I was researching cutting some stencils with mylar or similar material on my diode laser when i ran across your video you saved me from buying something i could not use good information Thanks!!!
Cool video. Is the reason that diode lasers can't cut is because you're using white/translucent mylar PET sheets? If you used black sheets would it cut? I know that a lot of diodes says they can cut black acrylic sheets (but not light like white) so i would think black sheets of this would be similar?
It is basically the light passes into and through the material without resistance, I haven't tried but much like acrylic, a solid black piece may be able to be cut.
Hey buddy had a question for ya hey I have an enclosure for my laser an a really good exhust fan but seems like smoke still wants to circulate around in the box an when I shut the lid it slows the exhaust down how can I get it to flow outside more
@TheClackShack I have 1 2inch hole in the front but still seems like it wants to restrict airflow through enclosure,my vent for exhaust is located at the top so should I change location of air inlet or add more holes just don't want the smoke or fumes coming out the inlet holes I drill
Great video. Have you tried it on P2S - i contacted their support and they said it would melt. I design and cut stencils in mylar material 190 micron. Hope you can help me out here
I have cut the material that I have with 3 different.CO2 machines without issue. The P2 and P2S are basically the same machine. I cannot speak for your material, but this works
@ okay :-) thank you so much. I contacted xtool customer service and she Said it would meld. The laser is 55w i Think. But i see that is not the case :-) and when i afsked more questions and linked your video, she stopped anwsering 😂 maybe they don’t want to sell Me a mashine 😅
I have little holes drilled in the front scared to drill more cause don't want smoke to escape through the front instead of up out through the fan any suggestions
As safe as any other material. I do not inhale fumes from any material I engrave or cut. I ventilate all my machines. Mylar has been used with lasers for years.
I have the xtool d1 20 watt NON pro and want to expand and use the extension kit but I'm not sure on finding the cables (it takes 2 power cables). Any help in this area? Thanks.
It's a 4inch 280cfm an sucks good but seems closing the lid it restricted to air flow outside how many holes can a guy put in the front of the enclosure to make it flow better through the fan when lid is closed
Its not about the number of openings, its about the area of the openings. It depends on the actual volume of air being moved, just maintain negative pressure.
I was researching cutting some stencils with mylar or similar material on my diode laser when i ran across your video you saved me from buying something i could not use good information Thanks!!!
Glad it helped
Good to know about this. I love stencils!! Thanks for sharing!! Much ❤ TCS!!
You are so welcome!
Thank you for posting this!!
You bet!
5:55 I've used diluted Elmer's school glue and it works great. People were using Mod Podge but I wanted to try a cheaper method.
Cool
Cool video.
Is the reason that diode lasers can't cut is because you're using white/translucent mylar PET sheets?
If you used black sheets would it cut?
I know that a lot of diodes says they can cut black acrylic sheets (but not light like white) so i would think black sheets of this would be similar?
It is basically the light passes into and through the material without resistance, I haven't tried but much like acrylic, a solid black piece may be able to be cut.
What’s the link to the machine? This video is 🔥
It is a monport M40, I use different machines now.
The little fur ball in the background at the end! 😅
They love to photo bomb me... lol
Hey buddy had a question for ya hey I have an enclosure for my laser an a really good exhust fan but seems like smoke still wants to circulate around in the box an when I shut the lid it slows the exhaust down how can I get it to flow outside more
Add air inlet
@TheClackShack I have 1 2inch hole in the front but still seems like it wants to restrict airflow through enclosure,my vent for exhaust is located at the top so should I change location of air inlet or add more holes just don't want the smoke or fumes coming out the inlet holes I drill
You're gonna need a lil bit larger shack soon! 😂
Past that point.. I am just trying to organize better.. lol
Great video. Have you tried it on P2S - i contacted their support and they said it would melt. I design and cut stencils in mylar material 190 micron.
Hope you can help me out here
I have cut the material that I have with 3 different.CO2 machines without issue. The P2 and P2S are basically the same machine. I cannot speak for your material, but this works
@ okay :-) thank you so much. I contacted xtool customer service and she Said it would meld. The laser is 55w i Think. But i see that is not the case :-) and when i afsked more questions and linked your video, she stopped anwsering 😂 maybe they don’t want to sell Me a mashine 😅
Do you know if the IR laser in the XTool F1 would cut it?
IR beams also struggle on transparent colors. Not as well as a Co2 will.
I have little holes drilled in the front scared to drill more cause don't want smoke to escape through the front instead of up out through the fan any suggestions
You can use smoke from an incent or other means to ensure it is still pulling air in with some velocity. You do not want to over compensate
Thanks for video, is safe to cut this mylar plastic ? Thanks
As safe as any other material. I do not inhale fumes from any material I engrave or cut. I ventilate all my machines. Mylar has been used with lasers for years.
awesome thanks, just checking as I heard some plastics you must not cut. Thanks@@TheClackShack
@@vaughanza this stuff is suppose to be “laser safe” but I would always use caution when burning any product
I have the xtool d1 20 watt NON pro and want to expand and use the extension kit but I'm not sure on finding the cables (it takes 2 power cables). Any help in this area? Thanks.
Unless you can make them, may not be able to find. @Alivepixelcreates may be able to help. He deals with D1 aftermarket parts.
@@TheClackShack Thanks
Hello , can xtool f1 be used
Not likely, this material requires a machine that can cut transparent materials.
When I select cut it limits my MM/s to 20
Must be a controller setting
It's a 4inch 280cfm an sucks good but seems closing the lid it restricted to air flow outside how many holes can a guy put in the front of the enclosure to make it flow better through the fan when lid is closed
Its not about the number of openings, its about the area of the openings. It depends on the actual volume of air being moved, just maintain negative pressure.
@TheClackShack sorry what do you mean keep negative pressure?
How big of holes would you recommend an what about location of inlet holes
Suction@@EtchinAaronslaserworkshop
I wouldnt go much over 75% of the exit in area@@EtchinAaronslaserworkshop
👍🏼👍🏼👍🏼👍🏼👍🏼👌🏼😎
Thanks