How to add external Power amplifier to AVR - Upgrade to Separates - connecting SR 6014 & MM7055
Вставка
- Опубліковано 22 сер 2024
- Follow on Instagram to get early updates on upcoming videos, (New)
/ hometheaterenthusiast
How to add external Power amplifier to AVR - Upgrade to Separates - connecting SR 6014 & MM7055
How to connect AVR with Power Amp ?
What are the advantages of using separates ?
What is an AVR ?
What is a power amp ?
Marantz SR 6014
• Marantz SR 6014, 9.2 ...
Marantz MM 7055
• Marantz MM 7055 - 5 Ch...
============================================================================
My Previous videos
My Home Theater Tour
• My Home theater Tour -...
Speaker Reviews,
B&W 802 D2 - Tweeter Replacement - • B&W 802 D2 🤩 - How del...
Revel Concerta2 F36 & QAcoustics 3050i - • Revel Concerta2 F36 - ...
SVS Ultra Centre, Center channel speaker - • SVS Ultra Center - Fla...
SVS Prime Elevation Speaker - • SVS Prime Elevation Sp...
Klipsch RP504c vs Monitor Audio Bronze center, Upgrade - • Monitor Audio Bronze C...
Monitor Audio Bronze6, Floor standing speaker - • Monitor Audio Bronze 6...
Pioneer SP FS52, Floor standing Speaker - • Pioneer SP-FS52, Best ...
Klipsch RP 504c Center channel speaker - • Klipsch RP-504C Refere...
Subwoofers,
SVS SB16 Ultra Subwoofer - • SVS SB 16 Ultra - 16" ...
SVS SB1000 Subwoofer - • SVS SB 1000 Subwoofer ...
SVS Soundpath Isolation System - • SVS Soundpath Subwoofe...
Power amplifiers and AVR
Emotiva XPA3, power amplifier - • Emotiva XPA-3 Full Rev...
Emotiva BasX A7 - Power amplifier - • Emotiva BasX A7 Power ...
Emotiva BasX 800 - • Emotiva BasX 800 - Bes...
Marantz AV7705, AV processor - • Marantz AV7705 - 11.2 ...
Marantz MM 7055, Power amplifier - • Marantz MM 7055 - 5 Ch...
Marantz SR 6014, AVR - • Marantz SR 6014, 9.2 ...
Projectors,
Mijia 4K UST Projector from MI (Xiaomi) - • Xiaomi Mi 4K UST laser...
Pros and cons of UST Projectors - • Pros and Cons of Ultra...
Other,
Stream 4K Atmos, DTS-X anywhere in your home Netwok using a Dedicated NAS - • Stream 4K Atmos, DTS-X...
Best connectivity between your TV and Audio equipment's - • How to Connect your TV...
DIY Hometheater Acoustics - • Acoustic Treatment-How...
How to connect AVR with Power amplifier - • How to add external Po...
How to use Banana Plugs for speaker connection - • AmazonBasics Deadbolt ...
Apple TV 4K, 5th Generation Apple TV - • Apple TV 4K - 5th Gene...
============================================================================
=========================================================================
Consider purchasing from my Amazon Affiliate links below, I earn small commission for qualified purchases without costing anything extra to you. Thank you
=========================================================================
Accessories Purchase Link India,
1. HDMI 2.1 Cable, 4K/120Hz, 8K/60Hz, Dolby Vision and HDR 10, 48Gbps
2 meter,
Belkin (INR 8000/-): amzn.to/3fxafbW
Dhivis (INR 3200/-): amzn.to/2T2aaFu
10 meter fiber HDMI 2.1,
Dhivis (INR 15999/-): amzn.to/3yy8Fz6
15 meter fiber HDMI 2.1,
Dhivis (INR 16999/-): amzn.to/3u5YNsV
2. RCA Interconnect Cables,
CABLESETC 5ft: amzn.to/3vdf94m
3. Banana Plugs
AmazonBasics Speaker Connector Banana Plugs - 12 pairs: amzn.to/2QDt8S8
Amazon India Purchase Link;
AmazonBasics 4-Feet Digital Audio Coaxial Cable: amzn.to/3bITnxH
If its not available Try below cables, both are 2RCA-TO-2RCA-6FT
BlueRigger Dual Shielded RCA Cable : amzn.to/3bHiX6k
CableCreation RCA Cable,6ft 2RCA Male to 2RCA : amzn.to/3ozzCxI
USA
www.amazon.com...
Music: www.bensound.com
*********************************************************************************
For product discounts on AV Equipment purchases in India Send Enquiries @ hometheater.enthusiast.87@gmail.com
*********************************************************************************
#Separates
#Preprocessor
#AV processor
#Pre amp
#pre out
#Power amp
#Marantz SR 6014
#Marantz MM 7055
#How to connect AVR to Power Amp
Yea, you were the only one that was able to explain this properly..
Thank you 😊
I was looking for a detailed but easy to understand video showing how to hook up an external amplifier to an avr with pre-outs. I found a number of videos but they weren't detailed enough and easy to understand. Your vid fit both criteria for me. So, I've subscribed to your channel and appreciate the help. Take care.
Thank you brother 😊
I am impressed, you are very clear in your communication. Am about to connect a XPA-11 Gen3 11 Channel Audiophile Home Theater Power Amplifier to a Onkyo TX-RZ820. Will let you know how it goes when done.
Wow XPA 11😍😍 enjoy
@@HometheaterEnthusiast Thanks buddy.
I recommend zooming in with the camera to the location of the Pre-amps when the cable connection was made.
Sorry for the inconvenience, Thanks for your suggestion.
Hai sir your videos explain very good I am Big fan of your videos super
Good to hear 😊 thank you.
Thank you for the detailed explanation and especially the demonstrative video with the practical side of what is happening. I have often searched the internet for a video where someone also shows how this connection works, and must also confirm how someone in the comments already mentioned that you are the only one who shows and explains it so well!! Compliment a very nice and understandable video! Now I know how to do it and what I need for it. I have one last question, is the remote control connected to you at all? Do you then use the AVR remote control to switch both devices on and off and also operate them?
Hey thanks a lot for your kind words,
Regarding ur question what u need to do is connect trigger cable from avr trigger out to amp trigger in then when u switch on ur avr the power amp automatically gets ON. Thats how I did the same. Hope you understand.
Checkout this video I have explained how to connect the trigger cable in this video.
ua-cam.com/video/kV7yEddbXSU/v-deo.html
@@HometheaterEnthusiast Thank you very much for the quick reply and also for the link to the video where the trigger cable connection is explained. Your suggestions are really valuable!! Have a nice evening!! Will subscribe to your channel right away👌👍
Nice video...did you notice a difference in sound quality by using the 7055 as an amp. Vs just using the 6014?
Ys ofcourse its more refined more dynamic more powerful also depends on the speakers too,
Nice explanation
Thank you 😊
Hello Bro. Your video explain so clear and would like to know are you using the individual coaxial cable to connect receiver to amplifier? I’m using RCA cable red and black color to connect my receiver and amplifier I don’t know it was correct or not . I really need your help about this issue. I hope to hear from you soon. Thank You very much.
I was using individual rca cables, I will suggest to use the same with a decent quality.
Can you tell me what’s kind of cable you used in the video to connect from receiver to amplifier. Thank You.
I have explained it in the video, its a amazon basic coaxial rca cable its good.
Denon 6700 with extra 2 front wide channels connected with the marantz mm7025
Now the speaker wire is to be connected with one which one to get best output
In the amp assign section u have to select the mode of assignment of ur speakers, then mostly the avr/processor itself will guide u the channels to use for ur wide speakers, its all depends on ur avr model,
Generally there will be some assignable channels (mostly height channels )u should have to use tat in this case.
Hi thank you for this really enjoyed your video. Why did you only connect one rca to Centre and one to the amplifier. Where as the others had both the red and white connection? Thanks
Hi glad to know u enjoyed the video😊
I think u got confused a bit. RCAs are not speaker level so there should be only one rca cable for one channel (speaker). Also here red and white doesn’t make any sense u can consider red is for right speaker and white for left. Here all the rca preouts are for a dedicated channel which mean to a dedicated speaker may be left or right or center . So we need only one rca connection to the center channel too.
Hope u understood, pls let me know if u need more clarification, glad to support 😊
@@HometheaterEnthusiast Do you need to use 2rca male to 2rca male cable for 2 channel power amp or separate RCA cables for each channel?
@@deepanbanerjee6736 both should work👍🏼
how to connect for Marantz 7025 and what is unbalanced switch and balanced switch if using an XLR connector?
U can follow the same procedure, balanced means xlr, other is rca
Good morning I have one question! The EQ Settings and audio settings such as dynamic eq or audio profile “flat , reference “ from pre-amp it pass to the external amp ? Or the external amp play an pure sound ?
Do any method because my denom avr s750 h have only 2 pre out but no connection for front left surround to connect an extra amplifier.so how can I connect an extra amplifier ?can you please tell me
Those avrs don’t have all the preouts bro, u need to upgrade.
Sir I want to buy 7 channel power amplifier marantz mm8077 or Emotiva xpa Wich one best please give good suggestions I confused Wich one best
Both are at different price range xpa 7 will be much powerful than 8077. If u have budget I will suggest go ahead with xpa7.
Sir I read from forum that xlr do not have advantage over rca within a short distance? Is that true? I want to buy cable now am confused whether to buy a amazon basic rca cable or xlr cqble
If u have xlr connectivity available I will suggest go with xlr. In my experience it definitely make difference theoretically it may be made for longer run noise reduction though.
What is trigger wire connection seen in some videos. For marantz sr 7011 it is not seen.
Trigger cables usually comes with the power amplifiers, it is used to auto turn on the connected devices.
Sir superb. One doubt woofer wire? Please answer for me. Thanks.
Speaker wire should connect from the power amp not from the AVR.
Thanks for your response and support.
But still I am not clear. Speaker wires are connect to amp.ok woofer wire connect to direct avr or power amplifier iam not understand.😀😀😀
@@ayyaswamyloganathan1778 okey u mean subwoofer. Subwoofer is connected at the preout of AVR/Processor directly, not the power amp.
Can we not use power amplifier directly with speakers, without any pre-amp connection? Does it always have to travel from pre-amp to power amp to listen to music or 5 channel?
I didn’t understand the question correctly, but if u are asking whether we can connect power amp to speaker without using preamp, I would say we can connect but how u will play the content u dont need a pre processor or avr specifically u can directly connect you phone output to power amp and play the music u just need one converter to rca from phone. Sorry if I didn’t understand your question correctly.
@@HometheaterEnthusiast ya that's exactly my question, if I only invest in power amp and speakers, can I play music?
@@vgnow6558 yes u can, u can use tour phone as pre amp 👍🏼
Great video, i have one question. I have pioneer receiver and an onkyo receiver, can i use onkyo reciver as a power amp?
Well, it depends on ur avr, if one of ur avr has rca audio input then u can connect the other avr preout to this particular avr. But again the usecase is very limited
Hi, I gave onkyo rz 830 for this which power amplifier is better? Can you suggest
Usually people won’t think of match with an avr while selecting a power amp, I will suggest you go ahead with emotiva or Marantz or even yamaha whichever is suitable for your budget and power need.
Sir,
Can I go for Parasound? for the Onkyo RZ 830
@@praveenkumaralex3026 of course u can.
Great video i am a Marantz SVR 7015 owner a fanstatic AVR but i want that much more power as my room is big so i was looking at a mm7055 ,to push the front 5 at 140 per channel and the avr to handle the other 4 channels heights etc ,,,,,
That will be always better than ur current setup 👍🏼
@@HometheaterEnthusiast i am looking to order the MM7055 JUST worried with the delay in deliveries ,, but for sure the difference in power will change the game for home cinema and music
@@michaelpolydorou5678 its a worth wait 😊
@@HometheaterEnthusiast THANK YOU ,,,For your time and advice .....
@@HometheaterEnthusiast can I ask you a question if we say that mm7055 has 5 x 140 Watts, this means each channel is on the amp is getting 140 , not 5 channels sharing the total of 5x 140 I ask as I wish to be clear each speaker will get 140 Watts
Would it make a difference if I use a DJ power amp from Rockville or Behringer instead of emotiva, outlaw monolith etc. The price difference is huge. Pls explain if it even matters.
Frankly saying I’m not sure. If u have an option pls check this and share ur experience here, much appreciated 👍🏼
So i just bought a marantz sr6015 should i add an amp to my speakers. I have some martin longan motion 40s
Yes you can 👍🏼 amp model you can choose depends on your power need
Would it make a big difference
What would you recommend marantz or emotiva
@@adrianbucio3650 it depends on your speakers. which one u use
Wich brand is very good amplifier
There are lots of good brands u can select from them, with respect to ur budget and requirements. Marantz and emotiva are 2 popular brands in india
Nice explanation! Im currently using marantz sr8015 and I wanna get separate amp. Is there big difference in sound with amp?
Yes of course there is. But all these things depends on ur speakers as well.
I have the same question. I have the sr8015 and just bought the 7055 amp. Im running all martin logan speakers. 60xt . 50xt. Atmos sfx. Motion 40s. They sound really good with just the sr8015. So when it arrives I’ll hook it up and let you know how it soinds.
@@adrianbucio3650 awesome i also got monolith x7 running with my sr8015 and its sounds fantastic. Even without amp it has plenty of power but amp takes it to the next level.
@@gamingingalaxy4011 quick question on the Audyssey im just trying to set up left right and center on the external amp how do i do that. And the rest of the channels are gonna be running on the avr
@@adrianbucio3650 im running everything on pre amp mode. I believe you just leave all 13 channels on and thats it. Just plug 3 channels thru amp rest thru receiver and rerun audyssey
can you connect rca to xlr from avr to power amplifier?
You can connect by using a proper rca to xlr cable it should work. But that doesn’t give you the advantages of balanced signals. As I explained in the video there are 2 signals in xlr cables out of which only one will be used if u r using an xlr to rca cable. So rca to xlr will just give u the same outcome of rca to rca. Hope u understood 😊
Hi there, is it better to run speaker wires from power amplifier or an AV receiver when the AV receiver and the power amplifier were connected together?
Well, the basic motive behind using a power amp is to drive ur speakers with better quality & power so always use that if u have a power amp.
@@HometheaterEnthusiast Thank you so much for your quick response.
Once the connections are made, any changes to do in the AVR speaker set-up?
U have to specify ur configuration in amp assign option, like 5.2.2 or 7.2.4 etc and do the calibration. Rest of the things will be taken care by the calibration 👍🏼
Do I need to change amp assign settings?
Not necessarily, if u have the proper assign mode selected already just do an Audyssey calibration.
@@HometheaterEnthusiast Thanks. Much appreciated
Great video
Thank you 😊
Hai brother I am using Marantz SR 8012 AVR can I use these power amplifier to my AVR?
Yes of course, u can.
Sir can I attached the denon avrx1400h emotiva basx7
No u can’t, since there is no pre outs available on the AVR, I think u need atleast 3000 series model
@@HometheaterEnthusiast thanks very much sir
Hi can i buy any power amp, is there any difference? I am looking into crown amp. But does different brand of amp make any difference to the sound?
Yes amps make difference in audio quality, also different brands use different technology that too will affect the sound profile
@@HometheaterEnthusiast thanks for replying bro. What are your views on Crown amplifier.
i am a little bit confused for my home theater set up i have 9.2.6 speakers configuration .my receiver denon avr x6500h 11.2 channal my amplifier monoprice 7x200w onkyo pa-mc5500 9x150w Audio source Amp 210 my blu ray oppo 203 my question all togeather to play which one better to buy marantz av 8005 or denon avr x8500h 15 channal or Anthem avm 70.Thank you.
First of all u need to decide whether u want a 13 channel or 15 channel configuration, this depends on ur room size as well. since u have very powerful power amp available I will recommend to go for a processor like 8805 other than avr.
@@HometheaterEnthusiast Thank you so much
Hai bro, എന്റെ avr denon 4700 ആണ്.. അത് 9.2 ആണല്ലോ. അത് 11.2 ആക്കാൻ വേണ്ടി ഞാൻ pre out ഇൽ നിന്ന് കണക്ഷൻ എടുക്കുമ്പോൾ front channel അല്ലെങ്കിൽ rear height chanel ഇൽ മാത്രം കൊടുക്കാനുള്ള ഓപ്ഷൻ മാത്രമേ കാണിക്കുന്നുള്ളു.. എനിക്ക് pre out കണക്ഷൻ കൊടുക്കേണ്ടത് top front or top middle ആണ്... എന്തുകൊണ്ടാണ് ഇങ്ങിനെ.. ദയവായി പറഞ്ഞു തരുമോ
Hi brother, Actually I don’t remember the denon setup 😞 but as u said if it’s providing option for front and back, it may be front and back hight speakers because there is 2 main reason u go for an external amp,
1. To increase the number of channels
2. To power ur speaker with a more powerful external amp
The brand provided both the options for u because if ur need is reason 2 then u should power the front speakers for better performance, if it’s option 1 that is ur case then just power the back hight because it doesn’t make much difference in performance.
Now the case is u need a different type of configuration like top speakers then my suggestion is try out if it takes automatically by Audyssey.
If u need more flexibility in external amplification u should use a pre amp other than AVR.
I know it may not help you but just some suggestions. 😊
Hi I Just purchased this MM7705 amp and I have RCA cables to hook up from my AVR to the amp I have the RCA cables with one red and one white on one end and one white and one red on the other end
can I use these , or do I have to use one individual cable per channel if you can give me any help I would greatly appreciate it
Hi brother, u can use that cables it should work. Forget about the colours👍🏼
Would definitely recommend better RCA cables with that kind of equipment
It doesn’t make much difference bro 😊
Great video thanks, is it possible to power for example, front left and front right with the amp, but power the centre speaker with the AVR processor at the same time?
I understand there will be different connections involved, but with it being a 5 channel amp only, if I wanted to get say Dolby Atmos speakers on a later date, would I be able to power the new Atmos speakers through the AVR and the older 5.0 speakers through the amp at the same time without any problems?
U can power any 5 channels through the power amp and remaining from ur avr that doesn’t make any issues, its normal.
Go ahead..👍🏼enjoy 😊
@@HometheaterEnthusiast Great thanks for the quick response!
What size banana plugs did you use?
Im using Amazon basics deadbolt type banana plug
ua-cam.com/video/h_cgiEqnWdo/v-deo.html
Hi, thanks for your good explanation. I have a doubt regarding my current set up and the new AVR I am planning to buy.
I currently have two HT setup (Sony & Philips). While I will certainly discard one, I am thinking of using the other one as a "pre-out - zone 2" connection with either a Yamaha or Denon AVR. Can you please help me to understand if the new AVR will be able to send out digital sound to my old HT set up through the RCA cable from Zone2 preout?
Yes, only if both the AVR has the support.
Your new avr should have a multi zone feature and the old avr which receives the input should have rca input option.
@@HometheaterEnthusiast Thanks. Yes, my old HT has RCA input. My only doubt was whether the multi zone feature in the new AVRs send out digital audio signal.
Show channel set with amplifiers
Show channel assignment in avr and amplifiers
Will do it next time 👍🏼
@@HometheaterEnthusiast explain need of triggerouy
U r from Kerala?
Yes brother.
Bro i need ur number
ഞാൻ ഒരു processor വാങ്ങാൻ വേണ്ടി നോക്കുവാ ഒരുപാട് Google ചെയ്തു നോക്കി കാരണം av processor ano അതോ av receiver ആണോ നല്ലത് എന്ന്.
ഞാൻ main ആയിട്ടു focus ചെയ്യുന്നത് surrounding സിസ്റ്റം ആണ്
Av processor ഇന്റെ processing ങ്ങും av receiver ന്റെ processing തമ്മിൽ എന്താണ് വ്യത്യാസം??????
ഏത് വാകുന്നതാണ് നല്ലത്
If u can just help me bro tkzzzz🙏🙏🙏
@@musammilthaha7660 പ്രോസസ്സർ വാങ്ങുകയാണെങ്കിൽ power amplifier ഉം വാങ്ങേണ്ടിവരും , AVR ആണെങ്കി അതിന്റെ ആവശ്യം ഇല്ല, പ്രോസസ്സർ ന്റെ output ഒരു AVR നേക്കാൾ ക്വാളിറ്റി ഉള്ളതായിരിക്കും, പിന്നെ external power amp ഉള്ളതുകൊണ്ട് you will get the best performance. നല്ല സ്പീക്കർ കൂടെയുണ്ടെങ്കിലേ പ്രോസസ്സർ ഒക്കെ നോക്കേണ്ടതുള്ളൂ, അല്ലെങ്കിൽ നല്ല AVR വാങ്ങിച്ചിട് main speakers ന് അഡിഷണൽ power amp use ചെയ്താലും മതി.
Again everything depends on budget.😊
@@HometheaterEnthusiast bro marantz av8801 enna processor ആണ് വാങ്ങണം എന്ന് വിചാരിക്കുന്നത് i have already 11channel amplifier ഞാൻ ഉപയോഗിക്കുന്നത് bose എന്ന company യുടെ double cube speakers ആണ്
Bro എന്താണ് ഈ av8801 എന്ന processor നെ പറ്റിയുള്ള അഭിപ്രായം
this processer will be suitable for my speakers or not?
@@musammilthaha7660 actually processors don’t need to be suited with ur speakers, its the power amp, since u are already selected av8801 its a good processor but little old, so i will suggest u to go through the specs and confirm if everything is there that you want.
For better quality i will suggest use balanced connections (xlr) from processor to amp, but again it depends on whether ur amp support it.
And regarding the speakers u r using, i’m not familiar with it and i know boss has decent speakers in tiny form factor. But u can always think about upgrading ur speakers in future as well.
So for the time being everything will work fine.👍🏼
Next video turn off the music
Oh sure if you have pre outs, its easy, why would you even need to explain this?
There are still people who don’t know about separates so thought of explaining.
My amp don't look like that lol onkyo A9050
A9050 is an integrated stereo amp, but it has 2 preouts available at the backside u can try it connecting to external power amp for better quality 👍🏼
Hello, I have a question regarding the MM7055 power amplifier, how does this power amplifier perform for listening to music and in stereo mode? Is it more suitable for home cinema or does it work well in both directions?
Honestly I didn’t feel any difference in stereo or multi channel model, it performs well in both condition
@@HometheaterEnthusiastthanks bro for the info!!👍👌 I ordered this power amp yesterday and will get it soon, can't wait until it arrives to hear how my Klipsch speakers sound with it. Will definitely bring my system to a higher level. 🔉🔉🎼🎚🎛
@@PrettyDirtyBoy85 enjoy 😊
@@HometheaterEnthusiast Hello my dear, can I ask you something, I got my power amp and now I want to know what do I have to change in the settings? Should I calibrate the speakers again?
@@PrettyDirtyBoy85 yes u have to re calibrate if u add new power amp.