I noticed that the throttle locking nuts are both together. They are supposed to be one on each side of the plate where the throttle cable goes to the carburetor and that secures the throttle cable so it doesn’t move. You should fix that so it’s secure the way it should be.
I love the sound on your bike...my 150cc scooter sounds like a generator...getting bursts of air in like a popping mini explosion when going uphill sometimes on a straight road then it doesn't pull for a second and also m getting weird turning vibrations, i don't know where they are coming from but i feel it under my seat...anyway i want to get started on the conversion ...yours looks cool.
Broooo I’m a single dude who just separated from ex I bought a ruckus and want to swap so I can get a m license and just be able to do 60 I love it other than that.
Thanks! So mine just came with a spark arrestor that I took out. It’s very loud regardless and can get annoying on long rides. I’ve since added the Yoshimura low volume insert. It’s quieter but it does not have a deep sound anymore. I’ll probably just take it out soon.
@@trentdavis431 for one the bead is never gonna seat properly, tire beads are a specific shape to seat and seal properly, you lose any kind of sidewall support, the tire simply not designed for it.. you will have a smaller contact patch, aside from having rim protruding out from the tire itself is dangerous especially on a vehicle meant to lean... now I understand it's a grom, but still wouldn't want to lose a tire at 50 mph because the side wall slid off whatever it's sealing against, tires are not just a Ballon to carry air pressure..
It makes no sense doing any of this... You are swapping out a quality engine for a POS. If you want sh*t, just buy a 150cc icebear and mod it. You'll spend not even half the money. Sure, the Honda frame is better, but I would never put a Chinese engine in a Japanese bike. Shoulda went with a Yamaha engine. Modifications would be worth it and the outcome would be a much higher quality, longer lasting build
Sweet build dude! I appreciate the support 💯
Thanks! Couldn’t have done it without your awesome build videos and front end kit!
i like it! so pretty. love those wheels, and when she purrss, lovely! thanks for sharing this!😊👍
I noticed that the throttle locking nuts are both together. They are supposed to be one on each side of the plate where the throttle cable goes to the carburetor and that secures the throttle cable so it doesn’t move. You should fix that so it’s secure the way it should be.
I love the sound on your bike...my 150cc scooter sounds like a generator...getting bursts of air in like a popping mini explosion when going uphill sometimes on a straight road then it doesn't pull for a second and also m getting weird turning vibrations, i don't know where they are coming from but i feel it under my seat...anyway i want to get started on the conversion ...yours looks cool.
NICK
ua-cam.com/video/vnjRNz81MFs/v-deo.html
Do you feel like a 4” backspace on the rear wheel may have centered it out? Would it have clearance?
Any chance you could upload a list of the necessary gear needed to make the swap ?
Where did you purchase your jets? I'll be running the same carb and am interested in up-jetting.
Zoomer and ruckus are same or not.?
Post link to that rear rim bro!
I have a Yamaha c3 xf50 fuel injected directly liquid cool is it possible to convert your fuel injection with a regular carburetor
That throttle cable needs to be looked at. It isn't bolted down at the carb.
Nice build looks sick!! I need to get front pegs for mine where do i find em?
How complicated is adding that brake kit to that wheel?
Super easy if you buy the Rolling Wrench kit! Comes with everything you should need!
Where did you buy your Honda ruckus?
Can I just buy this off of you🔥🔥
A bike like that or similar cost about how much money?
How did you get both lights to work same time
Can a ruckus scooter engine be replace with a 38cc moto
Where did you buy the engine ??
Is that a Puch in the back i see?
Broooo I’m a single dude who just separated from ex I bought a ruckus and want to swap so I can get a m license and just be able to do 60 I love it other than that.
Newbie here, is it wise to buy a 2nd hand like a 2019 or a brand new one to start a project like this?
Way cool Bro...
Did you remove the baffle from the yoshi exhaust? Sounds good.
Thanks! So mine just came with a spark arrestor that I took out. It’s very loud regardless and can get annoying on long rides. I’ve since added the Yoshimura low volume insert. It’s quieter but it does not have a deep sound anymore. I’ll probably just take it out soon.
How much did it cost you to do that build?
What's the app for the speedo called?
10:00
🔥🔥🔥🔥🔥💯
I could be wrong but it sounds like your bike is bogging a little bit
Qual é o nome do site onde você compra essas rodas?
Ficou top 😎...
The parts list is blank
What's your top speed for the stock gy6?
My xpro150 cc gy6 which is the best so far runs around 70 but I weigh 180
And my scooter is 300lbs heavier than my stock rukus
Where did you get the wheel?
It’s an Aero Race Wheel 32 series in 4x4 lug pattern. I got mine on Amazon.
Where can I buy one/?
I can build you a custom scooter. Please send me an email if you’re interested.
@@elmosgarage157 Is 150 cc engine it legal in California?
@@elmosgarage157 what would that entail if I wanted one built I’m in Los Angeles CA
@@elmosgarage157 what’s your email
Not sure why you did a gy6 swap if you not going to go over 43mph. Seems like a waste of money. Good looking bike tho
Is this bike for sale ?
Not in a million years.
Dude....that tire is barely on that bead.id give it a couple more pounds or take it off and bounce it on the ground a little bit
Your breaking up because your carb is in a crazy position.
Muffler does not sound good. Nice build.
Loock tecnolog in scooters suspencyon ativa mecafroyd
Fatty wheel size please
Todos iguais todos iguais mais uns mais igual que os outros kkkkkkk
Too bad it’s a four stroke don’t get me wrong I have a four stroke but if that was a 150 cc two stroke oh my goodness.
your audio sucks bruh.. i wanna ear what you have to say but the background noise is just too much bruh
Stretching tires like that is a terrible idea
how? im just wondering myself.
@@trentdavis431 for one the bead is never gonna seat properly, tire beads are a specific shape to seat and seal properly, you lose any kind of sidewall support, the tire simply not designed for it.. you will have a smaller contact patch, aside from having rim protruding out from the tire itself is dangerous especially on a vehicle meant to lean... now I understand it's a grom, but still wouldn't want to lose a tire at 50 mph because the side wall slid off whatever it's sealing against, tires are not just a Ballon to carry air pressure..
It makes no sense doing any of this... You are swapping out a quality engine for a POS. If you want sh*t, just buy a 150cc icebear and mod it. You'll spend not even half the money. Sure, the Honda frame is better, but I would never put a Chinese engine in a Japanese bike. Shoulda went with a Yamaha engine. Modifications would be worth it and the outcome would be a much higher quality, longer lasting build