HOW TO GY6 SWAP A RUCKUS - parts you will need [LIVE]
Вставка
- Опубліковано 2 жов 2024
- All in one GY6 Ruckus swap kit:
www.rollingwre...
Basic GY6 Ruckus swap kit:
www.rollingwre...
GY6 harness:
www.rollingwre...
Ruckus disk brake kit:
www.rollingwre...
GY6 engine:
www.rollingwre...
GY6 exhaust:
www.rollingwre...
GY6 Ruckus Wheels:
www.rollingwre...
In this LIVE video (recorded earlier) I will show you all the parts needed to do a GY6 swap on your Honda Ruckus scooter. The GY6 will increase the power of your ruckus x3.
![GY6 RUCKUS [GROUND UP BUILD SERIES] Episode 1](http://i.ytimg.com/vi/0JBtGyh4xrk/mqdefault.jpg)
My GET died on my Metro, this sounds amazing and fun to do. I'm saving up for my 232 kit now that I know where to find an Actual expert.
When I did my gy6 swap I built my own motor mount and it was a 4 inch stretch. Any shorter and the valve cover hits the crossmember. But the handling was great at that wheelbase. I also had a second swing arm and added a second rear shock to the other side of the bike and turned some bushings out of delrin for a super stable rear end.
🤘y'all have a badass day🤘🍻🤘no limits🤘
Edit: I recommend the adapter harness. I scabbed the factory ruckus harness and the gy6 donor bike harness together to make things work. And when I say I built the harness what I mean is my buddy that knows what's up with wiring built my harness and I tried to help a little
🤘bwaahaahaa🤘y'all have a badass day🤘🍻🤘no limits🤘
Yeah you wasn’t joking. After your last UA-cam live, One of your subscribers always gives you a thumbs down🙃. Well brother I’ll give you two thumbs up👍👍👋👋👋😎!
Sweeet ! I appreciate the support
So after I heard you say a 150cc would only get you up to 55-60, that let me know that the struggle wouldn't be worth the payoff, considering I already hit 45 with my stock 2022 Ruckus. Thanks for saving me the time & money!
No problem :-) GY6 is will have 3 times the torque and power of a stock ruckus. You can get a stock ruckus engine to go 60 mph with mods or a GY6 engine to go 100mph with mods…. Pick your poison. Keep in mind all the numbers I share are a mile above sea level in Denver colorado. We loose 20% of our power at this high altitude. What ever you choose it’s fun stuff!!
My pcx 150 with ncy kit and dr pulley sliders gets 67mph and I weight 290lbs. But people that weight 150ish can hit 75mph so a lot depends on how much you weight.
the 150 will actually pull you up a hill without you getting run over. even the so called 100cc has no torque compared to the 150. You should probably get more education on the differences between torque and hp before making uneducated comments
45 on a stock Ruckus?!
How much do you weigh? 100 pounds?
@@Winterstick549 I'm about 150ish. But all Ruckus' go up to 45. Or maybe it's more like 43. To be exact. When you push it past the last notch, basically red lining it is 45(43). That's how I would drive it at all times before I sold it.
This guy EXPLAIN THINGS SO CLEARLY AND DETAIL IT MADE ME FOLLOW YOU!! I LEARN JUST ABOUT EVERYTHING I NEED FROM YOU!!
i think this guy is HIGH all the time when he explains stuff. like the pause...... oh yeah found the work to say... like WTF so unprofessional AF.
BRO REALY ROFL
God I want to put a Wankle engine lol
Need you to build me a Ruckus, thanks for helping me with that Reveno troubleshoot!
Hey bro I have a GY6 49cc TaoTao scooter and I transformed it to a 94 CC as you know and I did a lot of mods to the engine so I don't even believe it's a 94 anymore believe it's like a hundred something and anyways I was wondering what else can I buy at your shop like do you have anything for TaoTao is like. Do you have in front tire axle performance one that I could buy for my GY6 TaoTao there's really not a lot of performance parts you can get for the Chinese TaoTao is really frustrating. Everything is always for the Ruckus or the Ruckus clone
I have 2021 venom x18 wanting to do a bigger rim wider in the back. And a 200cc engine. But how would I do the back wheel or find wheels
Controls wack
I saw Australian branded Hunter Scooter and IMHO it beats all Ruckus mods. It is 181 cc, designed as clone and maintain a speed comparable to 200cc motorcycle on Australian roads (max speed limit 100Km/h. The speed, stability, brakes, safety all looks nice and well in proportion.
I one of the motorcycle expo (forgot when and where but in 2023 or 2024, a complete ruckus mod by Honda on display. (I think it may have cost them over 10K. This piece of art would probably go on display in museum eventually.
Im STRONGLY considering getting the ruckus. It looks better than the Navi. The only issue is i way 300lbs & that 49cc bike is barely gonna move lol. Im in cali & i wanna avoid having to register it & all that --it. Is there a way to have it look stock from the outside but have better internals 4 more performance? I wanna be able 2 hit 50mph w/o really straining the engine.
Does this kit only work with ruckus or anything with a GY6 mount? I have a scooter with a GY6 150 QMJ157 and I would like to do a stretch on it with a wide wheel. My scooter has a bolt on right side swing arm as well. Does this kit eliminate that right side swing arm piece?
I'm still wondering how hard it was be to swap a Navi to a GY6..
Great job man. wire in a cigarette lighter, plug in a 5.1v USB charger and walla . There is your easiest way, and stable too ! Just have to sacrifice a USB cable and splice it. It is interesting to observe the different voltage combinations there are in a five wire USB cable. Enjoy your shit man !
Dam, you deserve a BIG RED Apple for this Sean.
Does it matter what year of ruckus you begin with? Or will one of these kits bolt up to any year so far? Looking at a 2011 to swap.
So if I already have a parts bike that runs and has the 150cc gy6 motor I should only need the motor mount and then decide if I want to stretch it or not.
sounds like it.
i think this guy is HIGH all the time when he explains stuff. like the pause...... oh yeah found the work to say... like WTF so unprofessional AF.
Nope! Thats just me being me brotha!
Can you give me sites where I can order stuff for my Zoomer in Belgium? Thanks’
Or just buy a MadDog 150cc and save $1000's????
You can do that for sure if you are trying to save money. As long as you know there is a huuuge quality difference. You honestly can’t even compare the two. The only thing the same is the engine. Everything else is very very low quality. The good news is, the parts can be upgraded. But then begs the question. Should I have just built a GY6 Ruckus?
could I substitute the wheel hub for cheaper alternatives? im balling on a budget rn
Yes definitely. But remember safety is important too.
Why is it only 7.5 hp in 150cc when my 125cc cymco movie have 10 hk and easily do 100 km/h, a 50cc moped can get to 7.5 hp 😅
Kymco has a gy6 B, which has bigger valves and better porting
thats k9ndastupid to say if they swap the 150cc motor in the ruckus right don't make scene
?
I need stretch kit for IB Q6 150cc
Slam. That was a slam on the. Maddogs. Lol dam well I'm lookin for a 150 motor to out in my maddog vmatttt
The good news is maddogs need the upgrades too. I’ll have all the same upgrades for your maddogs. The point is, if you are gy6 swapping a ruckus, don’t make it a maddog. Otherwise why don’t you just buy a maddog. I have nothing against maddogs, but I do have a lot of issues with some of the parts they use.
Do you sell Ruckus already customized?
No. But it’s possible in the future
@@RollingWrench how far in the future?
just buy a BWS and be happier right out of the box
That a completely different scooter. It’s a good one. Just not the same.
Great video! love you mom!!
I Love💓💓
Very nice Matt I be getting a Ice Bear Maddog 150cc Trike and I like upgrade the engine to 171 or 232?
Ok now I bought mines already bored out to 100cc but I want to change the stock wheels to some 12 fatty boys what do I do?
Looks like your kit comes with an A block, will it work with a B Block?
Ya it does. It will work with a B block as well. The only time you need to worry about fitment on a B block is when you do big bore kits or a variator.
can I order just the engine mount? I'm trying to put my gy6 into an old XR80 frame
It would be way better to do the swap using a Honda Elite ch250 engine . You have a Honda Ruckus, it makes sense to put in a Honda engine...
You would think. But the stance looks way off and parts are not available for the swap. It would be a lot of fabrication time to figure it all out. The GY6 has a platform already. Most people, if they want all Honda will do a PCX swap. There parts are available for that set up.
Do you ship to California
where can I get that rim 1 set
What would it cost for gy6 honda Rukkis 150 -200 cc
Young man I think you'd make a lot of money building and selling conversions
Better quality in Taiwan? All your parts come from Taiwan?
Hey do you know where I could get some Michelin tires for these bikes?
Hi! Is the swap possible for euro efi version (zoomer)?
Feeling generous?! 🥺
Is there a way to do something similar to a Navi?
Not that I know of… yet
Hit a gnarly speed bump and there goes half the bike
True story
@@RollingWrench people make fun of me because I got the zuma but believe it or not mine is mostly stock and I be passing most Honda ruckus they may look cool but I go for speed and power sometimes it ain’t always about good looks
So I'm considering doing a gy6 swap but don't have the money to mod it out so fancy I have decided on a short case but I haven't found anything telling me what I need for a shortcase swap. If the case is shorter do I need all the extra stuff that's what I'm hoping for. Thanks.
A short case won’t work unfortunately:-( it has to be long case. This is the cheapest least fancy kit, it comes with everything you will need excluding the rear wheel and exhaust:
www.rollingwrenchdenver.com/products/honda-ruckus-gy6-conversion-kit-oem-look?ToPasteboard
Great videos I’m trying to star a project my self in o e of this but I don’t know where to start if you could direct me where to buy the frames and start from there I’ll highly appreciate it
Hey brother I'm new at this! I bought a piece of junk 2003 gy6 ruckus!! I'm becoming a member and trying this by myself so thank you in advance for explaining everything for dummies like me!! Your the man bro!!
Sir.. any idea for replacement for gy6 ER150n rubber head gasket?.
I don’t see the point of buying something to modify the whole thing into something else. Just buy a real bike.
It’s called a hobby brotha! Guys that have these don’t want a “REAL BIKE” or we would have bought something else
@@RollingWrench I think you missed the point.
@@Ummmmmkay88 it definitely sounds like one of us is confused.
sounds like the gremlin bell for motorcycles
Amigo dónde puedo comprar una compresión para hacer más cc a mi honda rukus de fabrica ??? Please
They sell a aftermarket car stereo bypass to get to your setting and video playback while drive that dose the same thing that your described for the fuel pump.
Any chance this works on a navi?
How much for everything
www.rollingwrenchdenver.com/products/complete-honda-ruckus-gy6-swap-kit?ToPasteboard
I thought the stock Ruckus engine was about 4 hp.
bo this kit is ridiculously expensive, could I just find similar parts for a lower price separately? do I have to use this kit?
You tooootally do it cheaper. Just remember, you pay for what you get in the ruckus world
No Replacement for displacement
Your plug n play wire harness 's match right up to Rukus , does it also hook right up to a Chukus? Also is a Chukus fuel pump vacuum fed?
Chuckus fuel pump is vacuum actuated
Thanks so much for making this video
Can i purchase these in shoppe app?
love it...!!!!! the best........
personally like the taller seat so much better since im 6'2
I don’t blame you
Funciona con honda elite 125cc???
in Thailand the Get engine have being modified from 50cc to 125cc and the CVT also modified and it can reach 130kph or more
Thailand is my favorite place on earth. We have toys compared to the engines you have 💯
Can i stretch a 50cc ? Without out changing it to 150 cc or higher?
Yes. Here is a link www.rollingwrenchdenver.com/products/getstock-engine-wide-tire-billet-engine-mount-12-5-inch-stretch?ToPasteboard
@@RollingWrench and what are kits by the way ? Im just gettin into the ruckus scene
@@leifbergado6125 I can help you one on one. Get this:
www.rollingwrenchdenver.com/products/parts-estimate
@@RollingWrench do i need a shop to put things in place or i can do it on my own place?
How hard would it be to swap out a 50cc chuckus to a 150cc?
You'd need to weld some mount points because the 50cc is bottom mounted, 150cc is top mounted
Where can I get electric fuel pump at ruck shop ??
Partzilla is a good option for oem parts
Welcome to 2009...let me show you the coolest swaps of the era?
More like welcome to 2002 when the ruckus came out! It’s alive!!!!
have you looked into a GY6 swap for a c3? i havent been able to find anything on that. and id like to build a powerful-ish, c3
There is no mount currently available…. My gears have been turning :-)
Can this hold someone around 300 pounds ?
Ya
$2,200 what a waste,to upgrade a mini bike,just go buy a adult motorcycle.
Nice video!!!
How much is this upgrade costing,you could buy a real bike for that money.
Do you know if I can swap out a 2020 maddog 50cc to a gy6 150cc. If so do you have a few necessary details ? Thanks
That would be a gen 5 maddog. Or what would you suggest for more power. Thank you
The issue is your 50cc mounts from the bottom and the GY6 150 mounts from the top. It can be done if you know how to fabricate. Otherwise you can bore up the qmb139 engine you have. Here is a link www.rollingwrenchdenver.com/products/chinese-scooter-80cc-big-bore-kit
Are alot of your parts plug n play compatible
just sell it and get the mad dog 150. unless you are in california :(
out of nowhere.can i put a gy6 125 stator on a gy6 50 or 80?
No :-( nothing will transfer over from that engine it’s completely different
@@RollingWrench thankyou
Just put a minarelli aerox engine
That’s another option.. so many of them with the Honda ruckus
I have a metropolitan and I’m just looking forward for you to do one 2t .
Me too, I’m trying to see how this kit would fit on the 02-12 metropolitan
What do you do with the ground wire
It attaches from the negative of the battery to the starter mounting bolt (2 ground wires on top of each other)
Can u build me one i have the motor i want to use i just need it built
We don’t do customer work anymore
I asked the same thing a couple weeks ago
@@RollingWrench why not?
@@kushpaladin It doesn’t align with my vision. It’s super time consuming and takes away from achieving my goal. Soon I will be offering a spot on our site for my my preferred builders. However I will be building bikes to raffle off on the channel :-)
Maestro!!!!
I understand the concept, geological restrictions of parts availibility and business side of fitting a gy6 into a ruckus since those engines are widely available but for a personal project I have a suggestion: fit a horizontal Piaggio engine into that frame?
You could do it. You would need to fabricate a mount and hub, along with build a harness. It definitely wouldn’t be simple. The real question is why? The GY6 is extremely reliable and the power of a 232cc is great! At around 22hp
@@RollingWrench Answer is simple. It would be something totally different and 2t extravaganza!
@@EinarLerschen ahhh 2t yess
@@RollingWrench Now we're on the same page :D
@@RollingWrench the real reason is power u can make up to 50hp with the Piaggio engines but then it's almost 300cc
Thanks Matt, you must be reading my mind, my get is still acting up and I am about to give up and swap!
Dang Carl!
Can you mount a pull start
Probably… that would be wild. Like a ATV has
@@RollingWrench yes and no I'm making a gy6 ruckus but I don't want the kick start I want a pull start only other issues are wire plugs not match kits
Not a moped so make sure y’all get ur fuccin insurance right
After the Marshall Fire I’m contemplating a Ruckus build to replace the Monkey project I had previously. In Colorado, the 49cc stock ruckus is considered low powered, do you know the requirements for license plating after a gy6 swap?
Depends on your state but most states anything over 49cc is considered a motorcycle and will need plates, insurance, and your endorsement.
Honestly I just keep moped plates on my 150 swap ruckus 😂
@@jamezzz7646 that's the smart thing to do.
don't register it as 150 they wont know
@@markusoja some people are stupid,they follow the rules and don't break laws.
Dont put "how to" to the title if youre not gonna do it, all i heard is you talking and no work
Just buy a Harley if your not to Scared.
Mucho bla bla bla y poca acción
This was a walk though not an install brah!
Me