The manual states the front suspension should be bounced to allow the right hand fork to to float to its natural position on the wheel spindle before tightening the pinch bolts
FRONT Tire removal tools needed (from just doing this myself): * 6mm hex wrench (allen wrench) to loosen up pinch bolts (just loosen, don’t remove) * 17mm hex (male) to loosen and remove front axel bolt on right (“passenger”) side of front wheel * The spacers will stay in the wheel, but will be loose and could fall out, so keep those aside (where he talks about inspecting them) before moving the wheel to change the tire as they could fall out and get lost
Thanks for the answer mate. Not sure why I cant see it here but I did subscribe to the tech site. I have a few things I wan to do and it has already helped me.
The manual states the front suspension should be bounced to allow the right hand fork to to float to its natural position on the wheel spindle before tightening the pinch bolts
Be aware that the spacers are not the same size! Longer spacer (by 1mm ) goes on the clutch side! Check this with your dealer .
Thanks for your informative videos!!
Thanks, Mike!
Can you put GT Pro Wheels on the rally Pro? I like the color options of the rally Pro but I would be mostly almost always do Road only,thank you
FRONT Tire removal tools needed (from just doing this myself):
* 6mm hex wrench (allen wrench) to loosen up pinch bolts (just loosen, don’t remove)
* 17mm hex (male) to loosen and remove front axel bolt on right (“passenger”) side of front wheel
* The spacers will stay in the wheel, but will be loose and could fall out, so keep those aside (where he talks about inspecting them) before moving the wheel to change the tire as they could fall out and get lost
Good info, thanks. But why not just remove the caliper bolts on one side?
One could, its just not necessary.
@@MikesGarage409until you snap off the abs sensor…why do things the hard way?
Hello. What are the screw tightening torques?
Hey Mike. Thanks for the video. Where do I get the manual with the torque settings from?
Thanks for the answer mate. Not sure why I cant see it here but I did subscribe to the tech site. I have a few things I wan to do and it has already helped me.
Hello. What are the screw tightening torques?