Відео

Do you feel like a 4” backspace on the rear wheel may have centered it out? Would it have clearance?

Broooo I’m a single dude who just separated from ex I bought a ruckus and want to swap so I can get a m license and just be able to do 60 I love it other than that.

A bike like that or similar cost about how much money?

If you plan on riding it on the streets most states require front and rear turn signals. You can actually get a ticket if you get pulled over for no front turn signals.

Why not put the motor on so you have the center stand from the motor to help hold the bike up. Electrical should be the last things to be put on. The main things that should be put after the frame is put together is the forks then the motor then the front wheel. Then you have a rolling bike you can move around if needed. Then you do the electrical and the rest of the components. The reason for putting the motor on after the forks is because the motor has the center stand. Makes it easier to work on.

Always put it on something to help putting it back together easier. Work from one end to the other. I like going from back to front especially on a scooter because the motor has the center stand and has the most weight.

Mistakes made on putting the forks in or front part in was not putting some grease in the bearing cups. Then putting loctite on the locking nuts for the steaming. You don't use loctite on the front steering. You only use it on bolts and nuts like on the frame or anything that can rattle or shake loose. The forks don't need loctite.

Post link to that rear rim bro!

Hii aym mi fooma silankan halp me

Hiii

I could be wrong but it sounds like your bike is bogging a little bit

Too bad it’s a four stroke don’t get me wrong I have a four stroke but if that was a 150 cc two stroke oh my goodness.

Not sure why you did a gy6 swap if you not going to go over 43mph. Seems like a waste of money. Good looking bike tho

That throttle cable needs to be looked at. It isn't bolted down at the carb.

Where did you buy the engine ??

🔥🔥🔥🔥🔥💯

Nice build looks sick!! I need to get front pegs for mine where do i find em?

Fatty wheel size please

a littel trick there is a bit of paint in the threds from the factory. it will hold the bolt in.

The parts list is blank

your audio sucks bruh.. i wanna ear what you have to say but the background noise is just too much bruh

hello, i need the size of a few pieces, can you help me?

Newbie here, is it wise to buy a 2nd hand like a 2019 or a brand new one to start a project like this?

It makes no sense doing any of this... You are swapping out a quality engine for a POS. If you want sh*t, just buy a 150cc icebear and mod it. You'll spend not even half the money. Sure, the Honda frame is better, but I would never put a Chinese engine in a Japanese bike. Shoulda went with a Yamaha engine. Modifications would be worth it and the outcome would be a much higher quality, longer lasting build

What's your top speed for the stock gy6?

i like it! so pretty. love those wheels, and when she purrss, lovely! thanks for sharing this!😊👍

Can a ruckus scooter engine be replace with a 38cc moto

How much did it cost you to do that build?

How did you get both lights to work same time

Zoomer and ruckus are same or not.?

I have a Yamaha c3 xf50 fuel injected directly liquid cool is it possible to convert your fuel injection with a regular carburetor

Where did you purchase your jets? I'll be running the same carb and am interested in up-jetting.

Stretching tires like that is a terrible idea

Can I just buy this off of you🔥🔥

Loock tecnolog in scooters suspencyon ativa mecafroyd

10:00

Where can I buy one/?

Thanks alot bro ! I'm trying to restore my old 2003 honda ruckus it was so helpful,,,,,so appreciated! huge respect from south korea

Nice!! This is old but it something I needed to learn more about ruckus please do more to teach beginners.

I noticed that the throttle locking nuts are both together. They are supposed to be one on each side of the plate where the throttle cable goes to the carburetor and that secures the throttle cable so it doesn’t move. You should fix that so it’s secure the way it should be.

Todos iguais todos iguais mais uns mais igual que os outros kkkkkkk

What state do you operate out of?

Just did a GY6 swap on a customers Ruckus and all I can think is that for the money order the Mad dog 150 otherwise your just throwing money away

Any chance you could upload a list of the necessary gear needed to make the swap ?

I love the sound on your bike...my 150cc scooter sounds like a generator...getting bursts of air in like a popping mini explosion when going uphill sometimes on a straight road then it doesn't pull for a second and also m getting weird turning vibrations, i don't know where they are coming from but i feel it under my seat...anyway i want to get started on the conversion ...yours looks cool.

Exactly what I been looking for

Guessing this never worked out to well for you? No new videos since this.

What's the app for the speedo called?

Your breaking up because your carb is in a crazy position.

Dude....that tire is barely on that bead.id give it a couple more pounds or take it off and bounce it on the ground a little bit