Це відео не доступне.
Перепрошуємо.
Carved Brass Viking Beard Beads: How to make your own!
Вставка
- Опубліковано 12 гру 2019
- Making Carved Solid Brass Viking Beard Beads. Making historically inspired Brass viking beads for my beard braids.
🔥DIY PATTERNS: www.etsy.com/c...
🙏PATREON: / drawbridgeprops
POWER TOOLS
► Makita Power File: amzn.to/2qYEX4g
► Makita 9005B 5-Inch Angle Grinder: amzn.to/2OvfPPi
► Bosch Drill and Impact Driver: amzn.to/31wNmhn
► Foredom Rotary Tool: amzn.to/2Khoa5p
► Glue Gun: amzn.to/2KfIXGK
LEATHER WORKING TOOLS
► Wood Burner: amzn.to/2FhDYRW
► Tandy Leather Rotary Punch: amzn.to/2Huh67S
► Hand Sewing Punch: amzn.to/2HquuKd
► Blunt Leather Needles: amzn.to/2T5m78C
► Best Utility Knife: amzn.to/2HrSg4w
► Black Olfa Blades: amzn.to/2HXZsq0
► Jumbo Leather Lacing Needle: amzn.to/2D81vHc
► Leather Slicker: amzn.to/2Vqok0x
► Edge beveler: amzn.to/31NNR5W
► Leather Shears: amzn.to/358RyW2
► Australian Strander (Lace Cutter): amzn.to/2OnMAP3
► Awl: amzn.to/2MbZHjO
► Hole Punch Set: amzn.to/2ogWrvy
METAL WORKING TOOLS
► Cleco Fastener Kit: amzn.to/3aUwIeZ
► Hand held bolt cutter: amzn.to/2I0WGjE
► Adjustable Ruler: amzn.to/2FgCRC4
► Big Profile Gauge: amzn.to/2qZzkmE
► Metal Marking Pen: amzn.to/2JxTQm1
HAMMERS
► Swedish Hammer: amzn.to/2Hru8TJ
► Rounding Hammer: amzn.to/2r0UBft
► Poly Hammer: amzn.to/38SdPYE
► Rawhide Hammer: amzn.to/2WcoMSn
SUPPLIES
► Fiebing’s Leather Dye: amzn.to/2HOXA5b
► Angelus Leather Paint: amzn.to/2UwWr8g
► Jax Metal Darkening Patina: amzn.to/2r1Qikj
► Flitz Metal Polish & Rust Remover: amzn.to/2Z5HhY8
► Armour & Wood Wax Polish: amzn.to/2qYGkzW
► Daubers: amzn.to/30MXUXF
► Urad Cream: amzn.to/2Mi320B
HARDWARE
► Kodiak Lace: amzn.to/2LQ9DAu
► Kangaroo Lace: amzn.to/2IpcFtx
► X-Small Double Cap Rivets: amzn.to/2LS2csN
VIDEO GEAR
► Canon 80D: amzn.to/2HxdGNL
► Canon EF-S 18-135mm: amzn.to/2FhwsXd
► Canon EF 50mm: amzn.to/2UyB5HM
► Canon EF 100mm: amzn.to/2SnOjEG
► Canon EF-S 10-18mm (VLOG Lens): amzn.to/2HuQ6B4
► Joby GorillaPod (Bendy Tripod): amzn.to/2Jq2KSm
► Manfrotto Tripod with Video Head: amzn.to/3bi67tr
► Andoer GVM GP-80QD Slider: amzn.to/2qZtXUo
► RODE VideoMic Pro: amzn.to/2vYqXOn
-- As an Amazon Associate I earn from qualifying purchases --
Subscribe to Drawbridge Props on UA-cam: www.youtube.co...
I today's episode I show off how to make hand carved metal beads with only a few simple tools. The beard beads in this video are inspired by viking pole carvings and made to put a decorative end on a viking style hair braids! Using solid brass rod, I drill the rod and carve a viking face using a foredom and metal polisher. Check out some of my other viking inspired builds like the metal viking comb!
⚔️DRAWBRIDGE PROPS & ARMOURY
🔥PATTERNS: www.etsy.com/c...
🛡️WEBSITE: www.drawbridgep...
🛡️FACEBOOK: / drawbridgeprops
🛡️INSTAGRAM: / drawbridgeprops
🛡️PINTEREST: / drawbridgeprops
🛡️IMDB: www.imdb.com/na...
🛡️TWITTER: / drawbridgeprops
I’m Levi Woods, an Armorsmith and artist working in Vancouver, British Columbia. I love creating new videos to share my shop creations with you. I love all fantasy, medieval and science fiction movies and especially love crafting arms and armour for costumes and props departments. I’ve been building custom armor since 2000 and have worked as a professional movie prop costumer all over the world. When I’m home in my shop I love building art out of wood, metal and leather and love to explore new techniques. I focus on crafting one of a kind extravagant custom projects with including leather and metal armor for my clients who use them for Films, SCA, LARP, Renaissance Festivals, Cosplay, Costume Contests, and Private Collections. As an artist and craftsman, I am inspired and influenced by artisans and crafts people throughout different cultures and history. Join me on my journey of learning and creating as I craft handmade items. “Subscribe now and let’s get over to the bench!”
Levi Woods, Armorsmith
#beard #beads #viking
What should I build next?
Brigandine Jack of Plates!
I think that would be a super interesting build!
Anglo Saxon broken back seax, one of the coolest looking weapons of the Viking era in my opinion.
Some kind of collaboration with me 😎👍
yes we should. Let's talk about what that could be. Send me an email please.
@@DrawbridgeProps Ok, I will send a message now. 😁
Very great job
Thanks!
Great video! Thanks!!!
Glad you liked it!
The braids look good! Better when you leave some beard behind them. The thing with braids though is the longer your beard gets the better they'll be since braiding shortens it up so much and a short braid looks funny. A trick for getting the hair through the bead is to take some string, wrap it around the hair once so there's a loop, then feed the ends of the string through the bead and pull the hair through.
Thanks! Coming from you it means a lot!
@@DrawbridgeProps Want to but the right hair elastic. Any chance you can tell me where and what to buy so I don't buy the wrong thing?
Hey man, my beads keep falling off, you kmow why that is?
@@gprock7222 without seeing or knowing more it's hard to say but most likely there's not enough hair going through the bead. You need to have enough in it to fill it and apply enough resistance to sliding.
@@mikeulator I see, thank you.
Great video, made even better by wearing an awesome shirt.
Thanks!
Love the beads. This is the first video of yours I've seen and I'm now a subscriber!
Finally! Been looking at a few barbers doing viking style beards and all looked like hipsters. And here we are.. pure viking! Just a big beards and those lovely hand made beard rings :) 🇸🇪⚔️💪🏻
Yeah except there is no evidence of Viking beard beads. Oh well.
@@TM1Alan yeah I know, there are items in graves that are ate looking like them but they can’t proof they actually used them in their beards
Wondering what holds the beads, from sliding off?? GREAT JOB!!! Are these 4 sale ?? My beard is too my belt line..
I don’t sell these. Belt line beard??? Amazing!! I used little clear hair elastics to tie off the braids and then I pulled the bead down tight over the elastic.
Love it!
This looks really awesome. Love it.
Lovely
Very good job...send me six to Uruguay ....
Great looking stache and beard there-well done for growing it out. The beards look good in it too-great style-well done.
Thanks!!!
Looks great! I like the size and heft of those beads. I'm inspired to give it try
Nice bit of makers work dude!
Thanks!!
Beads builders time to grow an epic one
Imma do this 😁 Looks great!
That was great and your awesome to watch :D and for the record, you do look good in beard braids/beads :3
Such sweet words. Thanks :D
looks great
cool!
Thanks
Bad ass bro
Very good job. Thumbs up!
Thank you!
I would totally sport that hand made Odin bead in my beard dead center.
I love that!
Great build and entertaining video! 🤣
So glad you loved it!
Kinda meh with just the braids, totally awesome with some loose behind. Happy birthday!
Nice!
Looks really good 👍
Thank you! Cheers!
Good video man!
Glad to see the mill getting some love.
Was starting to think it was just a door stop and a place for Richard to put empty cans before they get taken to the recycle!
That was the new lathe! Lol. Mill is still best for holding empties!!!
@@DrawbridgeProps new???
When do I get to come play with it!!!
You have a project in mind?
@@DrawbridgeProps always!
Lol.
I do have a Ballock Dagger on my bench..
And a hunk of brass for it.
I also have a Damascus Seax I need a handle for.
If you are looking for content ideas I'd be more then happy to come let you boss me around in front of a camera!
Yes the beard beads!!!! My beard keeps catching fire and my dogs keep trying to chew on it;)
So it never gets too that length for beads.
Hopefully one day!
How very inopportune? Do dogs usually chew on burning beards?
Really cool! Question - how do you keep the beads in place? By just threading them on and leaving them, surely when you swing your head around they'd whip off and smash someone in the face? OK if that's their purpose, but seems a waste of effort ... ! 😊😊
Great. Now all I need is a $5,000 lathe, a mill, and some brass. Back where I started. Shit.
i say they are damn good and you should start making some for sell in the future lol
Awsome!! (I am from the Nord by the way :) )
Thanks Vampira!
Hahahaha honestly Man U come out with some great things to do
Thanks. I have fun in the shop for sure.
What size and diameter etc are they please? Great vid bro!
thanks! 1/2" round by 1.5" long
Happy 40th Birthday Levi
Dad
Thanks!!
Beard, braids, beads, Battlestar galactica
First decent viking beard I've seen dispatchers longer than 1 inch...... omg
Thanks!
I feel like you should have used a diamond burr to refine your profiles. Just my opinion
Thanks. I will next time.
Is there somewhere i can buy one of these?
Awesome idea! But how you fixed it on the beard? I think you can lose it in any moment...
My beard is smaller so i need just one of them :)
They stayed on pretty well:) could have recessed on end more.
Do you sell these?
Nice. Kinda want to try making some dread beads after watching this.
What tool did you use to carve the face into the brass? Almost looked like a drill but not quite.
Check description for links to tools. It's the foredom.
@@DrawbridgeProps
Dang that's a hefty rotary machine, thanks might actually get it.
Can I buy these beads???
How can I order one of those beads?
They are not for sale. But thanks for watching!
hey ! for those who wonder why his beard his red, it's because red is the most comon color of beard. Realy nice beads btw
Thanks!
Levi...... so jel that you can grow a long beard.
You will be able to one day!
The only bad part of this is knowing you cut it off.
I miss it :(
Cazzo sei bravo forte
Great Rings but Why that annoying sound track ........
sorry. can't please everyone.
Umm FUCKIN BADASS?
#bestcommentever
Why, why, why, the stupid music. Otherwise great video. What keeps those heavy brass beads from falling off?
Because i like the music. Hair elastics.
show me proof of Vikings having "beard beads". Come on now.