I think some of these scooter companies should give you the designation as Master Scooter Tech plus you've proven yourself to know probably more then the actual techs themselves. Impressive and an excellent detailed video as always... 👍👍👍
Hey been doing scooter stuff since 2009 😄 lately I just focus on VW bus restoration, GoPro tips and other stuff on other channel micbergsma … not much drone videos lately… but I still fly DJI :)
Thank you!!!! Was just about to do an engine swap and your video was super timely. I feel confident to remove the engine now. Do you have any tips to removing the rear wheel from the engine?
You’re welcome!! Happy to help out! Push the arm on left side near final drive oil bolt on left side behind CVT cover so wheel will lock up while using wrench to loosen the bolt
Mitch. You can put old socks on your hands as you clean your scooter. It works best with thick old white socks. You can really get out the dirty oil deposits and dirt.Try it!
Hello Mitchs, I have been watching videos of a repair on a 1994 80cc Honda elite. I have a 1984 Honda elite that has not been started for 15 years. What do you recommend I do to get it working again? Greetings, I await your response. Thank you.
Hey, what I would do is, take carburetor out to clean inside and jets, new battery, replace spark plug, check air filter - replace if so dirty, drain old fuel, look inside of gas tank to make sure no bad rust inside and clean fuel filter tube then try to start scooter from there :)
😂 I loved my Ruckus until i decided to work on the carb. I hated having to remove the seat and floorboard everytime I made a change. I sold it before i really got it working right. I wish Honda would put FI on them.
T O O L S
Pliers - amzn.to/2orfn7K
Nose pliers - amzn.to/2yetDDj
Ratchet 3/8 drive - amzn.to/2hhmnUs
Breaker bar 3/8 drive - amzn.to/3lrjIWj
12mm open wrench - amzn.to/3cjpou9
8mm socket 3/8 drive - amzn.to/2xLNVXU
10mm socket 3/8 drive - amzn.to/2xGuLSF
12mm socket 3/8 drive - amzn.to/2xM4Edr
14mm socket 3/8 drive - amzn.to/2xGn4Ms
Phillips no. 2 screwdriver - amzn.to/2fgdZDL
17mm socket 3/8 socket - amzn.to/2EMT6LO
3" / 6” extension set 3/8 drive - amzn.to/2h7ypMl
Container / bottle / Oil pan - amzn.to/3bOmT5Q
I think some of these scooter companies should give you the designation as Master Scooter Tech plus you've proven yourself to know probably more then the actual techs themselves. Impressive and an excellent detailed video as always... 👍👍👍
Thank you Ron! Always hopeful I'll get a scooter company sponsor one day!
Thank you for this ruckus video Mitch !!
I started doing my own maintenance on my ruckus with your videos !
You’re welcome! 😄🙌🏼
Seeing that old black screwdriver again with all the bits in the handle makes me so happy.
😄👍🏼 love craftsman tools
Mitch you do Scooter Stuff now?! I always wondered what happened to your Drone Channel! Awesome to see you in something different!
Hey been doing scooter stuff since 2009 😄 lately I just focus on VW bus restoration, GoPro tips and other stuff on other channel micbergsma … not much drone videos lately… but I still fly DJI :)
I watched this for my Honda Metropolitan, because they are almost identical. Thank you.
That's awesome, I just got Metropolitan last month... will make videos of it soon :)
¡Gracias!
Thank you for the huge support! ❤️
Honda Lucas is popular in Korea. Please show us a lot of maintenance videos 👍🏽👍🏽
Hey I never heard of Honda Lucas, someone should ship one to Hawaii for me to make videos 😄🤔
Zor işler senden sorulur. Mutlaka başarılı olacaksın.🎉🎉🎉
👍🏼👍🏼
Thank you!!!! Was just about to do an engine swap and your video was super timely. I feel confident to remove the engine now.
Do you have any tips to removing the rear wheel from the engine?
You’re welcome!! Happy to help out! Push the arm on left side near final drive oil bolt on left side behind CVT cover so wheel will lock up while using wrench to loosen the bolt
Mitch. You can put old socks on your hands as you clean your scooter. It works best with thick old white socks. You can really get out the dirty oil deposits and dirt.Try it!
Haha! I did that before when I lived on Mainland, I don’t have any socks since I live in Hawaii 😂
I got my hopes up thinking you were going to drop in a zuma 2stroke, Darn lol 🍻😄
Haha!
Nice job Mitch!
Thank you! Cheers!
Much appreciated tutorial!
When will you make GY6 tuned
Anytime! 🙌🏼
Hello Mitchs, I have been watching videos of a repair on a 1994 80cc Honda elite. I have a 1984 Honda elite that has not been started for 15 years. What do you recommend I do to get it working again? Greetings, I await your response. Thank you.
Hey, what I would do is, take carburetor out to clean inside and jets, new battery, replace spark plug, check air filter - replace if so dirty, drain old fuel, look inside of gas tank to make sure no bad rust inside and clean fuel filter tube then try to start scooter from there :)
hey! What if my cylinder gets damaged? How can I buy a new cylinder for it?
Hey, get new one on partzilla website
😂 I loved my Ruckus until i decided to work on the carb. I hated having to remove the seat and floorboard everytime I made a change. I sold it before i really got it working right. I wish Honda would put FI on them.
Oh man yeah FI all the way!
Judging from the bird’s sound, I think this is not in USA, the birds sound like where I came from ( Thailand) but if it is, probably Florida.
Maui Hawaii 😄🤙🏼
That made me nervous just watching
🫣
That’s a nice looking shop lol, elephant ears in the back ground😊
Haha roofless shop 😂 thanks!