Nice pattern. I just finished making 3 for my nieces. I found it much easier to not attach the top flap until after sewing the front back and bottom together.
Thank you Tony for introducing me to a fun and new hobby. I have purchased two patterns and hardware from your Etsy shop. Your free patterns are appreciated. And yes.....I am a subscriber.
Thanks a lot for the free pattern ! I am a beginner and it's nice to have free pattern because the tools and leather are really expensive when you do not have a lot of money to put in your hobby ^^
As always a beautifully crafted leather piece and video. Thank you for the free pattern. By the way mounting that press to a small board the can be claimed down to the edge of the table make it both moble and very stable for saving space or camera orientation in a work shop
Love these free patterns!!!! Everytime I make one of your patterns I always tell people that they came from you and to check out your videos and work. Keep up the amazing work Tony!!!
Wow, I must say, you put a lot of time and effort into these videos. Great instructions, guessing punching those holes will take a long time. Thanks for everything.
The toggle you make at 18:30 has the punch holes in the wrong place on your pattern. The center holes are 47mm from the left holes and 35mm from the right holes. The bag itself has come out great but I had to re-cut and punch another toggle once I realised the middle holes were not in the center.
Thank you Tony! Great Pattern! I've made 4-5 of yours in the past few weeks and I'm going to make this one this weekend! Thank you for all you do, this is an amazing free gift!
Thanks for another great pattern and video Tony. I sometimes watch videos on my phone, which can be difficult to type on. Right now it looks like 11people have done that and tapped the dislike button by mistake.
I like the hole punch that Tony uses. Where can we get the exact type for our use? I have gone to Amazon and other leather companies, but their punches are not the same. Thanks. Keep up the fantastic work.
What an absolutely adorable bag! It's perfect! Side note: Thanks for the warning about the spare rivets in the hardware kits. I'd be the yahoo wondering where the IKEA I'd gone wrong!
Gathering supplies to make this fun bag! Two questions - what size oval punch do you use for the buckle? Also, are the Amazon leather hollow punches good quality? Do they hold up with many punches? Thanks 😊
One question: does the backpack fit a 21x27 cm tablet? I would like to buy the pattern but I need to know if my daughter's tablet fits, thank you. Ps. Very good job! Grazie
@@Fiskurjoe Hey Joe. The pull tie is in two parts not one continuous part. The holes nearest to where the bag's flap connects to the bag's body should be where each half ends, I simply tied a knot in each of mine so that it couldn't pass through that hole. Starting from the inside of the bag at that hole you then just weave in and out of each of the holes around the bag until your lace reaches the front holes. Hope that makes it clearer.
My first bag I ever made. Easy to do with Tony’s instruction.
This is going to be the perfect bag for my Granddaughter. she will love It!!!
Nice pattern. I just finished making 3 for my nieces. I found it much easier to not attach the top flap until after sewing the front back and bottom together.
Thank you Tony for introducing me to a fun and new hobby. I have purchased two patterns and hardware from your Etsy shop. Your free patterns are appreciated. And yes.....I am a subscriber.
My favorite leather guy on the internet! Thank you Tony!
Thanks so much for the free pattern. I love it when there's a pattern that compels you to make it right away!
Thanks a lot for the free pattern ! I am a beginner and it's nice to have free pattern because the tools and leather are really expensive when you do not have a lot of money to put in your hobby ^^
As always a beautifully crafted leather piece and video. Thank you for the free pattern. By the way mounting that press to a small board the can be claimed down to the edge of the table make it both moble and very stable for saving space or camera orientation in a work shop
#safety
Love these free patterns!!!! Everytime I make one of your patterns I always tell people that they came from you and to check out your videos and work. Keep up the amazing work Tony!!!
Thanks Tony! I find watching you make things very relaxing
Wow, I must say, you put a lot of time and effort into these videos. Great instructions, guessing punching those holes will take a long time. Thanks for everything.
Just got this pattern and looking forward to making the bag, thank you for the great tutorial.
The toggle you make at 18:30 has the punch holes in the wrong place on your pattern. The center holes are 47mm from the left holes and 35mm from the right holes. The bag itself has come out great but I had to re-cut and punch another toggle once I realised the middle holes were not in the center.
Thank you Tony! Great Pattern! I've made 4-5 of yours in the past few weeks and I'm going to make this one this weekend! Thank you for all you do, this is an amazing free gift!
I purchased this pdf its so easy and so pretty. Everything is laid out in the pdf you cant make a mistake on Tonys patterns!
I made this bag last night. I think each of the buckle straps should have a keeper so my next one will include this modification. 👍
Thank you so much. I am going to make one for my sister in law and my mum for Christmas.
Top job as always!
There goes the rest of my day 😁
I see numerous bags for the granddaughters. They will love them.
Me too! they're going to love it.
Cool bag, it will be great for my teenage daughter. Thank you for sharing the free pattern.
I love this design. It’s so adorable. I made 2 bags stay. Thanks 👍👍👍
You are a master Tonny... thanks for all...
Thanks for the video up-load, and PDF down-load. 😊
You make it look so EASY. and thank you for the pattern.
Another great project to add to my list
same here, just need the materials and tools XD (already purchased a plague doctor mask long while ago)
Thank you Tony! You are the best.
Thank you as always Tony. So generous with your hard work! You deserve all the sales and more!
This was such a fun build!
Another great pattern. Looking forward to building this weekend. Thank you Tony!!
You are allways so generous whit us. I love every leather work you do, hope one day be at least half as good you are, Saludos desde Argentina 🇦🇷
Tony, Congratulations on the 90K and thanks for the pattern!
Thanks Tony for yet another free pattern !!!
Thanks Toni for the pattern this is very kind from you.
Very nice work! Contratulations and thank you for sharing! Regards from Argentina
Another great bag. Thank you for your generosity once again!!
Another great video! Thank you for all you do & for sharing.
I have a smaller set of needles for 1mm holes when using 1mm thread. They are more difficult to thread (kinda) but stitching with them is easier.
Much thanks Tony for the pattern.
Cute little bag.
Very nice, as usual, Tony!
I was waiting for this one! Small, good looking, my wife will love it! Thanks Tony!
I made 2 of this pattern. Thank you
Thanks for another great pattern and video Tony. I sometimes watch videos on my phone, which can be difficult to type on. Right now it looks like 11people have done that and tapped the dislike button by mistake.
Got the pattern got the leather, will grab the hardware tomorrow from my local store
I'm going to make this for my daughter
I didn't see how you finished the drawstring straps, were they knotted in the back or sewn to the back? Thanks Sam
Yes!!! Finally next free pattern thank you so much Tony!!!
Adorable little bag! Thank you! I’ve been looking for a similar pattern for a large size bag.
Thank you for another great design.
Thanks for the pattern Tony, It is beautiful
Cute bag! Thanks for the pattern, too. Very much appreciated.
Oh that is so awesome! 😊 I am excited to make one!
wow amazing project. Thank you for sharing this tutorial.
The leather you used for the bag is beautiful. Mind share the name of the leather and where can I buy it?
Tony you the Best! Hello from Russia🖐️
Thank you for the pattern and for all
I like the hole punch that Tony uses. Where can we get the exact type for our use? I have gone to Amazon and other leather companies, but their punches are not the same. Thanks. Keep up the fantastic work.
What an absolutely adorable bag! It's perfect!
Side note: Thanks for the warning about the spare rivets in the hardware kits. I'd be the yahoo wondering where the IKEA I'd gone wrong!
Thank you sir!
Beautiful, Tony, as always. Can't wait to make this one!
Congratulations on the 90K+ Tony, totally awesome and well deserved my friend :)
Tony is the best
Congratulations on the 90k! And thanks for the pattern, a beautiful project, as always.
You are amazing! Thanks for sharing!
Gathering supplies to make this fun bag! Two questions - what size oval punch do you use for the buckle? Also, are the Amazon leather hollow punches good quality? Do they hold up with many punches? Thanks 😊
Thx Tony, I love this new little cute bag ! Good X-Mas gift!
Fantastic! As always. Thank you
love the design
I am first!!! My favorite seller!!!!
Your the best Tony perfect x-mas gift
Thank you Tony, this is amazing!!
Thanks, Tony!
Thank you so much! Im so excited for this bag! I feel like it was designed just for me! 😆
Thank u very much Master only 500+ holes😄😁
Very less in front of Legendry explorer back pack any ways many many thanks for ur generosity sir
The hole punch you have listed doesn't look like the one you used? Did you get a NEW hole punch? I like the look of it. Is there a US link?
If its the 1.5mm punch, I got a really cheap one off amazon uk, it was a 2 pack of small punches for about £2, and worked a treat.
@@clairewelsman1489 it's the punch Tony just covered in his latest video review
What kind of eyelet are the ones you are using? Are they rolled or split backs? Thanks. If you could share a link that would be helpful.
Thanks Tony.
absolutely beautiful!
thanks tony i gladly give you a donation that will make a perfect gift for a friend's daughter
Ur amazing Tony thank u once again
Great video tutorial as usual..just glad it was some hideous ball cap..lol..
One question: does the backpack fit a 21x27 cm tablet? I would like to buy the pattern but I need to know if my daughter's tablet fits, thank you. Ps. Very good job! Grazie
Where did the back of the pull strings attach? did they tie together or get sewn to something?
Wonderful....thank you so much for sharing ...
the buckles you use are different to the ones in your hardware pack for this bag. where can i get some like you used on this bag please?
Thanks Tony!!!!
Merci beaucoup Tony, il est magnifique ! 😍
Is there an option to add shoulder straps like a back pack? My daughter likes to carry bags on her back versus her shoulder on either side. Thanks 😊
Tony, tell us about your new mallet!
And another great, easy to follow pattern.
@Tony, where did you get that awesome punch for your stitches? Did I miss a review video or something?
Great little bag, Tony ! - At 5:30 what are you using for leather balm, please?
ty Tony for share ...
Love the pattern! All your patterns! Do you have a link for purchase to the 1.5mm hole punch you are actually using? Thank you!
Thank you very much. I love you.
Thanks 🙏 soooooo much
Thanks!
ehi Tony
Just wanted to say that this is an amazing project!!
Wait! How do you attach the laces inside the bag? Do you tie them together? Or where do they end?
After the second rivet just tie each lace in a knot, they don't meet in the middle.
@@callumstewart7230 Ooohhh rightrightright. LOL thanks for clearing that up.
@@callumstewart7230 confusing...can you clarify? thanks
@@Fiskurjoe Hey Joe. The pull tie is in two parts not one continuous part. The holes nearest to where the bag's flap connects to the bag's body should be where each half ends, I simply tied a knot in each of mine so that it couldn't pass through that hole. Starting from the inside of the bag at that hole you then just weave in and out of each of the holes around the bag until your lace reaches the front holes. Hope that makes it clearer.
Callum Stewart Perfect. Thank you!
Thank you for this.
Thank you 🌹🌹