have my note 20 ultra Lol
I tried your new method and Whitestone STILL wouldn't work for me, Whitestone said it was my fault. I wasn't about tot spend ANOTHER $50 (for a total of $100 to whitestone) so I got the AM Film Glass and that worked for me
@@bng1336 I used a sharp blade & shaved mine & u can't tell it's been touched at all whatsoever. It only needs a lil bit to come off for it to work. Even with me telling you I done it, u wouldn't be able to tell where. But it sucks to have to do it but it's worth it too
@@bng1336 the piece that snaps on the front of the phone... the inside of the corner. I just did the top 2 corners & didn't touch the bottom at all. I'm actually using the case right now & still have the Whitestone Dome on my phone
There's another brand that is made in Germany that I think may be better than Whitestone. It definitely spills less glue out the sides. I'll provide the link to anyone interested.
🛒Buy Direct and Save!: bit.ly/2XLtQPm
Buy on Amazon
🛒amzn.to/3qTJ55U
Cases and Reviews to consider
🛒Spigen amzn.to/3Imjvwx
🛒UAG amzn.to/3HgS7id
🛒Pitaka: amzn.to/3BQSRtx
🛒WhiteStone Dome Glass Screen Protector: amzn.to/3MeP5Px
UK
🛒Spigen amzn.to/3Imjvwx
🛒UAG amzn.to/3HkM900
🛒Pitaka amzn.to/3smjRxM
🛒WhiteStone Dome Glass Screen Protector: amzn.to/35nzaNH
Australia
🛒amzn.to/35fmb0R
Case Review:
Spigen, UAG, Pitaka: ua-cam.com/video/jYH2_G5oLLs/v-deo.html
OTTERBOX Case Review: ua-cam.com/video/eeW_j2S4tmg/v-deo.html
Poetic, Supcase & VRS Case Review: ua-cam.com/video/B62caJzEK7k/v-deo.html
Ringke, Pivet Case Review: ua-cam.com/video/RZUlUr38V1w/v-deo.html
I just wanted to share that my fingerprint scanner did not work all that great after installing this product. You had to press hard, and then maybe 30% chance it would work. The install was visually flawless. No bubbles or other noticeable imperfections. After stumbling on a article, I tried a long shot and baked my screen with uv light for even longer. I went way more than 60 seconds second step curing, but that fixed my fingerprint issue. Even after installing the screen for week. Now it nearly works as naked screen. May work for you as well, especially if you are not out in the sunlight with your phone regularly.
Good tip. I tried something similar. Basically I held down on sensor for 15 to 20 seconds after 15 sec cure. Then cured and while curing the bottom I held down again for first few seconds while light was on. Fingerprint sensor now works pretty much perfect. Quick and I don't even need to press firmly. It's pretty much like the screen protector isn't even really there. Spen and Edge panel Works flawlessly as well
I saw this trick on a different video a few weeks ago and it works.
Got a Samsung S22 Ultra (my first "big phone") and saw that the screen protector tech had gone Star Trek on me for some reason (UV curing, waaaaah?)
Got this one and the first one was pretty much an unmitigated disaster. Dust bubble, fingers print would not work etc. The instructions in the box were about as useful as a sheet of used toliet paper.
Did usethe 2nd one and was much more careful and watched a few vids. Now it's perfect and the FP scanner is more or less perfect.
If you use increased touch sensitivity, you'll be closer to 100%of the time.
And pressing firmly on the area of the finger print scanner for 30-45 seconds continually has worked wonders for me on the S10 Plus, S20 ultra, S21 ultra and S22 ultra.
Nice tip! I've had my S22U for a few days now and I put on the WSD right away before using it. I didn't have any issues with installation, and I didn't do the finger press between curing for the fingerprint scanner. I will say my fingerprint scanner works about 90% of the time, which is good enough for me. There are times where it is a little stubborn. If I get annoyed enough with it, I'll redo the installation but for now it's tolerable. The screen protector looks perfect and works perfect otherwise so I really don't want to mess with it. But this is a great tip in case I reinstall it. Thank you!
You can leave it over here. I’ll only ride it when it’s raining 🌧 l
@@bgredz1 huh?
@@WreckedBrewery lol, disregard. I was sending a text and it got mixed up with with the comments on this UA-cam video 😂🤣
Worked wonderfully for me. Finger print scanner and all. Thanks!
Glad it helped
hello once again,
Just to inform you, especially the most skeptical ones, that since yesterday, after installing UI5 (Android 13) the fingerprint works much better with the film, I don't want or need another one, high protection and very, very good quality.
Congratulations to whoever provided these instructions, just follow them to the letter.
Best regards
Thanks for the great tip! I just installed mine and it was like performing brain surgery. I have 2 dogs and dog hair is always floating around. So I locked myself in the bathroom and proceeded to follow your instructions . Everything went perfectly. Sometimes the fingerprint sensor won't unlock the phone, yet it seems to work 90% of the time in my apps. I just ordered a UAG monarch crimson red case. Hopefully it fits well with the Whitestone dome.
Glad to help!
Yes, The Whitestone does work perfectly with UAG line.( including the Monarch) however, The Otterbox Defender is Not compatible, and although the Monarch is rated at 20 ft, it doesn't appear that way. Good luck!
Hello,
Great demonstration, I did exactly as you said and it worked perfectly, everything works and the aspect is remarkable. Thank you for your help.
Glad to help!
Thanks for nice video,I installed it in my s22 ultra 1 year back.No issue yet, everything going on smoothly.Should i replace it now
Hi! I want to ask does the phone holder or car holder lift the tempered glass when using it without a phone case?
I have Whitestone on my S22 Ultra. It's the best screen protector I've used. Doesn't look like you have one on at all. That said, they do scratch and break somewhat easily. It's good that it protects the rather fragile S22 glass which scratches if you look at it wrong. But, at $25 a pop ($50 per two pack) they're kind of expensive. I'm on my 3rd one now so $75 so far to protect my phone in less than a year time.
I had Spigen EZ Fit on my Galaxy S22+ and it was almost impossible to use fingerprint reader - it worked randomly and it was really annoying. I replaced it with Whitestone Dome glass and pressed firmly fingerprint area after 1st UV round over 10 times and effect is outstanding - fingerprint reader works like a charm :)
I reccomend removing the white felt glue pads before applying UV light to cure, so the UV light reaches the edges fully.😉👍 I have no issues whatsoever with the fingerprint scanner, but I always install the WSD before I ever power on my new device for the 1st time!
Well , not sure about removing felt tabs matter because we are only doing 15 seconds the first time , then 60 seconds after it’s out of jig. So I think it will be fine. One thing that important is pushing phone out of jig with both thumbs at top and bottom at same time.
Great video. I saw some comments elsewhere say the WSD is "bad" with the s pen. The feel is just not right. What do you think?
No issues with everyday usage but maybe if you draw with it 🤷🏻♂️
I have not seen any difference whatsoever. Behaves like there is no screen protector at all.
Good job! My finger print works preaty nice whitout this steps, spigen neo hybrid didnt work whit this glass, the case is to close for a glass and it scratch the glass edge. Du You know what is with UAG monarch cases? Regards for U
Thanks, the installation was flawless!
Awesome 👍
Do you have a list of cases that compatible with this screen protector? Thank you for you vdo.
Yes I do ua-cam.com/video/juGYoYWpgjs/v-deo.html
Thank you for the follow-up! 👍
Had to!
Thx for the video, my WSD is on its way, fingers crossed for an easy installation 🤞
Followed your instructions...perfect install fingerprint scanner works flawless thx
Thank you. You've made up my mind!
Do you have dry or "wet" palm/fingers? I've been using hand moisturiser to get the WSD to work. (I have dry palm/fingers). In a pinch, a quick wipe on the nose helps.
installed it again, made a video too,..all is ok now.works great without lubing up
Are you supposed to buy that uv light separately?? Mine definitely didn't come with that
Comes with it. You probably bought the wrong one
Great info! Also watched Ebp man video- Then I began the process and then screwed up ( no pun intended) opening up the wrong end of glue tube, luckily I was able to keep glue puddle centered on screen, and salvage the whole process to 99.99 % perfection. Followed the extra curing steps, fingerprint pressing after 1st curing and now the fingerprint reader works great. Yikes! almost had a disaster by removing the black cap first! forgot to pay attention to that tiny detail! Using the new UAG Kevlar monarch as my case, Not taking a chance with Otterbox defender and mess up the install. ( edges lifting etc.)( edit-With sensitivity turned up.)
Will this screen protector work with the speck grip case
Hi, does it have any sort of oleo-phobic coating on it, after you applied it looked awful, full of fingerprints...
Yes it does
This silver color back looks great
THANKS FOR THE VID... REALLY HELPED
Awesome 😎
So besides the fingerprint issue with the Wsd glass, is the Whitestone compatible with the Otterbox Defender case? I tried it with the Note 20 ultra, and although it barely fit, any pressure on the outer part of case caused the glass to lift up. Is the AM film compatible without the lifting issue? I can't see how plastic types can help against impacts with the defender. ( currently using the UAG Monarch Kevlar edition. The glass definitely fits, but the poor front lip protection doesn't inspire any confidence . Except maybe side or back drops.
Great content. You could have put a weight on it, or a couple of quarters. But I'll still stick with the Amfilm elastic skin screen protector.
I used the weight provided
@@TheJabberTech I know, but weight was distributed threw out the screen protector. With the Amfilm glass screen protector it comes with a weight to put only on the fingerprint scanner. Works great.
Next device I'll try am glass,this is perfect now
The amFilm.TPU shrinks after 3-4weeks :(
@@Pandemonium088 maybe it's film. They are mass produced. Your's peeled after 3 to 4 weeks, I've have mine on my note20 ultra for over 5 months. With a poetic spartan case. No peeling, lifting, or stretching. And I change my cases, very often with no problem. Maybe try another one.🙂
Thanks for the review!
where did you get your home screen lion wallpaper from
The Internet
@@TheJabberTech what's it called can you send link.?
Called lion..no link bruh
@@TheJabberTech I put in lion bruh couldn't find it can you send direct link
Bruh, i don't keep links for wallpapers
whitedome seems to be the best one to use for the s22 ultra. I have never used a tempered glass one before i like the stickers that protects from the glue. Great video that explains. But im so afraid to mess it up even do it so detailed. there is both good and bad rewievs on cracks, bubbles, that fingerprint wont works so i feel confused. what is you all opinions?
Thank you for this video.
How was your experience with the Spen with the whitestone dome?
It behaves as if there is no screen protector at all. Whitestone dome is the gold standard in my opinion.
I tried the method. Fingerprint scanner worked for the first few hours. Then after the adhesive started drying it would not work. I then went into the settings to redo the fingerprints and for some reason it would only register about 10% of it. I had to remove it. Not sure what I did wrong. Any ideas? When it was done I was so happy it worked.....until it didn't
I installed mine 2 days ago, it was perfect the 1st day. I registered my prints again as instructed. Last night the fp scanner wasn't reading my prints. I registered them again, no difference 🤷♀️
Did u increase sensitivity settings
@@TheJabberTech yes
how does this screen protector works with edge panel? i have had put on a tempered glass protector on my previous phones (note 8 and note 20 ultra) and since they have like a kinda curved screen it was giving me problems to open the edge panel. btw. i still have my note 20 ultra Lol
My finger doesn't catch the edge of the glass when using gestures (think thats your Q)
Sucks they don't have any for the s21ultra. I would buy if they did to put over my liquid glass application I have already
I tried your new method and Whitestone STILL wouldn't work for me, Whitestone said it was my fault. I wasn't about tot spend ANOTHER $50 (for a total of $100 to whitestone) so I got the AM Film Glass and that worked for me
I love this screen protector but it does not play nicely with the Supcase. So TPU film it is, but with this lip action Jackson, I'm good to go
Supcase is not compatible! I did a vid on case compatibility ua-cam.com/video/juGYoYWpgjs/v-deo.html
@@TheJabberTech I learned the hard way, just 1 protector tho. Some say ith a Dremel or sandpaper it can work but I ain't about that life
@@bng1336 I used a sharp blade & shaved mine & u can't tell it's been touched at all whatsoever. It only needs a lil bit to come off for it to work. Even with me telling you I done it, u wouldn't be able to tell where. But it sucks to have to do it but it's worth it too
@@BJPerryJr but like which part?
@@bng1336 the piece that snaps on the front of the phone... the inside of the corner. I just did the top 2 corners & didn't touch the bottom at all. I'm actually using the case right now & still have the Whitestone Dome on my phone
I throwed mine after try one then see your last video .. I will try with the secind one 😤
yes, try it again!
Can I install a screen sticker other than this?
Install whatever you want 😉
2:35 inserting phone
Excellent
Thank you! Cheers!
There's another brand that is made in Germany that I think may be better than Whitestone. It definitely spills less glue out the sides. I'll provide the link to anyone interested.
Im interested
Wallpaper link
Check comments
@@TheJabberTech couldn't find it in walli
That's where I found it 🤷
You have to cure it 4x 60s not just 2x
This is a complete engineering bro
Honestly, the glass on the S22 is so strong these days don’t really need a protector anymore
It's more to protect from micro scratches
Installation was stressful
But worth it 👀
You sound like you're from 18th Ave
I got a tube of UV screen protector glue and did it by hand because your fancy tools don't exist
a screen replacement is esser than this nonsense
This is bs... I have tried this _New installation_... Better but still horrible.